Simon Duquennoy
dea04c67d7
Change the default IPv6 prefix from aaaa::/64 to fd00::/64
2016-03-07 17:47:44 +01:00
Nicolas Tsiftes
17714c2111
Merge pull request #1299 from sumanpanchal/wismote-nodeid-burn-restore-frm-xmem
...
Burn and restore node id using external flash of Wismote
2015-10-26 18:41:28 +01:00
suman_panchal
5a07279c4f
Burn and restore node id using external flash of Wismote
2015-10-24 18:24:38 +05:30
Nicolas Tsiftes
bebf0f9156
Merge pull request #1246 from nvt/wismote-fixes
...
Minor fixes for the WisMote platform
2015-09-08 13:52:45 +02:00
Atis Elsts
2f79810b58
Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy.
2015-09-04 11:46:00 +02:00
Simon Duquennoy
265b65c67c
Fix Wismote randon_init for link-layer addresses shorter than 8 bytes
2015-09-01 19:57:37 +02:00
Simon Duquennoy
4904386f41
Wismote: init random seed
2015-09-01 10:51:25 +02:00
sumanpanchal
fd5b03b767
WISMOTE external flash driver support
2015-08-24 22:50:22 +05:30
Nicolas Tsiftes
3d284f8ecd
Use the new path to a header file.
2015-05-25 16:52:12 +02:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
Adam Dunkels
45265249fc
Changed the name of the rimeaddr module to linkaddr
2014-01-29 20:12:24 +01:00
Adam Dunkels
8eace27f9b
Moved net/rime.h to net/rime/rime.h
2014-01-26 23:20:45 +01:00
Adam Dunkels
c9efe3c3c4
Moved the cc2520 driver into its own dev/cc2520 module
2014-01-26 23:20:31 +01:00
Adam Dunkels
5f3fe7f7c7
Updated include paths for the moved files under net/
2014-01-26 23:20:23 +01:00
Adam Dunkels
523c03e4b8
Removed old unused profile.h code
2013-11-19 08:31:52 +01:00
Adam Dunkels
ec8c7e9be0
Cleanup of the node-id.h files. The node-id.h file contains
...
declarations of functions for setting and getting a node ID number, a
functionality that exists on many platforms. Since this functionality
was not considered part of the Contiki core, each platform defined its
own node-id.h file. This commit attempts to clean this up by
collecting the node-id.h into a core/sys/node-id.h file that replaces
the old node-id.h files from the platform directories.
2012-11-20 19:59:46 +01:00
Niclas Finne
919ddfbf09
Added delay at startup to let things stabilize before writing to the uart
2012-09-19 22:47:48 +02:00
Niclas Finne
b6ed988709
Allow node address to be set by COOJA when emulating.
2012-05-29 19:42:35 +02:00
Niclas Finne
cdfa8708e3
* Added f2xxx for two series (for example z1)
...
* f1xxx is baseline and always included
* Cleaned up the names of uart and spi (no x in names)
* Updated SPI configuration for WiSMote
2012-01-09 14:54:57 +01:00
Niclas Finne
f4f84ffca4
Updated SPI config for faster SPI, split msp430/clock/spi into separate versions for MSP430/MSP430X
2012-01-09 14:54:01 +01:00
Niclas Finne
d1b22d40fa
leds setup for WiSMote
2012-01-09 14:41:45 +01:00
Niclas Finne
6c5379606b
Set node_id, disabled watchdog for now
2012-01-09 14:39:32 +01:00
Niclas Finne
05b10eb9ce
Initial WiSMote port based on code from Arago Systems.
2012-01-09 12:25:06 +01:00
