Commit graph

106 commits

Author SHA1 Message Date
Andreas Urke 835a6aa6e6 Move RF_CHANNEL such that it is applied for prop mode as well 2016-11-27 16:13:58 +01:00
Antonio Lignan fc582606f2 Harmonize RF_CHANNEL definition 2016-11-25 10:37:14 +01:00
g.oikonomou@bristol.ac.uk ec4b403e77 Allow and document IEEE mode for CC13xx 2016-10-07 10:05:14 +01:00
George Oikonomou 6f44fb8c44 Merge pull request #1783 from g-oikonomou/bugfix/cc13xx/contikimac-timings
Adjust ContikiMAC timings for CC13xx PROP mode
2016-08-17 14:06:07 +01:00
Antonio Lignan cb42bafbfb Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
George Oikonomou dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou 47265c9305 Merge pull request #1813 from arurke/cc26xx_cc13xx_i2c_fixes
CC26xx/CC13xx fix for burst TX followed by burst RX
2016-08-11 23:47:42 +01:00
Benoît Thébaudeau ae5205f9e2 doxygen: Fix orphan modules
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Andreas Urke 8128986ccd Remove unecessary bool 2016-08-09 22:56:53 +02:00
Andreas Urke e1359519ab Fix i2c multiple write bug, as reported by Ron Segal: https://sourceforge.net/p/contiki/mailman/message/34633862/ 2016-08-09 22:56:28 +02:00
George Oikonomou 4495d14702 Make ROM bootloader configurable through contiki- or project-conf.h 2016-07-17 00:26:52 +01:00
George Oikonomou 01590088d3 Update to latest CCxxwares: Srf06+EM drivers 2016-07-17 00:26:52 +01:00
George Oikonomou f6437b6086 Update to latest CCxxwares: Sensortag drivers 2016-07-17 00:26:52 +01:00
George Oikonomou 5de7b1bbac Update to latest CCxxwares: Launchpad drivers 2016-07-17 00:26:51 +01:00
George Oikonomou c42cb2b0cb Update to latest CCxxwares: common drivers 2016-07-17 00:26:51 +01:00
George Oikonomou c87e579b06 Adjust ContikiMAC timings for CC13xx PROP mode
#1684 slightly varied RF startup time and, as a result, threw ContikiMAC timing configuration off. This manifests itself with very poor CC13xx PROP mode radio performance, as documented in #1747.

This pull fixes this bug by slightly increasing ContikiMAC's inter-packet interval. This gives the receiver a little more time to respond with an ACK to unicast frames.

Fixes #1747
2016-07-17 00:04:07 +01:00
George Oikonomou dcad5e7e3f Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou fe571c7dc3 Merge pull request #1754 from atiselsts/enhancement/cc26xx_reduced_guard_time
CC26xx: change default TSCH guard time to 1.8ms
2016-07-16 19:47:16 +01:00
Atis Elsts 081ec100a4 TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received 2016-07-16 18:08:41 +01:00
Atis Elsts b6617f17c5 CC26xx: always request HF crystal oscillator at radio on() 2016-06-29 16:41:33 +03:00
George Oikonomou 91255f5a81 Merge pull request #1711 from xukai871105/master
One fix to sensorTag board_i2c.c
2016-06-28 23:55:02 +01:00
Atis Elsts 1e4141b589 CC26xx: change default TSCH guard time to 1.8ms 2016-06-29 01:14:12 +03:00
George Oikonomou 3a105f2141 Disable CC2650_FAST_RADIO_STARTUP by default
`CC2650_FAST_RADIO_STARTUP` is required for TSCH, but it currently breaks ContikiMAC. We set the default value to the one that will work with the default choice of RDC.

