Robert Olsson
23a481600a
BME280 fixes, codestyle, return code for bme280_init added, Unneeded header files removed
2016-11-30 12:04:57 +01:00
Robert Olsson
1c0e33be79
Update README.bme280
2016-11-30 12:04:57 +01:00
Robert Olsson
dcbb5f6271
BME280 I2C integration fixes
2016-11-30 12:04:57 +01:00
Robert Olsson
cfabf0e6a2
Support for BME280 added.
...
new file: dev/bme280/README.bme280
new file: dev/bme280/bme280-sensor.c
new file: dev/bme280/bme280-sensor.h
new file: dev/bme280/bme280.c
new file: dev/bme280/bme280.h
2016-11-30 12:04:57 +01:00
Simon Duquennoy
ba739f679e
cc1200: configurable tx-rx turaround time
2016-09-23 09:41:20 +02:00
Simon Duquennoy
5dd3d03699
cc1200: call watchdog_periodic while in busy-wait
2016-09-23 09:10:42 +02:00
Simon Duquennoy
086499a864
cc1200: added configuration for 868 MHz 2-FSK at 1.2 kbps
2016-09-23 09:06:14 +02:00
Simon Duquennoy
622d576439
cc1200: configure RSSI offset as part of cc1200_rf_cfg
2016-09-23 09:06:13 +02:00
Simon Duquennoy
97843ed322
cc1200: use Hz instead of kHz for channel spacing
2016-09-23 09:06:05 +02:00
Sumankumar Panchal
25dea7264a
CC2520: Added offset to calculate correct RSSI value
2016-08-24 10:21:14 +05:30
George Oikonomou
a52d50f332
Remove built-in sniffer support: CC1200
2016-08-12 01:23:49 +01:00
Antonio Lignan
7503628077
Merge pull request #1673 from njh/enc28j60_init_const
...
Changed read-only pointers to const in enc28j60
2016-06-03 19:46:31 +02:00
Nicholas Humfrey
65ff03537b
Changed read-only pointers to const in enc28j60
2016-05-23 12:54:16 +01:00
Antonio Lignan
a70b9bc277
Merge pull request #1447 from alignan/pull/cc1200-sensniff
...
Added sensniff support for the CC1200
2016-04-27 23:59:45 +02:00
Antonio Lignan
c924567d86
Fix ip64 warnings
2016-02-04 00:26:54 +01:00
Antonio Lignan
8456b8333f
Added sensniff support for the CC1200
2016-01-08 14:45:50 +01:00
Benoît Thébaudeau
a2cae3359b
Merge pull request #1168 from bthebaudeau/enc28j60-fixes-and-improvements
...
enc28j60: Fixes and improvements
2015-12-15 00:14:02 +01:00
Simon Duquennoy
1e0adbbf24
New radio interface parameters: Rx poll mode, last packet timestamp, last packet rssi, last packet lqi. Implementation of these parameters for cc2420, with, in addition, runtime configuration of CCA before Tx, auto-ack and frame filtering
2015-12-04 15:21:51 +01:00
Ulf Knoblich
5d1045d002
cc1200: Make it more suitable for contikimac + bugfix in rx_rx()
2015-11-26 09:42:19 +01:00
Simon Duquennoy
fbd78a7e3b
Merge pull request #1293 from simonduq/pr/fix-warnings
...
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
Antonio Lignan
50ee33630e
Made CC1200 test mode and rx watchdog selectable
2015-10-20 11:20:19 +02:00
Simon Duquennoy
ca8fe618e7
cc2420 and cc2430: add comment on why we discard tbiv
2015-10-20 10:11:49 +02:00
Simon Duquennoy
b7fb06052f
cc2530: do not declare sfd_timestamp if not used
2015-10-20 09:37:22 +02:00
Simon Duquennoy
cf97cfaff8
cc2530: removed warning on unused variable
2015-10-20 09:37:21 +02:00
Simon Duquennoy
e5d5cf7018
cc2420: do not declare sfd_timestamp if not used
2015-10-20 09:37:14 +02:00
Simon Duquennoy
6594cd1bba
cc2420: fix function prototype of set_key
2015-10-20 09:37:13 +02:00
Simon Duquennoy
cb4003eb52
Removed compiler warning from sht11.c
2015-10-20 09:37:12 +02:00
Nicolas Tsiftes
2ec3b1e973
Merge pull request #1185 from sumanpanchal/cc2520
...
