adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
nifi
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
adamdunkels
e34e97cd6f
Minor code style fixes
2009-02-24 21:30:20 +00:00
zhitao
ae271a7f2f
replaced the TMOTE_SKY macros with CONTIKI_TARGET_SKY, in conformance to the latest target hint rules
2008-11-25 09:20:54 +00:00
adamdunkels
ceb2554d2f
Enabled the SHT11 register readout to allow reading the low-voltage indicator bit
2008-11-10 21:10:36 +00:00
adamdunkels
a42311dc7e
Only process incoming data if the process is polled. Compile checksum checks only for IPv4.
2008-11-06 08:18:29 +00:00
joxe
673d73bfa3
added energest on all parts of leds API and some cleanup
2008-09-29 11:35:28 +00:00
adamdunkels
6a460fecdd
There is problem with the CC2420 driver: under high traffic load the packets often get mangled in the receive FIFO. Not sure why this happens or how to best prevent it. As a temporary workaround, I've added an additional CRC16 check to the incoming packets. This eats two bytes from each packet, but at least protects against the erroneous packets we've seen quite a few of lately. The reception code was also cleaned up, which resulted in a smaller code size.
2008-08-26 21:44:03 +00:00
adamdunkels
f58b387bd3
Code style fixes
2008-07-08 08:23:47 +00:00
adamdunkels
1f005b6299
Moved energest.{c,h} from core/lib to core/sys: power profiling is a system mechanism, not a library
2008-07-03 23:36:30 +00:00
adamdunkels
51f4ab8b2c
Changed type from off_t (that potentially conflicts with existing types.h typedefs) to unsigned long
2008-07-03 23:12:10 +00:00
adamdunkels
66876625d4
Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*.
2008-07-02 09:05:40 +00:00
adamdunkels
6b187328bd
Added AES cipher constants
2008-07-02 09:03:49 +00:00
nifi
1cef019e78
Fixed typo.
2008-07-02 09:02:39 +00:00
adamdunkels
1da58b8858
Functions for interfacing the built-in AES functions of the CC2420 chip
2008-07-02 08:46:13 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
c802151453
Removed unused files
2008-07-01 20:13:24 +00:00
adamdunkels
6709823d4a
Bugfix: energy estimation was not correct if a packet was sent when the radio was not in listen mode
2008-05-14 19:44:30 +00:00
adamdunkels
39abed8672
Moved old CC2420 driver to the backyard
2008-02-24 22:29:08 +00:00
adamdunkels
af48b648ee
Added a function that gets called when we see SLIP input. This function can be used to determine if a node is a SLIP gateway or not.
2008-02-24 21:00:53 +00:00
adamdunkels
b001c14bf2
Code style fix
2008-02-03 20:43:35 +00:00
adamdunkels
dc70ac2584
Added calibration to channel switch if currently in receive mode. Added explicit checks for transmission activity before channel switch
2008-01-24 13:09:16 +00:00
adamdunkels
2c5964ef55
Changed default transmission behaviour to be to send without checking for channel activity first (in anticipation of radio API change that adds a CCA function to the radio API). General code cleanup. Added optional timetable profiling. Added simple_cc2420_get_channel() function, changed simple_cc2420_set_chan_pan to simple_cc2420_set_pan since we now have a dedicated simple_cc2420_set_channel
2008-01-23 14:57:19 +00:00
fros4943
0c21c8893a
bugfix: wait while *either* transmitting or unvalid rssi
2008-01-17 15:38:45 +00:00
nvt-se
8a38ffea87
added declaration for simple_cc2420_get_txpower.
2008-01-15 08:53:52 +00:00
nvt-se
057cd5ac05
no ENERGEST_ON_* macro needed for levels.
2008-01-15 08:52:16 +00:00
nvt-se
c3653b96ce
check if ENERGEST_CONF_LEVELDEVICE_LEVELS is set.
...
call ENERGEST_ON_LEVEL.
2008-01-15 08:33:02 +00:00
thiemovoigt
21c690ecae
energy measurement support for TX power levels
2008-01-14 16:19:25 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
b356ebe009
Increased the default input line length from 40 to 80
2008-01-08 07:49:51 +00:00
adamdunkels
a0a524e128
Added watchdog_reboot() prototype
2008-01-07 14:42:35 +00:00
adamdunkels
cc6c6eee62
Added prototype for _on() and _off() functions
2008-01-07 14:41:34 +00:00
adamdunkels
d8e84abaae
Made estimation of departure time better by locally measuring the average time per byte and adding this to the incoming timestamp.