Fixes #1744
2016-06-27 17:20:26 +01:00
George Oikonomou adfeaa5500 Add missing include 2016-06-15 10:31:55 +01:00
Atis Elsts 3a99639294 cc26xx: implement CC2650_FAST_RADIO_STARTUP option, required for TSCH 2016-06-14 00:54:33 +03:00
Atis Elsts 3ff8aa8ad8 srf06-cc26xx: add node_id variable 2016-06-14 00:54:32 +03:00
Atis Elsts f99511f494 srf06-cc26xx: add default TSCH configuration for the platform 2016-06-14 00:54:32 +03:00
xukai a1ea6d311f Fix i2c bug in sensortag flatform. 2016-06-08 15:09:00 +08:00
Antonio Lignan ee0b02c819 Merge pull request #1684 from g-oikonomou/contrib/cc26xx/aux-ctrl-and-adc
Add CC13xx/CC26xx AUX controller module, ADC support, ALS driver and example
2016-06-07 14:36:28 +02:00
Antonio Lignan 6fc4e2535c Merge pull request #1665 from g-oikonomou/contrib/cc26xx-bsl
Consolidate .upload for all CC26xx/CC13xx boards and add login make target
2016-06-01 23:37:29 +02:00
Antonio Lignan f065971efc Merge pull request #1619 from simonduq/pr/tsch-rtimer16-fix
Fix bug in TSCH for platforms with 16-bit rtimer
2016-06-01 23:03:50 +02:00
George Oikonomou 2ec9c8ccf0 Add ALS support for Srf06 + CC13xx/CC26xxEM
This provides an example on how to use the CC13xx / CC26xx ADC
2016-05-29 15:05:13 +01:00
George Oikonomou 80efd730ae Extend the flash driver to support the MX25R1635F
According to the CC1310LP design files, the flash on it is the same as the flash on the CC2650 LP (MX25R8035F 8Mbit). However, the flash on some CC1310 LPs reportedly identifies itself as the 16Mbit one (MX25R1635F). Instruction sets are identical, we simply need to tell the driver to recognise this part's Device ID.
2016-05-14 20:34:08 +01:00
George Oikonomou 06f4463996 Extend documentation to include the CC1310 LaunchPad 2016-05-14 20:32:17 +01:00
George Oikonomou 099a933c90 Add support for the CC1310 LaunchPad 2016-05-14 20:32:17 +01:00
George Oikonomou cd5a0ef291 Consolidate .upload for all CC26xx/CC13xx boards
The block that controls the `.upload` target is unnecessarily replicated in multiple sub-board Makefiles. This was originally done because the SmartRF and the Launchpad can be programmed with the c2538-bsl script, whereas the sensortag cannot.

This commit moves the `cc2538-bsl` / `.upload` target logic to the top level cpu Makefile (`cpu/cc26xx-cc13xx/Makefile.cc26xx-cc13xx`). Board makefiles simply set the make variable `BOARD_SUPPORTS_BSL` to 1 to signal that they can be programmed by the BSL script. If `BOARD_SUPPORTS_BSL` is not equal to 1, trying to use the `.upload` target will return an error message.

For example:

```
$ make BOARD=sensortag/cc2650 cc26xx-demo.upload
using saved target 'srf06-cc26xx'
This board cannot be programmed with the ROM bootloader and therefore does not support the .upload target.
```
2016-05-14 19:30:53 +01:00
Pablo Corbalán 5bc158fa75 Add upload script to Makefile.launchpad 2016-05-13 23:06:33 +01:00
Simon Duquennoy bb5e5d5c6b TSCH: use RTIMER_CLOCK_DIFF to compute estimated drift, fixing a bug that would occur on 16-bit rtimer platforms 2016-04-27 14:13:33 +02:00
George Oikonomou de2ecf8e3a Document that LaunchPads can be programmed with cc2538-bsl 2016-03-21 00:00:38 +00:00
George Oikonomou deb633216c Document support for the CC2650 LaunchPad 2016-01-28 11:23:20 +00:00
George Oikonomou 387bb96ca4 Add support for the CC2650 LaunchPad 2016-01-28 11:23:20 +00:00
George Oikonomou 5eb0470ad4 Move the SPI and Ext Flash Driver to a common directory
This commit creates a `common` directory, aimed to host drivers supported by multiple boards of the CC13xx/CC26xx family.

We move the Sensortag SPI and External Flash drivers to this location and we change the Sensortag build system to pull the  respective files from therein.
2016-01-28 11:23:20 +00:00
George Oikonomou 24871b0702 Extend the Sensortag external flash Driver to support more parts
The driver currently supports two Winbond external flash parts with identical instruction sets. The instruction set of the Macronix MX25R8035F appears to be a superset. We therefore change the driver to add the MID/DID of the Macronix to the list of supported parts.

This will subsequently allow us to share the same driver for both the SensorTag and the CC2650 LauchPad.
2016-01-28 11:23:19 +00:00
Antonio Lignan 9f1376d37a Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
George Oikonomou 9e9e6d07b0 Adjust READMEs to point explicitly to the arm-gcc version used by travis 2016-01-24 13:59:19 +00:00
George Oikonomou 6933b35bb5 Rename select() in various sensortag sensor drivers
This is to prevent a compile error caused by function prototype conflict between a function called `select()` (present in a number of sensortag peripheral drivers) and the one in `sys/select.h`. The error manifests itself with gcc-arm-embedded version 5.2.1 20151202 (2015-q4).

To fix the error we simply rename our function.

Fixes #1434
2016-01-10 15:47:34 +00:00
Simon Duquennoy ebc8d9fb1c Merge pull request #1344 from tsparber/fix-doxygen
doxygen: Fixed all warnings
2015-11-30 22:07:15 +01:00
Jelmer Tiete 715946ece3 Restructured cc26xx readme, included use of .upload and PORT variable. Added sleepy demo example to examples section. 2015-11-23 11:09:06 -08:00
Jelmer Tiete 9a8e749f6f Updated cc26xx Readme to mention serial upload script 2015-11-23 11:09:05 -08:00
Jelmer Tiete 97095c8bb5 Updated makefiles of srf06 platform to support uploading via cc2538-bsl script 2015-11-23 11:07:19 -08:00