deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
8958 commits 6 branches 13 tags 80 MiB
Commit graph

8958 commits

This branch
This branch
All branches
Author SHA1 Message Date
George Oikonomou acebfa2932 Merge pull request #466 from ADVANSEE/cc2538dk-slip-enable 
cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED
 2013-12-05 09:11:38 -08:00
Nicolas Tsiftes 75cbf4f48a Merge pull request #479 from adamdunkels/push/cleanup-xmac-and-lpp 
Remove xmac.c and lpp.c
 2013-12-04 04:57:27 -08:00
Adam Dunkels d85cb0604d Merge pull request #484 from adamdunkels/push/travis-fix 
Partial fix for travis
 2013-12-04 00:06:17 -08:00
Oliver Schmidt 9a48bcf941 Merge pull request #488 from oliverschmidt/master 
Avoid access to the address register during auto-increment.
 2013-12-03 12:59:45 -08:00
Oliver Schmidt 9cdc6da040 Avoid access to the address register during auto-increment. 
It cannot be ruled out that access to the address register triggers
an address auto-increment. Therefore a temporary address register
shadow is introduced to replace the access to the address regsiter.

Additionally there are several minor beautifications.
 2013-12-03 21:31:43 +01:00
Adam Dunkels eda816e789 Merge pull request #42 from g-oikonomou/remove-sensinode-tests 
Remove Sensinode tests from travis
 2013-12-03 10:42:20 -08:00
George Oikonomou d8d15fec67 Remove Sensinode tests from travis 2013-12-03 14:13:40 +00:00
Adam Dunkels b01469907b Don't compile webserver-ipv6 for the sky platform, as it is a little too small. Use the larger exp5438 instead 2013-12-02 23:09:25 +01:00
Mariano Alvira 54719b75b8 Merge pull request #140 from cetic/slip-radio-platforms 
Extend slip-radio example for Econotag and Nooliberry
 2013-12-02 09:23:10 -08:00
Mariano Alvira ab8fb6c396 Merge pull request #386 from chrta/stm32w_flasher_udev 
In stm32w_flasher replaced hal-* calls with usage of pyudev.
 2013-12-02 09:21:39 -08:00
Mariano Alvira 590b3f48a9 Merge pull request #477 from MariaLauraStefanizzi/eeprom 
i2c and eeprom drivers for mbxxx boards
 2013-12-02 09:20:14 -08:00
Mariano Alvira 86c593b7cd Merge pull request #481 from ismb-pert/fix-sleep 
Fix sleep
 2013-12-02 09:19:25 -08:00
Mariano Alvira 70215b634d Merge pull request #480 from hexluthor/upstream 
Add a rule for generating assembly listings on mc1322x targets, for example: "make webserver6.lst".
 2013-12-02 09:18:34 -08:00
Mariano Alvira 2ab24f4fc3 Merge pull request #387 from chrta/mb950_1_rev_B 
Added support for STM32w boards MB950 and MB951 revision B.
 2013-12-02 09:11:50 -08:00
Gianfranco Costamagna ae27278714 Readded clock.c file, deleted in pull request #266, fixing issue #440 2013-12-02 11:38:07 +01:00
Gianfranco Costamagna 19a46266a5 Revert "Fixing sleep on stm32w108 cpu" 
This reverts commit eac73ff68ce98e862def4bd671db03f7b9a3b438.
 2013-12-02 11:37:53 +01:00
Ian Martin 0dafba4f6d Add a rule for generating assembly listings on mc1322x targets, for example: "make webserver6.lst". 2013-12-01 16:22:37 -05:00
Mariano Alvira 5fbefbd87b Merge pull request #459 from adamdunkels/push/mc1322x-stuff 
MC1322x additions
 2013-11-29 11:59:04 -08:00
Nicolas Tsiftes 7b1e3d1c94 Merge pull request #460 from adamdunkels/push/routelist 
IPv6 routes LRU
 2013-11-29 05:23:05 -08:00
Nicolas Tsiftes 65392ce59e Merge pull request #474 from adamdunkels/push/cleanup-vnc 
Remove the VNC client and server
 2013-11-29 05:07:53 -08:00
Christian Taedcke 0de2e6dded In stm32w_flasher adapted error message for missing pyudev. 2013-11-28 16:49:43 +01:00
Adam Dunkels 0908924f91 Removed the lpp.c code 2013-11-28 15:24:40 +01:00
Adam Dunkels f86aaf7c14 Removed the xmac.c code 2013-11-28 15:24:22 +01:00
Adam Dunkels d1d352b2f4 Merge pull request #473 from adamdunkels/push/cleanup-checkpoint 
Removing the experimental checkpoint functionality
 2013-11-28 06:05:43 -08:00
Adam Dunkels 611c659e51 Removed the VNC/CTK server and the VNC viewer app 2013-11-28 14:10:47 +01:00
Adam Dunkels 88915dca58 Enabled shell_rime_send_cmd_init() so that this example can be used in the shell/03-sky-shell-command regression test 2013-11-28 14:09:17 +01:00
Adam Dunkels 0fd503af42 Removed the experimental checkpointing code 2013-11-28 14:09:17 +01:00
Fredrik Österlind 189b1535e9 Merge pull request #475 from cetic/cooja-radiologger-pcap 
Allow user configuration of RadioLogger pcap file
 2013-11-28 04:54:07 -08:00
Maria Laura Stefanizzi 8de0380efe Eeprom-test example modified 
This patch improves the eeprom-test example adding more
tests on the eeprom read/write procedures.
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi 10c7066035 mbxxx eeprom driver 
This patch adds the eeprom driver needed to access M24C64
eeprom which is on some mbxxx boards.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi 22f39ab4ff MEMS I2C integration. 
This patch allows the MEMS driver to use the i2c driver.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi a9c0768fd6 Integrate I2C driver into board initializzation 
This patch add I2C initializzation for board with I2C devices.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Maria Laura Stefanizzi c7b1248aac mbxxx I2C driver. 
This patch add the I2C driver for mbxxx platform to communicate with
devices connected to the SC2 I2C bus.
Signed-off-by: Maria Laura Stefanizzi <laura28582@gmail.com>
 2013-11-27 15:40:07 +01:00
Laurent Deru 957be0a9be Allow user configuration of RadioLogger pcap file 2013-11-27 14:05:45 +01:00
Laurent Deru fa2dd5baec Allow configuration of pcap output file 2013-11-27 14:05:45 +01:00
Fredrik Österlind c99a76747c Merge pull request #469 from eberlin/cooja-tab-char 
Fix: preserving blank characters (tabulator and space) in Cooja serial output
 2013-11-27 00:45:39 -08:00
Adam Dunkels 0d04db2b03 Merge pull request #428 from g-oikonomou/config-sanity 
Remove unnecessary stuff from various Makefiles (Config Sanity, Pt 1)
 2013-11-26 15:05:08 -08:00
Nicolas Tsiftes db4cada4e7 Merge pull request #462 from adamdunkels/push/no-reserved-double-inclusion-defines 
Remove all leading double underscore inclusion #defines
 2013-11-26 14:26:37 -08:00
Eugen Berlin a415c2bb1b Fix: preserving blank characters (tabulator and space) in Cooja serial output 2013-11-26 16:43:31 +01:00
Fredrik Österlind ec5039b9eb Merge pull request #465 from cetic/cooja-pcap 
Cooja Pcap export: Reverts PR #284 to fix #420
 2013-11-25 23:53:26 -08:00
Benoît Thébaudeau 436b585d7e cc2538dk: Make it possible to override SLIP_ARCH_CONF_ENABLED 
As the comment in contiki-conf.h says, the automatic definition of
SLIP_ARCH_CONF_ENABLED works only if UIP_FALLBACK_INTERFACE is tied to SLIP. If
UIP_FALLBACK_INTERFACE is set to another interface, SLIP_ARCH_CONF_ENABLED is
still automatically set to 1, leading to unwanted SLIP_END characters from
dbg.c:putchar() being printed on the UART.

