Commit graph

1072 commits

Author SHA1 Message Date
Harald Pichler 2b8aeee115 save energy 2014-12-29 13:05:50 +01:00
Harald Pichler 365fe31b02 coap 18 2014-12-29 08:16:47 +01:00
Harald Pichler aaaa0aa138 cleanup code, batterie value Volt 2014-12-29 08:11:51 +01:00
Harald Pichler a8c87e3f54 read better values 2014-12-29 08:10:10 +01:00
Harald Pichler df95393980 remove init pwm per default, switch moisture sensor on and off to save energy 2014-12-12 08:47:01 +01:00
Harald Pichler 76ea945fd7 add power save mode RDC_CONF_PT_YIELD_OFF 2014-12-09 16:42:45 +01:00
Harald Pichler 248a1e3882 add leds and battery 2014-12-09 14:36:06 +01:00
Harald Pichler cc0539ee90 remove unused examples 2014-12-07 21:55:43 +01:00
Harald Pichler fed6fe019c change to coap18 2014-12-07 21:39:46 +01:00
Harald Pichler 13aa2a1415 add coap18 2014-12-07 21:32:03 +01:00
Harald Pichler d6144bfebe cleanup makefile, add avr-size 2014-12-07 20:10:53 +01:00
Harald Pichler ed161d1905 NETSTACK_CONF_WITH_IPV6 2014-12-07 17:36:53 +01:00
Harald Pichler a02be51f08 Merge branch 'contiki' into osd 2014-12-07 15:24:00 +01:00
Simon Duquennoy c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy 74f6ae3751 slip-radio: remove unneeded definition of NETSTACK_CONF_WITH_RPL (now set from makefile with CONTIKI_WITH_RPL) 2014-12-01 21:04:25 +01:00
Simon Duquennoy a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy 722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes bb645b6287 Merge pull request #877 from gebart/for-upstream/rpl-border-router-webserver-tcp
examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
2014-11-28 19:00:46 +01:00
Nicolas Tsiftes 4a41f147d3 Merge pull request #879 from alignan/fix_rssi_app
Fixed rssi scanner application and moved into single example
2014-11-28 19:00:23 +01:00
Harald Pichler 9c90608d3c bugfix hum temp 2014-11-28 14:04:39 +01:00
Antonio Lignan 4f744d858a Fixed rssi scanner application and moved into single example 2014-11-28 13:07:26 +01:00
Harald Pichler 730d9e2d11 add battery 2014-11-27 15:01:07 +01:00
Harald Pichler 1dacefce01 add coap18 2014-11-27 14:07:14 +01:00
Harald Pichler 41f8a9c661 add coap18 2014-11-27 09:30:36 +01:00
Harald Pichler 698d8dce90 add coap18 2014-11-26 21:47:00 +01:00
Joakim Gebart 1e03cdd553 examples/ipv6/rpl-border-router: Add -DUIP_CONF_TCP=1 to CFLAGS
The example used to rely on the default value being set to 1 which
caused build failures on platforms which have a default UIP_CONF_TCP=0

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:05:32 +01:00
Joakim Gebart 64a4755354 examples/webserver-ipv6: Add UIP_CONF_TCP=1 to DEFINES.
TCP is mandatory for this HTTP server.

Fixes builds for platforms which have TCP turned off by default (mulle)

