Michael LeMay
c815fa4511
x86: Use shared ISR for I2C and GPIO
...
This patch permits interrupts to be generated by both the I2C and GPIO
controllers for simultaneously-executing applications. The controllers
share a single interrupt pin, INTC. Prior to this patch,
quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an
incorrect assumption that INTA is connected to the GPIO controller),
and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C
controller initialization is a prerequisite for GPIO initialization,
so the final configuration was that INTA and INTC were both routed to
PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if
the I2C controller was actually responsible for the interrupt.
This patch refactors the I2C and GPIO ISR setup and handler code so
that the shared portions are combined in
cpu/x86/drivers/legacy_pc/shared-isr.[ch]. The I2C and GPIO drivers
communicate their interrupt information to the shared component by
placing structures in a specific section of the binary.
2016-02-16 21:19:44 -08:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Simon Duquennoy
ebdc536d61
Merge pull request #1496 from simonduq/pr/jn516x-serial-input
...
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Simon Duquennoy
f87f7e7edd
jn516x enable serial input whenever there is no fallback interface
2016-02-03 17:53:29 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Nicolas Tsiftes
eef96f3ba7
Merge pull request #1480 from mdlemay/revise-clang-flags
...
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Simon Duquennoy
7c3108bf3b
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 13:36:18 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Michael LeMay
6557194fc5
galileo: Revise include flags for LLVM Clang
...
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
d4251d7c3b
Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
...
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou
9e9e6d07b0
Adjust READMEs to point explicitly to the arm-gcc version used by travis
2016-01-24 13:59:19 +00:00
Antonio Lignan
9a5682b75b
Merge pull request #1476 from alignan/pull/update-weather-meter
...
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
66ebca3ade
Updated to new adc-zoul renaming
2016-01-23 15:42:13 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Adam Dunkels
7128a6a178
Merge pull request #1258 from joakimeriksson/multiple-reassembly-fix
...
6LoWPAN - multiple reassembly fix and cleanup
2016-01-22 07:15:18 +01:00
Antonio Lignan
98ed8a29a0
Removed harsh restriction on mask values and disabled debug flags
2016-01-19 22:28:09 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
Antonio Lignan
0cb80b0605
Prevent calculations if tick is zero
2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
Joakim Eriksson
d4dc45e096
updated sicslowpan documentation and platform configurations
2016-01-19 15:27:14 +01:00
Antonio Lignan
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
Antonio Lignan
2bb7ac9cc0
Merge pull request #1451 from g-oikonomou/bugfix/sensortag/select
...
Rename select() in various sensortag sensor drivers
2016-01-17 00:08:37 +01:00
Antonio Lignan
99f0c9f19b
Merge pull request #1457 from alignan/pull/motion-sensor
...
Add support for digital motion/presence sensors
2016-01-11 20:30:09 +01:00
Antonio Lignan
57f4134c9e
Merge pull request #1454 from alignan/pull/sht25-sensor
...
Fixes and enhancements for the SHT25 sensor
2016-01-11 20:29:14 +01:00
Antonio Lignan
94657b7a72
Merge pull request #1449 from alignan/pull/bmp085-sensor
...
BMP085 barometric sensor for the RE-Mote platform
2016-01-11 20:28:35 +01:00
Antonio Lignan
c644a32dc7
Added support for digital presence/motion sensors
2016-01-11 18:36:31 +01:00
Antonio Lignan
fefb84596e
Fixed filter value preventing from initializing the ADC
2016-01-11 17:21:23 +01:00
