dak664
5c098993df
Add initial file
2011-02-07 20:30:47 -05:00
dak664
f1f32c8e6a
Add combined MCU and radio ATmega128rfa1
2011-02-07 13:46:34 -05:00
dak664
662b0e064c
Revert Larsson patch, setting this to 0x3f truncated jackdaw Tx packets to 64 bytes.
2010-12-22 22:49:16 +00:00
dak664
5b8e62ef4f
Patches from R Larsson
2010-12-22 20:10:00 +00:00
dak664
e3e1e04948
Add FCS comments and text2pcap dump routines of Roger Larsson.
...
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664
5623ad827b
Enable radio off and sleep modes.
2010-12-18 20:49:00 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
dak664
110bc0242e
Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum
2010-09-17 21:59:09 +00:00
dak664
cb45883970
Turn on DEBUGFLOW and software CRC computation
2010-06-18 15:44:53 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
dak664
01a3912864
Define and use radio STATE_TRANSITION, improve debug messaging
2010-03-02 16:29:59 +00:00
dak664
d61676b8f7
Add RADIOALWAYSON to monitor packet losses with low power protocols
2010-02-28 21:19:33 +00:00
dak664
5debc183a9
Enable radio stats in sensor cgi as default
2010-02-26 21:38:57 +00:00
dak664
844b3a34f7
Platform 0 was matching by default
2010-02-26 21:15:28 +00:00
dak664
4ded42db1e
Add sniffer and 802 frame reporting
2010-02-23 17:37:51 +00:00
dak664
b4bc7fc3da
Make RF230BB the default radio driver
2010-02-23 02:01:46 +00:00
dak664
cbb8621e30
update to new driver format
2010-02-22 22:23:18 +00:00
dak664
fee5efb141
additions for cxmac
2010-02-18 17:20:50 +00:00
dak664
893a31f49b
Jackdaw additions
2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6
Add RADIOSTATS
2010-02-12 18:00:30 +00:00
dak664
a6ab27402a
Add RADIOSTATS
2010-02-12 16:41:02 +00:00
joxe
3e8c63cc09
added radio-makefile for avr + rf230 platforms
2009-09-07 12:05:12 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
c62efce258
Add useful comment, fix compiler warnings
2009-07-17 13:47:10 +00:00
dak664
1de298c72a
*** empty log message ***
2009-07-08 16:17:07 +00:00
dak664
9aee8dbc16
Fixed bug of no current consequence
2009-07-05 18:50:44 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
c_oflynn
9fb2c9d836
* Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
...
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
c_oflynn
5ff23c0bec
Addition of Atmel Radio Control Board (RCB), device in RZ200 kit
2008-11-09 15:39:49 +00:00
c_oflynn
f13ec95efa
*** empty log message ***
2008-11-08 03:29:15 +00:00
c_oflynn
46853d9395
* Channel is saved in EEPROM
...
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn
6e3ee0d917
More updates for raven
2008-10-14 18:38:09 +00:00
c_oflynn
a73ed65dac
Fixing more possible out of date files.
2008-10-14 18:37:28 +00:00
c_oflynn
15ba03fea5
Adding updated files
2008-10-14 18:36:07 +00:00
c_oflynn
9cc14d43ef
Fixing some files...
2008-10-14 18:35:29 +00:00
adamdunkels
db7d9bb131
Radio and 802.15.4 MAC code for the Atmel AVR Raven board
2008-10-14 09:43:40 +00:00