Fixed the issue with CC2520_READ_REG macro to read correct value of register.
2015-09-10 14:37:00 +02:00
Sumankumar Panchal
27dd3f493b
Solved issue with CC2520_READ_REG macro to read correct value of register.
2015-09-08 19:39:23 +05:30
Ulf Knoblich
bfcea70831
Removed NULLRDC specific stuff from rf configuration as it is not the correct place to define it
2015-08-20 16:00:18 +02:00
Benoît Thébaudeau
6b76ead49c
enc28j60: Prevent enc28j60_read() from running before init
...
This is a precaution in case enc28j60-ip64-driver.c is skipped.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:16 +02:00
Benoît Thébaudeau
b4c32954a6
enc28j60: Fix workaround for erratum #14
...
Only odd addresses may be programmed to the ERXRDPT registers, so
initialize them to RX_BUF_END instead of RX_BUF_START.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:15 +02:00
Benoît Thébaudeau
8615b77da0
enc28j60: Print the status vector in case of transmit error
...
This makes debugging easier.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:15 +02:00
Benoît Thébaudeau
8c6e3e348a
enc28j60: Program ETXND after the data packet
...
Just follow the steps from the data sheet to transmit a packet.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:15 +02:00
Benoît Thébaudeau
15d1b177d6
enc28j60: Use hardware padding for transmissions
...
There is no reason to use software when a feature is available in
hardware.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:15 +02:00
Benoît Thébaudeau
2cd3eaf310
enc28j60: Implement and use the BFS and BFC commands
...
The Bit Field Set and Bit Field Clear commands are more efficient than
the Read Control Register + Write Control Register combination, so use
them whenever possible, i.e. for the ETH registers.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:15 +02:00
Benoît Thébaudeau
356d17737c
enc28j60: ERXFCON needs to be set only once
...
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
8a20e7c05c
enc28j60: Fix the MAC address configuration comment
...
The MAADRx register numbering was wrong.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
31e0c87a6f
enc28j60: Do not initialize MAIPGH for full duplex
...
MAIPGH should be programmed only if half duplex is used.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
121b066f04
enc28j60: Update the MACON4 configuration comment
...
This only applies to half duplex, so the actual configuration of MACON4
does not need to be changed.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
2b08c32528
enc28j60: The MACON2 register is reserved
...
The register 0x01 in bank 2, named MACON2 in the code, is actually
reserved, so its contents must not be changed.
This register has been marked as reserved from the revision B of the
data sheet in July 2006. The current revision of the data sheet is E,
and it is quite clear about this register.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
b21da96e67
enc28j60: Print revision during initialization
...
This is useful as debug information since the revisions of this device
have notable differences.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:14 +02:00
Benoît Thébaudeau
ba6a0bc381
enc28j60: Add workaround for erratum #2 "CLKRDY set early"
...
A delay of 1 ms must be added after the System Reset Command. Still wait
for ESTAT.CLKRDY afterwards as a precaution.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Benoît Thébaudeau
48f269e4f5
enc28j60: Fix RCR command for MAC and MII registers
...
The Read Control Register command requires that a dummy byte be read
before the register value for the MAC and MII registers.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Benoît Thébaudeau
35544e81ee
enc28j60: Reuse read/writedata() for read/writedatabyte()
...
The read/writedatabyte() functions are just a special case of
read/writedata() with a simpler API, so reuse these instead of
duplicating code.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-07-16 21:14:13 +02:00
Ulf Knoblich
557091b710
cc1200: added nullrdc timing parameters to rf configuration file
2015-06-22 14:59:14 +02:00
Ulf Knoblich
584b6ae4ca
cc1200: removed the hardware dependent sniffer stuff from cc1200
2015-05-29 15:19:16 +02:00
Ulf Knoblich
ed0460e369
cc1200: Initial commit (tested with 50kps nullrdc) + update rf configuration
2015-05-28 15:08:01 +02:00
Simon Duquennoy
333e076b24
Disable PACKETBUF_ATTR_PACKET_TYPE in the non-Rime case by default
2015-05-06 16:36:15 +02:00
Adam Dunkels
12beebeec0
IP64 bindings for the ENC28j60 Ethernet driver
2015-04-15 08:30:26 +02:00