Philippe Rétornaz
ddc8120d7c
cc253x: Add p2 interrupt handler
...
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.
See Pull Request #18
2012-11-01 17:41:11 +00:00
George Oikonomou
fa5a38666b
Removed redundant #else blocks
2012-09-20 15:09:15 +01:00
Philippe Rétornaz
48d99f15c8
cc253x: fix dma interrupt enable flag
2012-09-07 17:32:54 +01:00
George Oikonomou
c6ec22c4c8
cc2530: Added a method to maximise stack depth
...
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz
666ff6ca55
cc253x: use a uint8_t for sleep_flag
...
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
George Oikonomou
8699f7741d
Fixed typos and a stray printf. Adjusted comments
2012-09-07 17:31:25 +01:00
George Oikonomou
26a87ee9cb
Improved handling of cc2x3x rf_flags
2012-07-11 10:53:14 +01:00
George Oikonomou
43f2790357
Added channel_get() to the cc2x3x RF drivers
2012-07-11 10:53:14 +01:00
George Oikonomou
d66241fd97
Bugfixed the cc2530 LOW_POWER_RX configuration
...
Report and fix by Tom Xiao
2012-07-11 10:53:14 +01:00
George Oikonomou
4b73b48f60
Fixed the cc2530 RSSI adjustment
2012-07-11 10:53:14 +01:00
George Oikonomou
47db065034
Bugfixed the cc253x UART0 init (Thanks, Deng Jian)
...
The flush instruction was resetting the stop bit level to 'low'
2012-06-06 15:25:57 +01:00
George Oikonomou
1f7171f943
Adjust cc2x3x ports to the new clock API
2012-05-16 15:22:31 +01:00
George Oikonomou
0d4b90c42b
cc2530 watchdog improvements and cleanup
2012-05-16 15:22:31 +01:00
George Oikonomou
e95f94a9a8
Added support for reading MAC from the cc253x flash
...
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
David Kopf
cac4e9a222
Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
...
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
George Oikonomou
57969259ce
cc2x3x clock_delay(len) now delays for approx. len usecs
2012-04-03 16:26:11 +01:00
George Oikonomou
242e02658f
The cc2530 UART driver was sending a 0 down the line on init
2012-04-03 16:26:10 +01:00
George Oikonomou
b3de052e01
Ported the stack-friendly clock ISR code over from cc243x to cc253x
2012-04-03 16:26:10 +01:00
George Oikonomou
ffa3a1c4c3
cc2x3x clock driver cleanup
...
* Bit-Addressable SFRs are now accessed as such,
instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
2012-04-03 16:26:10 +01:00
George Oikonomou
ad256e5014
New platform: TI cc2530 Development Kit
...
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00