This change makes it possible to force the definition of SLIP_ARCH_CONF_ENABLED
(e.g. from project-conf.h), so that it can be disabled if UIP_FALLBACK_INTERFACE
is used with something else than SLIP.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 20:48:52 +01:00
Sébastien Dawans 700994ec1c Cooja Pcap export: Reverts PR #284 to fix #420 2013-11-25 16:36:49 +01:00
Adam Dunkels b133e387bd Merge pull request #414 from ADVANSEE/duplicate-packets 
mac: Fix false duplicate packets detections
 2013-11-25 07:16:58 -08:00
Benoît Thébaudeau 4deba89f81 rdc: duplicate packets: Keep only the last sequence number for each address 
According to IEEE 802.15.4e (§6.4.3.9), in order to detect duplicate received
MAC-layer frames, only the most recently received frame's sequence number needs
to be stored for each unique device address. Doing so limits the possible false
duplicate packet detections to a single sequence number. This also allows to
keep the last sequence number of more device addresses for the same value of
MAX_SEQNOS.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 13:01:11 +01:00
Benoît Thébaudeau 477a4a7178 rdc: duplicate packets: Factor out detection code 
The code detecting duplicate packets in the RDC layer had been copied into most
RDC implementations. Factor it out into a new mac-sequence module in order to
have a single instance of this code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 13:01:11 +01:00
Benoît Thébaudeau 14db3382af csma: Initialize sequence number with random value 
According to IEEE 802.15.4 (§5.1.6.1, §6.4.2), the MAC sequence numbers should
be initialized to random values. This was already the case in
framer-802154.c:create(), but not in csma.c:send_packet(), sometimes causing
false detections of duplicate MAC-layer packets in other devices when a device
was restarted too quickly. This patch decreases the probability of such an
event.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2013-11-25 13:01:11 +01:00
Nicolas Tsiftes acee82abbb Merge pull request #456 from adamdunkels/push/6lowpan-changes 
6lowpan changes
 2013-11-24 15:37:12 -08:00
Adam Dunkels bb2dcaa057 A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix 2013-11-24 20:20:11 +01:00
Nicolas Tsiftes 7283e48f09 Merge pull request #454 from adamdunkels/push/dao-updates-rebased 
RPL feather mode
 2013-11-24 07:49:49 -08:00
Adam Dunkels d05a9e2e39 Disabling the fragmentation test for the sky, as it is a little too small to reliably run this firmware 2013-11-24 16:24:13 +01:00