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-11-26 19:03:51 +01:00
Harald Pichler 824eca3b61 cleanup code, move ds1820 to resources 2014-11-26 17:12:34 +01:00
Harald Pichler 7a666307cf add coap 18 2014-11-26 16:46:13 +01:00
Harald Pichler 9eb0c5466f initial uplaod 2014-11-21 09:44:25 +01:00
Harald Pichler 6167835689 use contiki mac 2014-11-20 16:32:22 +01:00
Harald Pichler e58322260f update llayer 2014-11-20 13:43:53 +01:00
Harald Pichler d8e0dd7005 update to coap rfc 2014-11-19 22:06:38 +01:00
Harald Pichler 8966f7d509 update project to coap 13 2014-11-19 13:59:05 +01:00
Harald Pichler 0620eb86d0 initial upload 2014-11-19 13:58:56 +01:00
Harald Pichler 0c7328b59d initial upload 2014-11-19 13:58:50 +01:00
Harald Pichler dfaa8c0f32 initial upload 2014-11-19 13:58:32 +01:00
Harald Pichler 914f5b931b initial upload 2014-11-19 13:58:24 +01:00
Harald Pichler 1b40bccb00 initial upload 2014-11-19 13:58:02 +01:00
powermik 8bb7d82a2d UNSUPPORTED_MADIA_TYPE is a typo 2014-11-19 13:55:59 +01:00
Harald Pichler 21bbe79079 use Arduino like optotriac driver 2014-11-19 13:54:53 +01:00
Harald Pichler 026b961d5e simplify code, bugfixes PE3 2014-11-19 13:54:42 +01:00
Ralf Schlatterbeck 53cf5ab6cf Fix A0-A5 ADC constants, use in example sketch 2014-11-19 13:53:59 +01:00
Ralf Schlatterbeck fbe6ae6a60 Fix off-by-one error in digitalPinToTimer 2014-11-19 13:53:53 +01:00
Ralf Schlatterbeck ddbfd6712c Remove obsolet macro in example 2014-11-19 13:53:44 +01:00
Ralf Schlatterbeck abdf6f8c6b Refactor A/D conversion in adc.c
Now the necessary settings are in adc.h. Refactored to allow repeated
ADC reads without reinitialization. Arduino allows setting
analogReference, this is now also implemented.
ADC is now initialized to sane values in apps/arduino/arduino-process.c
dev/arduino/arduino-compat.h now has all hardware independent settings
for arduino (some moved from platform/osd-merkur/dev/hw-arduino.h).
turnOffPWM re-implemented with hw_timer, removed from wiring_digital.c
ADC-specific arduino stuff moved to arduino-compat.h
Arduinos wiring_analog no longer necessary.
arduino-sketch example now reads analog inputs 1 and 5 using analogRead.
2014-11-19 13:53:32 +01:00
Ralf Schlatterbeck d5284eebe1 Factor resources, fix time
Now there is a generic resource that can generate and parse
application/json as well as text/plain. It can be re-used, only the
from_string and to_string routines have to be written and the resource
properly set up. A new resource format is specified, see
GENERIC_RESOURCE in, e.g., examples/osd/pwm-example. This is now used in
all my examples, namely pwm-example, arduino-sketch, wallclock-time.

There was an off by one error for the month in time formatting (in
gmtime and localtime). And the leap-year computation was broken. Both
fixed now, so we get a correct date. For localtime we are still 2 hours
off because daylight saving isn't implemented yet.

Also renamed gmtime to utc.
2014-11-19 13:53:12 +01:00
Ralf Schlatterbeck c46d6afa39 Make Arduino timer stuff work on Contiki
New discovery: Contiki also uses timer 0. With almost the same interface
as Arduino. So we now completely get rid of wiring.c (only the main
file, the other wiring_xxx stay) and implement Arduino timer, delay, etc
in terms of the corresponding Contiki routines. Verified that now delay
works as expected. The LED in examples/osd/arduino-sketch blinks!

Before this, the arduino_init routine in wiring.c destroyed the timer-0
initialization of contiki, making both, contiki timer implementation
*and* contiki timer implementation fail if the arduino_init routine was
called. Now both work.

Squashed with following bug-fix commit.
2014-11-19 13:50:58 +01:00
Ralf Schlatterbeck b6be226e69 Add Arduino compatibility layer
We can now directly compile arduino sketches (.pde) files.
Arduino compatible analogWrite works now.
But there is still a long way to go, serial I/O and timer stuff (delay,
millis etc) currently don't work (not tested but I don't expect this to
work).
It can be used in an arduino sketch or in a normal contiki program.
We get a PWM frequency of 490.2 Hz (a period of 2.040 ms), that's
Arduino compatible. If you need different frequencies see native timer
usage in examples/osd/pwm-example
In a contiki program you have to call arduino_pwm_timer_init to
initialize the timer before pwm works. The arduino sketch wrapper
already does this.
For running a sketch, see examples/osd/arduino-sketch
2014-11-19 13:48:05 +01:00
Ralf Schlatterbeck cfec3c6e2d Initial implementation of avr hardware timer
Mainly for PWM use for now.
With example to set the LED to different brightness via COAP.
We switch the LED with 50 kHz (20µs) in this example.
2014-11-19 13:47:37 +01:00