2008-01-07 14:08:02 +00:00
adamdunkels
c948c97b4f
Fixed timestamping to support the simple implicit network time synchronization mechanism
2007-12-16 14:30:36 +00:00
adamdunkels
d8617c7879
Added API for setting 802.15.4 channel and for measuring RSSI
2007-12-05 13:21:05 +00:00
ksb
71dc988cb9
slip.c:
...
char is signed but uip_buf is unsigned
spi.h:
casted unused values to void
autostart.c:
autostart.h:
The array itself should be const but the processes pointed to
should not.
profile-aggregates.c:
sizeof returns unsigned long on my platform
2007-11-18 12:27:44 +00:00
adamdunkels
e1affe5e72
Changed watchdog API by adding a start function, and renaming the restart function to periodic to make it clear that this should be called periodically
2007-11-17 10:15:50 +00:00
adamdunkels
5e7cbff22a
Fixed compiler warnings
2007-11-17 10:12:19 +00:00
adamdunkels
670f65b55e
Added battery sensor to the core interfaces
2007-11-13 20:36:40 +00:00
fros4943
2c1af74f37
declaration outside loop
2007-11-13 06:45:29 +00:00
adamdunkels
c5d79e8aea
Added contentiondrop rimestats when a packet couldn't be sent because of failing CCA check
2007-11-12 22:26:03 +00:00
adamdunkels
127503e2a6
waiting for valid RSSI bugfix, minor cleanup
2007-10-25 13:29:21 +00:00
adamdunkels
349274cb81
Turn off listen energy accounting when transmitting
2007-10-25 09:38:15 +00:00
adamdunkels
a9e4287cbe
Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets
2007-10-25 09:30:39 +00:00
nvt-se
045225fa05
Made driver less platform-dependent and added support for msb-430.
2007-10-22 12:19:58 +00:00
nifi
ccf6bc4d9d
moved ENERGEST_ON to actual transmission
2007-09-18 10:36:31 +00:00
nifi
c12af56ad0
Turn off ENERGEST_TYPE_TRANSMIT if send error
2007-09-18 10:32:00 +00:00
bg-
70ddc0f27e
* If we detect a RXFIFO overflow schedule a poll of the device driver.
2007-07-30 14:54:49 +00:00
bg-
8f0d9aab89
* Change max life of neigbour entries from 60 to 30 seconds by
...
changing the time unit (quanta) from 4 to 2 seconds.
2007-06-28 15:08:53 +00:00
bg-
08d547780c
* Some extra delay when broadcasting to break potential symmetries.
2007-06-01 14:37:02 +00:00
bg-
81b684414d
* Changed implementation for dealing with retransmissions to be
...
strictly event driven. The old implementation was rather process
like and the new one is still implemented as a process.
2007-05-31 10:15:57 +00:00
oliverschmidt
4aabfc10b3
Moved 6502 inline assmbler into backyard as it was never replaced by C code.
2007-05-26 22:00:12 +00:00
adamdunkels
f373c63532
Removed __ prefixes on symbols, which are reserved for C implementation; updated to new radio.h types
2007-05-25 08:06:15 +00:00
adamdunkels
c8eecc5b02
Updated types to avoid reliance on uIP includes
2007-05-25 08:05:24 +00:00
adamdunkels
b8d586b210
Enabled dropping of packets with bad CRC. Added statistics gathering. Bugfix when packets where shorter than 2 bytes
2007-05-22 20:51:30 +00:00
adamdunkels
0e4c30ccb4
Added net include to define u*_t types
2007-05-22 20:50:22 +00:00
adamdunkels
940f323801
Removed unused files
2007-05-22 17:35:28 +00:00
bg-
1009c3fabf
* Literal constants REMOTE_*.
2007-05-21 14:24:51 +00:00
fros4943
41255df6b0
removed old radio_on/off functions
2007-05-18 13:13:18 +00:00
adamdunkels
af997a93e0
Moved a much code as possible away from interrupt handler; main thread code now do not need to disable interrupts. Added energy estimation code. Added radio driver structure.
2007-05-15 07:53:09 +00:00
adamdunkels
177e07992d
A common structure for radio drivers. Used by MAC protocols.
2007-05-15 07:51:57 +00:00
bg-
81ad433208
* Change function uaodv_bad_route to uaodv_bad_dest.
2007-05-08 13:31:50 +00:00
bg-
b10eea85f5
* Add attribute to track bad routes and necessary support for this.
...
* Revamp forwarding to deal with bad routes or request new routes as
appropriate.
2007-05-08 08:36:00 +00:00
bg-
34b1d02607
* Need to track if this was the incoming interface.
2007-05-08 08:27:34 +00:00
bg-
536703d0a2
* Check in with debug off!
2007-05-07 12:02:14 +00:00
bg-
d34db6ee92
* Change retransmission scheme both for unicasts and for
...
broadcasts. Only count retransmissions that actually caused
transmission (according to the hardware).
