Commit graph

11964 commits

Author SHA1 Message Date
Benoît Thébaudeau b655d92aa4 cc2538: Provide SoC information
Add functions providing the SoC revision, SRAM size, and enabled
hardware features, as well as a function printing SoC information.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Benoît Thébaudeau b3ea790449 cc2538: sys-ctrl: Provide last reset cause
Add functions providing the last reset cause, one as an integer (ID),
and one as a string.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Simon Duquennoy 63565b109d Fix TSCH_AUTOSELECT_TIME_SOURCE to work with 2-byte addresses and with the new nbr_table_add_lladdr interface 2016-06-10 20:59:42 +02:00
Simon Duquennoy 809883e632 Making example tsch-rime more flexible 2016-06-10 20:59:40 +02:00
Simon Duquennoy 78f04fda83 Added example of TSCH used with Rime 2016-06-10 20:58:57 +02:00
Simon Duquennoy ac16fb9e2b TSCH fixes for the short-address case 2016-06-10 20:58:40 +02:00
Atis Elsts f0fcff2d1a TSCH: declare radio_rx_mode only when HW timestamps are enabled to avoid warnings 2016-06-10 15:04:07 +03:00
Atis Elsts 5b728691ad TSCH: add missing include 2016-06-10 15:04:07 +03:00
Atis Elsts fbb66f9cd5 TSCH: allow to configure channel scanning duration during the join phase 2016-06-10 15:04:07 +03:00
Atis Elsts b57009e564 TSCH: fix signedness in adaptive timesync 2016-06-10 15:04:07 +03:00
Atis Elsts 03d511c2be tsch-slot-operation.c: use ABS() instead of abs() for consistency with the rest of Contiki 2016-06-10 15:04:06 +03:00
Atis Elsts f6967c1f58 read RADIO_PARAM_LAST_RSSI and RADIO_PARAM_LAST_PACKET_TIMESTAMP only after the last packet has been read in TSCH: reading the packet might update these values 2016-06-10 15:04:06 +03:00
Atis Elsts 45510f57fa TSCH: add option to not to turn off radio during active TSCH timeslots 2016-06-10 15:04:06 +03:00
Atis Elsts 723c7e1117 print TSCH clock drift ppm whenever updated 2016-06-10 15:04:06 +03:00
Atis Elsts b3afd65b1d fix a few comments in TSCH 2016-06-10 15:04:06 +03:00
Atis Elsts 0cb222e6e1 add 2-channel TSCH hopping sequence 2016-06-10 15:04:06 +03:00
xukai bd0716b044 Merge remote-tracking branch 'contiki-os/master' 2016-06-10 12:54:59 +08:00
Nicolas Tsiftes 8e6c6cc45b Merge pull request #1687 from tsparber/fix-rpl-ex-header-len-unit
rpl-ext-header: Use 8-octet unit for HBHO length
2016-06-09 16:28:27 +02:00
Antonio Lignan 092f0e62fe Added generic relay driver for the zoul-based platforms 2016-06-09 15:53:25 +02:00
Tommy Sparber 27cceda1e8
rpl-ext-header: Use 8-octet unit for HBHO length
According to RFC 2460 the length field of the Hop-by-Hop options header
should use a 8-octet unit (multiple of 8 byte).

