George Oikonomou
d7028652fe
Remove legacy sniffer configuration: zoul
2016-08-12 01:23:50 +01:00
Benoît Thébaudeau
9e03df6cb7
CC2538: Use the 32.768-kHz crystal if present
...
Enable the 32.768-kHz crystal on all the CC2538 platforms where it is
present in order to get a better time accuracy.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-11 23:49:03 +02:00
Sumankumar Panchal
6dfd358821
TSCH port for CC2538 based platforms.
2016-07-22 09:38:25 +05:30
Antonio Lignan
d5e2a779d4
Added DHT22 sensor to Zoul-based platforms
2016-07-04 18:00:09 +02:00
Antonio Lignan
6360a09cc7
Merge pull request #1726 from feshie/pr-zoul-motes-flash-fix
...
zoul: Add support for flashing to multiple devices
2016-06-30 12:13:41 +02:00
Arthur Fabre
ab1652648e
zoul: Add support for flashing to multiple devices
...
This adds support for flashing to multiple devices, by implementing the
$MOTES option used by the Z1.
This replaces the $PORT interface, as it only allowed flashing to one
device at a time, and the $MOTES interface was still used for other
tasks (such as getting a list of connected devices).
A foreach loop is used to dynamically create an upload rule per device
that needs to be flashed.
The "main" upload rule depends on the device specific ones.
This allows for parallel flashing.
The PORT variable can still be sued for backwards compatibility.
Changed the MOTES variable that makes a $(shell) call to not be
recursively expanded.
2016-06-27 11:23:45 +01:00
George Oikonomou
4b67e21d2e
Merge pull request #1714 from alignan/pull/add-relay
...
Added generic relay driver for the zoul-based platforms
2016-06-13 19:45:46 +01:00
Simon Duquennoy
4fd8f67053
Merge pull request #1715 from sumanpanchal/zoul-tsch
...
TSCH port for Zolertia ReMote/Zoul.
2016-06-13 09:03:16 +02:00
Sumankumar Panchal
373fda46f7
TSCH port for Zolertia ReMote/Zoul.
2016-06-12 16:37:01 +05:30
Benoît Thébaudeau
9845973971
cc2538: Print SoC information upon startup
...
If STARTUP_CONF_VERBOSE is enabled, print SoC information upon startup.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-11 23:23:38 +02:00
Antonio Lignan
092f0e62fe
Added generic relay driver for the zoul-based platforms
2016-06-09 15:53:25 +02:00
Simon Duquennoy
64679642f2
Saving ROM and RAM
2016-06-03 16:44:06 +02:00
Antonio Lignan
c742d07803
Merge pull request #1695 from alignan/pull/fix-remote-pinout
...
Fixed CC2538/PIC labels being swapped
2016-06-01 23:34:42 +02:00
Antonio Lignan
f065971efc
Merge pull request #1619 from simonduq/pr/tsch-rtimer16-fix
...
Fix bug in TSCH for platforms with 16-bit rtimer
2016-06-01 23:03:50 +02:00
Antonio Lignan
10601b2e5c
Fixed CC2538/PIC labels being swapped
2016-06-01 14:28:53 +02:00
Benoît Thébaudeau
0079b78966
zoul: Make it possible to override COFFEE_CONF_SIZE
...
The projects need to be able to override it with project-conf.h.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-05-30 23:05:14 +02:00
Antonio Lignan
de64ed3975
Fixed typo
2016-05-24 10:50:20 +02:00
Simon Duquennoy
bb5e5d5c6b
TSCH: use RTIMER_CLOCK_DIFF to compute estimated drift, fixing a bug that would occur on 16-bit rtimer platforms
2016-04-27 14:13:33 +02:00
Toni Lozano
a81b4007b0
Allow to use up to 6xADC channels (now hardcoded), disabling the user button
...
(PA3) if ADC6 is enabled
2016-04-04 10:48:43 +02:00
Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Aitor Mejias
56aeb7cd7e
Added Zolertia Zonik sound sensor test and drivers
2016-02-22 16:49:35 +01:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
d4251d7c3b
Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
...
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou
9e9e6d07b0
Adjust READMEs to point explicitly to the arm-gcc version used by travis
2016-01-24 13:59:19 +00:00
Antonio Lignan
9a5682b75b
Merge pull request #1476 from alignan/pull/update-weather-meter
...
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
66ebca3ade
Updated to new adc-zoul renaming
2016-01-23 15:42:13 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Antonio Lignan
98ed8a29a0
Removed harsh restriction on mask values and disabled debug flags
2016-01-19 22:28:09 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