2007-05-07 12:01:32 +00:00
bg-
cce656e23d
* Print LOST in dotted format.
2007-05-07 11:44:40 +00:00
bg-
83f2b1da00
* Use uip_fw return codes.
...
* Use unicast retransmission scheme also for broadcasts.
2007-05-02 14:51:20 +00:00
bg-
b97a9e1c28
* Sending routing messages should bypass same routing protocol.
...
* Unifdef UAODV_BAD_ROUTE.
* Less confusing debug printf.
2007-04-30 09:47:09 +00:00
bg-
f2ea90ba06
* Use literal constant.
...
* Better debug printf.
2007-04-30 09:42:16 +00:00
bg-
e7d7e31bc9
* Better management of "DATA ACK"s.
2007-04-30 09:41:42 +00:00
bg-
cd0d83a705
* Toggle led before returning.
...
* Change printf.
2007-04-24 18:38:11 +00:00
bg-
9c8f01be41
* Major overhaul in order to support route sequence numbers.
...
* Changes to use network byte order.
* Add RREQ forwading cache.
* Fix some const:ness and casts.
* RERR shall only delete old routes.
* Filter RREQ:s also using cc2420_check_remote().
* LRU management of routes.
2007-04-04 12:12:21 +00:00
bg-
212f455b71
* Literal constants.
2007-04-04 11:46:47 +00:00
bg-
478953dcf4
* Randomised backoff when broadcasting.
...
* Only warn about rxfifo overflows when sending.
* More intricate tests to verify if transmission really started.
2007-04-04 11:46:10 +00:00
adamdunkels
7ce8d3920a
Added radio_on() and radio_off() functions
2007-04-03 19:05:44 +00:00
adamdunkels
96d8967673
Should subtract two bytes from the length to account for the two-bytes footer
2007-03-25 17:15:30 +00:00
adamdunkels
cf24a46d2a
Exported RSSI values
2007-03-22 23:56:05 +00:00
adamdunkels
bc25633fd9
Removed blinking LEDs
2007-03-22 23:55:48 +00:00
adamdunkels
1ab044e319
Corrected sending of two bytes footer
2007-03-21 23:19:15 +00:00
adamdunkels
bba0485797
Experimental energy estimation code
2007-03-19 00:30:13 +00:00
adamdunkels
91fc3c3917
Renamed Rime output function
2007-03-15 22:11:06 +00:00
adamdunkels
ec9ea6d366
Button sensor header
2007-03-15 21:42:09 +00:00
adamdunkels
92a5b01bed
Radio sensor header file
2007-03-15 21:27:09 +00:00
adamdunkels
c29eb96219
A Rime driver for the simple-cc2420 driver
2007-03-15 21:26:18 +00:00
adamdunkels
638640113e
A very simple CC2420 driver that can only send and receive raw packets. No extra CC2420 functionality is enabled or used.
2007-03-15 21:26:00 +00:00
bg-
429d41defd
* General stuff for different baudrates:
...
- ubr argument to slip_arch_int
- macros for calculating ubr
- argument -Bbaudrate to tools tunslip and scat
2007-02-02 13:26:48 +00:00
bg-
7d5a6d6558
* Check for ip_id zero senders and low cost update of zero ip_id.
2007-02-01 14:04:06 +00:00
bg-
85fd100263
* PRINTF macro.
...
* Update printf on failed transmission.
2007-02-01 14:02:19 +00:00
bg-
95164eb39f
* Perform RXFIFO overflow check as late as possible when sending.
2007-02-01 14:00:27 +00:00
bg-
2a879202a2
* Initial AVR port.
...
* Check for RXFIFO overflow before sending.
* Fix in loop that waits for SFD start.
2007-01-24 16:26:55 +00:00
bg-
bea6aa5b3d
* Don't request MAC level ACKs for packets we "try" to forward before
...
we have a route.
2007-01-24 16:08:27 +00:00
bg-
a88f797455
* Constness and voidness.
2007-01-23 12:29:50 +00:00
bg-
f6936bfd51
* Comment.
2007-01-12 18:18:23 +00:00
bg-
29572668ac
* Typo in comment.
2006-12-20 13:42:55 +00:00
bg-
5d970109c8
* If broadcast transmission never starts, retry with (nearly)
...
exponential backoff.
* Fine-tune check for transmission start.
2006-12-01 15:04:04 +00:00
bg-
f3a6cee55b
* Oops, some machine dependent changes was accidentally committed.
2006-11-17 13:03:51 +00:00
bg-
27e531baad
* Set CC2420_RXCTRL1.RXBPF_LOCUR=1 as recommended in data sheet.
...
* Use PRINTF to disable debug printfs.
2006-11-17 12:27:23 +00:00