In a normal configuration the RPL_HOP_BY_HOP_LEN define is 8, so the
current implementation works, but if RPL_HOP_BY_HOP_LEN is a multiple
of 8 the length is not calculated correctly.
2016-06-08 17:37:59 +02:00
Nicolas Tsiftes 10cd17b626 Merge pull request #1508 from simonduq/pr/rpl-non-storing
RPL non storing mode
2016-06-08 16:26:05 +02:00
Simon Duquennoy 535ff25da2 RPL non-storing defensive link update: make sure the topology is loop-free at all times 2016-06-08 14:14:03 +02:00
Simon Duquennoy 819916668e Incorporate latest changes on rpl tests to 23-rpl-non-storing 2016-06-08 14:09:43 +02:00
Simon Duquennoy d5e74b9579 Code style 2016-06-08 14:05:37 +02:00
Simon Duquennoy 0f5e3413fa Simplify dao_input 2016-06-08 14:04:47 +02:00
Simon Duquennoy 6c4d5312ae uip-icmp6.c: call rpl_insert_header only when UIP_CONF_IPV6_RPL is set 2016-06-08 14:03:28 +02:00
Simon Duquennoy 4208973017 Fix DAO-ACK support for non-storing 2016-06-08 14:03:27 +02:00
Simon Duquennoy 6cdec70798 rpl_verify_header: do not select DAG in storing mode after updating neighbor rank, as this may result in a No-Path DAO being sent, which will drop the current packet. 2016-06-08 14:03:26 +02:00
Simon Duquennoy 343c274359 RPL: re-enable RPL_DIO_REFRESH_DAO_ROUTES by default as it is needed with DAO-ACK disabled. Now increments the DTSN only at the root 2016-06-08 14:03:25 +02:00
Simon Duquennoy c3ea1f9fc6 Orchestra: added support for RPL non-storing mode 2016-06-08 14:03:24 +02:00
Simon Duquennoy ded71a7400 RPL: add neighbor to cache on incoming DIO also at the root 2016-06-08 14:03:23 +02:00
Simon Duquennoy b32b3f6666 RPL non-storing: add compile-test to also check for warnings 2016-06-08 14:03:22 +02:00
Simon Duquennoy 1a7133bbf2 Simplified configuration of RPL non-storing mode 2016-06-08 14:03:21 +02:00
Simon Duquennoy f26ea34c61 Run RPL regression tests in non-storing mode 2016-06-08 14:03:19 +02:00
Simon Duquennoy 2fe2a28439 Make some of the rpl examples configurable in non-storing mode 2016-06-08 14:03:10 +02:00
Yasuyuki Tanaka eef233ceab Clear the uIP buffer before calling dao_ack_output() 2016-06-08 14:02:52 +02:00
Yasuyuki Tanaka bb69e35c76 Fix typos causing compilation errors in rpl_srh_get_next_hop() 2016-06-08 14:02:51 +02:00
Yasuyuki Tanaka f53bae6225 Remove a debug message showing "SRH Next Hop" in insert_srh_header() 2016-06-08 14:02:50 +02:00
Yasuyuki Tanaka 2abf27a6f7 Remove an unnecessary NULL-check in insert_srh_header() 2016-06-08 14:02:49 +02:00
Yasuyuki Tanaka 97a362acdc Use a stricter check in rpl_srh_get_next_hop() 2016-06-08 14:02:48 +02:00
Yasuyuki Tanaka 0be30628ce Enable the root to send back a DAO-ACK 2016-06-08 14:02:47 +02:00
Simon Duquennoy ed11320dc3 Platform cooja: provision 300 links for RPL non-storing mode 2016-06-08 14:02:46 +02:00
Simon Duquennoy b3e31e1456 Implement RPL non-storing mode 2016-06-08 14:02:45 +02:00
Simon Duquennoy d14b76d869 RPL: logging fixes 2016-06-08 14:02:44 +02:00
xukai a1ea6d311f Fix i2c bug in sensortag flatform. 2016-06-08 15:09:00 +08:00
Khaled Qorany 37360aae51 Implementation of the ESMRF engine 2016-06-07 23:08:40 +02:00
Simon Duquennoy 4499d80348 Merge pull request #1180 from bkozak-scanimetrics/uip6_put_temporary_on_stack
Put some uip6 temporaries on the stack
2016-06-07 22:51:55 +02:00
Billy Kozak 72b4d38ab3 Put some uip6 temporaries on the stack
Some "temporary" variables were declared with static storage duration
for no good reason.

Replaced them with local stack variables wherever they were used.

There are still some variables that are unecesarily given static
duration which I have left alone.
2016-06-07 09:59:46 -06:00
Billy Kozak ac6a1c5255 Fixed wrong first cycle_start
The first time that powercycle() runs, cycle_start is incremented
by CHECK_TIME twice which causes the second cycle to be late.

This commit fixes this.
2016-06-07 08:13:18 -06:00
Antonio Lignan ee0b02c819 Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00