adamdunkels
c83c5c4c55
Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception)
2009-05-04 11:23:30 +00:00
adamdunkels
f5a57a4e54
Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)
2009-04-30 20:21:06 +00:00
adamdunkels
e70cf0c7c6
Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.
2009-04-29 20:48:57 +00:00
adamdunkels
c489b1118d
New module: packetqueue. The packetqueue module maintains packet queues for other modules.
2009-04-29 20:47:30 +00:00
adamdunkels
c9df0ab123
Bugfix in debug message printout
2009-04-28 14:01:46 +00:00
fros4943
7810d362a6
minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer
2009-04-16 14:32:01 +00:00
nvt-se
c0fb680f12
simplified code by using udp_broadcast_new.
2009-04-13 19:55:15 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
adamdunkels
ace6567815
Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions
2009-04-06 21:20:35 +00:00
adamdunkels
be1c8ccec9
Added debug printouts
2009-04-06 21:19:34 +00:00
adamdunkels
d02ac74bbc
Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers
2009-04-06 21:19:00 +00:00
nifi
eab96e9b53
added rime-udp.c
2009-04-06 14:10:57 +00:00
nvt-se
d6869018c7
turned off debugging.
2009-04-06 13:27:37 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
nifi
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
adamdunkels
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
adamdunkels
a1260c0c1f
Documentation updates
2009-03-08 21:43:24 +00:00
adamdunkels
366ad7bece
Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)
2009-03-07 11:15:46 +00:00
zhitao
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
zhitao
64badeb282
bugfix: use memcpy() to get attributes longer than a byte properly written to packet header
2009-03-05 13:51:28 +00:00
zhitao
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
fros4943
f701615afa
bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
...
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels
9816f49fe6
Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy
2009-03-02 22:00:41 +00:00
adamdunkels
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
adamdunkels
45e32894a0
Bugfix: backwards definition of MIN macro (quite embarassing)
2009-03-02 11:22:09 +00:00
adamdunkels
aa2f7a3399
Made polite announcement times configurable, added missing right-brace
2009-03-01 10:43:57 +00:00
adamdunkels
3adf8e5807
Call output packet sniffers after the MAC has sent the packet
2009-03-01 10:29:50 +00:00
adamdunkels
2aedc8490d
Compile only if timesynch is enabled
2009-02-20 21:23:22 +00:00
fros4943
97f76126e6
remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)
2009-02-17 12:40:18 +00:00
adamdunkels
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9d75781a78
Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)
2009-02-10 23:51:12 +00:00
adamdunkels
b15198b9a8
Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already
2009-02-10 23:49:58 +00:00
adamdunkels
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
adamdunkels
6c95bd895a
Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.
2009-02-09 22:05:33 +00:00
adamdunkels
0de445e035
Initialize the announcement module
2009-02-09 21:08:12 +00:00
