Removed NULLRDC specific stuff from rf configuration as it is not the correct place to define it

ico
Ulf Knoblich 2015-08-20 16:00:18 +02:00
parent 557091b710
commit bfcea70831
1 changed files with 0 additions and 30 deletions

View File

@ -57,36 +57,6 @@
#define RF_CFG_MAX_TXPOWER CC1200_CONST_TX_POWER_MAX
/* The carrier sense level used for CCA in dBm */
#define RF_CFG_CCA_THRESHOLD (-91)
/*
* ACK_WAIT_TIME is the time between sending a packet and detecting
* an arbitrary incoming packet (hopefully an ACK).
* An incoming packet is detected using either
* - receiving_packet()
* - pending_packet()
* - channel_clear()
* Let's assume we use receiving_packet() as the latest (reliable)
* indication for an incoming packet. It returns 1 as soon as the sync word
* is detected. We can then estimate this time (assuming an 802.15.4-2011 frame)
* by:
* - 1ms RX/TX turnarround (also FIFO read-out -> depends on packet length!)
* + length of preamble (4 bytes)
* + length of sync word (2 bytes)
* -> let's use 2.5 ms for 50kbps
*/
#define NULLRDC_CONF_ACK_WAIT_TIME RTIMER_SECOND/400
/*
* NULLRDC_AFTER_ACK_DETECTED_WAIT_TIME is the time after an incoming
* paket is detected (using the means described above) and the ACK is
* available for read-out by the MAC layer (pending_packet(), read()).
* If we assume that channel_clear() indicated the incoming packet, the maximum
* time it takes for the ACK to be available calulates as following:
* - length of preamble (4 bytes)
* + length of ACK (3 bytes)
* + length of CRC (2 bytes)
* - 1ms safety margin
* -> let's use 2.5 ms for 50kbps
*/
#define NULLRDC_CONF_AFTER_ACK_DETECTED_WAIT_TIME RTIMER_SECOND/400
/*---------------------------------------------------------------------------*/
static const char rf_cfg_descriptor[] = "802.15.4g 863-870MHz MR-FSK mode #1";
/*---------------------------------------------------------------------------*/