Commit graph

487 commits

Author SHA1 Message Date
nvt-se
dd082f7fcf improvements to lpp based on code from Adam and discussions with Thiemo.
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
d8caaca289 listen time and off time parameters configurable from outside because cc1020 needs longer listen time. 2009-03-26 12:50:57 +00:00
adamdunkels
73fdf05940 Added const to constant parameters (rime addresses) 2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259 Added explicit typecast to buffer definition 2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac 2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9 Send announcement packets only if there are any announcements to send 2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174 Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary. 2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d Fixed minor bug in comment 2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18 Made constant addresses const 2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548 The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers 2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb Send an announcement packet only if there are more than zero announcemnets 2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6 removed unused prototype 2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722 use u8 when writing rime addresses. 2009-03-21 20:53:06 +00:00
nvt-se
4b6c110706 fixed documentation typos. 2009-03-17 20:28:44 +00:00
nifi
f0e56df2eb fixed compiler warning when timesynch is disabled 2009-03-17 09:57:01 +00:00
nvt-se
13b364bcc1 fixed documentation typos. 2009-03-15 20:29:04 +00:00
nvt-se
41ca9516a7 fixed documentation typos. 2009-03-15 20:21:16 +00:00
adamdunkels
fb8fab739a Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels
537219bf27 Added a packet attribute to specify transmission power on outgoing packets 2009-03-11 20:33:17 +00:00
zhitao
f304941ab4 raise busy forwarding flag before sending 2009-03-10 14:07:41 +00:00
julienabeille
2a173b465a more printing in debug mode 2009-03-10 08:00:59 +00:00
zhitao
1eb085834f Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes. 2009-03-09 12:54:27 +00:00
adamdunkels
a1260c0c1f Documentation updates 2009-03-08 21:43:24 +00:00
adamdunkels
366ad7bece Added Rime documentation from the Rime/Chameleon paper (SenSys 2007) 2009-03-07 11:15:46 +00:00
zhitao
0a12098bd5 avoid ping pong packets during route disruption 2009-03-06 17:33:59 +00:00
adamdunkels
dc7491f810 Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option) 2009-03-05 19:37:52 +00:00
zhitao
64badeb282 bugfix: use memcpy() to get attributes longer than a byte properly written to packet header 2009-03-05 13:51:28 +00:00
zhitao
08b2315f41 bugfix: put up busy forwarding flag only after next hop found 2009-03-04 08:59:32 +00:00
fros4943
f701615afa bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels
9816f49fe6 Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy 2009-03-02 22:00:41 +00:00
adamdunkels
78591a003f Minor documentation update 2009-03-02 21:56:16 +00:00
adamdunkels
45e32894a0 Bugfix: backwards definition of MIN macro (quite embarassing) 2009-03-02 11:22:09 +00:00
adamdunkels
d813d343c5 Cleaned up old left-over code 2009-03-01 20:38:57 +00:00
adamdunkels
7010eb84b8 Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted. 2009-03-01 20:37:16 +00:00
adamdunkels
aa2f7a3399 Made polite announcement times configurable, added missing right-brace 2009-03-01 10:43:57 +00:00
adamdunkels
3adf8e5807 Call output packet sniffers after the MAC has sent the packet 2009-03-01 10:29:50 +00:00
oliverschmidt
bc3d9d2e3c Minor rearrangement. 2009-02-28 11:57:46 +00:00
julienabeille
f95c5df7d9 The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot 2009-02-25 08:35:52 +00:00
adamdunkels
2aedc8490d Compile only if timesynch is enabled 2009-02-20 21:23:22 +00:00
adamdunkels
e6907a1d8b Include random.h 2009-02-20 21:22:39 +00:00
adamdunkels
4ec5167276 Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it 2009-02-20 21:21:56 +00:00
julienabeille
10deaa6fc6 Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds 2009-02-20 07:59:35 +00:00
julienabeille
710e5c621c changed timer to stimer for neighbor, prefix, default router, address list 2009-02-19 16:42:41 +00:00
fros4943
97f76126e6 remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course) 2009-02-17 12:40:18 +00:00
c_oflynn
8516626703 Fixed documentation error (thanks to David Kopf) 2009-02-17 01:28:28 +00:00
adamdunkels
36bb3ece64 If no neighbor is found, we listen for announcements. Cleaned up debug output. 2009-02-16 01:18:53 +00:00
adamdunkels
aaa8c9d2c9 Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too. 2009-02-15 22:05:06 +00:00
adamdunkels
e4b1ff461e Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS 2009-02-14 20:35:03 +00:00
adamdunkels
585620c102 Reverted the recent change from random_rand() to rand(). It turned out that
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00