adamdunkels
9ecc0437f4
Left-over debug printf removed
2010-10-25 12:25:39 +00:00
adamdunkels
77ecfb0366
Rewrote parts of the retransmission logic so that collect is robust against the situation where the MAC layer will fail to callback after a packet has been transmitted.
2010-10-24 21:08:19 +00:00
adamdunkels
34cba78ca8
Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change
2010-10-19 07:34:29 +00:00
oliverschmidt
2f89e69ff7
Fixed build for platforms which use the default value for QUEUEBUF_NUM.
2010-10-12 19:51:28 +00:00
adamdunkels
37adf130b4
Rewrite of the congestion logic. A node now report it being congested
...
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.
Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
2010-10-11 23:42:01 +00:00
adamdunkels
0cabe483c3
Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection.
2010-10-07 15:52:28 +00:00
adamdunkels
ad35c54473
Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value
2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb
Turned the DRAW_TREE debug flag off by default
2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53
Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets.
2010-10-04 20:27:50 +00:00
adamdunkels
605392522f
Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them.
2010-10-03 20:08:44 +00:00
adamdunkels
32ba90ea4c
Bugfix: make sure that neighbor exists before attempting to update tx
...
count.
2010-09-28 06:53:02 +00:00
adamdunkels
eed22a6f3c
A number of changes to the collect code:
...
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
2010-09-22 22:08:08 +00:00
adamdunkels
18e31f33b9
Minor tweaks. Removed debug output from CVS.
2010-09-14 06:48:36 +00:00
adamdunkels
591766e663
Significant improvements to the Collect protocol:
...
* Loop detection and untangling. Now uses in-band loop detection that
works.
* Link quality estimation. Now starts with a conservative /
pessimistic estimate for new links.
* Retransmissions. MAC layer and network layer retransmissions are now
decoupled.
* Loss handling. Deals better with losses now.
* Concurrent applications. Each connection now maintains its own
neighbor table with separated cost to sink estimates for each
connection.
2010-09-13 13:28:14 +00:00
adamdunkels
4e0744954a
Rewrite of important parts of the Collect logic: link estimation
...
calculation and parent selection. This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
2010-09-08 19:21:45 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
adamdunkels
2647f879c2
Bugfix: select the best parent if current parent is NULL
2010-06-14 06:54:47 +00:00
adamdunkels
3d10dedecf
Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages.
2010-04-30 07:33:51 +00:00
fros4943
59357e8b75
PRINTF():ed debugging output
2010-04-01 11:08:36 +00:00
adamdunkels
d7457bc340
Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway).
2010-04-01 10:03:19 +00:00
adamdunkels
4c3b69dc07
Configuration parameter for number of MAC-layer retransmissions
2010-03-29 21:52:25 +00:00
nifi
9508d2c4d7
* Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
...
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
adamdunkels
a4f9e62295
Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API.
2010-03-25 08:51:07 +00:00
adamdunkels
7b0606cd58
Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module
2010-03-19 13:17:00 +00:00
adamdunkels
36b995cc9a
Reenabled announcement support
2010-03-16 18:12:34 +00:00
dak664
0236c6e725
Leave compiler warning for 16 bit timers
2010-03-12 17:51:07 +00:00
dak664
52c9f4bde3
Remove compiler warning
2010-03-12 15:21:14 +00:00
adamdunkels
5a6fc2ade0
Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly
2010-03-09 13:21:28 +00:00
dak664
c65e09ceb2
Remove compiler warnings
2010-03-02 15:41:23 +00:00
adamdunkels
ec928a2a19
Make max queueing time depend on retransmission timeout
2010-02-28 14:15:58 +00:00
adamdunkels
7165a3866f
Significant rework of the Contiki data collection protocol:
...
* the new version makes use of MAC-layer feedback so that bad paths
can be identified quicker and then avoided.
* the new code uses transport layer ACKs that contain feedback from
the collect protocol: when a packet cannot be forwarded due to lack
of resources, the ACK contains a flag that indicates that the packet
could not be forwarded. ACKs also contain the routing metric of the
sender, which improves agility in face of rapid path changes.
* loop detection and management has been improved: with higher path
metric agility, the system is more prone to short-lived routing
loops. Instead of dropping looping packets, the new version adjusts
the routing metric for the routes that exhibit loops so that the
risk for future loops is reduced.
* make use of packet attributes to inform the MAC layer of how many
times packets should be retransmitted.
2010-02-28 09:18:01 +00:00
adamdunkels
0eade2886c
Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks
2010-02-23 18:35:23 +00:00
adamdunkels
4a522c96dd
Added debugging statements for packet drops
2010-02-08 21:59:49 +00:00
adamdunkels
d7b7b05d0e
Moved the neigbor_init() call to the collect module, since it is the only one that currently uses it
2010-02-03 20:38:33 +00:00
adamdunkels
f66cd6d44e
Increased the forwarding queue to six packets to improve collection robustness
2010-02-02 21:44:05 +00:00
adamdunkels
56218aba3b
Made rimeaddr_t pointers const where they should be.
2009-11-08 19:40:16 +00:00
nvt-se
33909cc2fd
made neighbor discovery method configurable. default is announcements.
2009-05-30 19:54:05 +00:00
zhitao
48d4800f08
removed reference to undefined function in mspgcc
2009-05-06 15:34:28 +00:00
adamdunkels
f5a57a4e54
Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)
2009-04-30 20:21:06 +00:00
adamdunkels
e70cf0c7c6
Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.
2009-04-29 20:48:57 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
zhitao
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
zhitao
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
adamdunkels
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
adamdunkels
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
adamdunkels
3670ef2f44
Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery
2009-02-09 20:58:25 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
