Commit graph

11098 commits

Author SHA1 Message Date
Jelmer Tiete 7b4a9c8410 Small correction to cc26xx readme, code block in list was not propperly indented 2015-11-09 01:01:21 -08:00
George Oikonomou a63efe947f Merge pull request #1233 from adamdunkels/pr/26xx-13xx-fixes
CC26xx/CC13xx fixes
2015-11-09 08:33:58 +00:00
Oliver Schmidt 70dce80932 Merge pull request #1355 from oliverschmidt/master
Several minor adjustments.
2015-11-04 20:31:59 +01:00
George Oikonomou 3aa4547327 Merge pull request #1257 from bkozak-scanimetrics/cc26xx_fully_turnoff_radio
CC26xx - fully shutdown the rf-core & abort rx op
2015-11-04 15:45:05 +00:00
Oliver Schmidt 8e9da827c0 Several minor adjustments. 2015-11-03 22:09:24 +01:00
Nicolas Tsiftes 139f427458 Merge pull request #1337 from tsparber/pr-ccittcrc-crlf
CCITT_CRC.java Change line endings from CRLF to LF
2015-11-02 14:00:51 +01:00
Nicolas Tsiftes 2e07e1fc48 Merge pull request #1329 from tsparber/serialdump-fix-warnings
Fix serialdump.c warnings (clang)
2015-11-02 13:59:21 +01:00
Andreas Urke 857d69a338 Remove stray stars in comments 2015-11-02 13:23:40 +01:00
Andreas Urke 8159297bfd Add configuration of DIS interval and DIS start delay to rpl-conf.h
Make a define for configuration of DIS start delay and move it + existing DIS interval conf into RPL-conf.h
2015-11-02 13:23:33 +01:00
Antonio Lignan 6037e269a8 Merge pull request #1336 from sumanpanchal/z1-uart0-dma
Zolertia Z1: Direct memory access using UART.
2015-11-02 08:47:08 +01:00
George Oikonomou 984b8cd631 Configure ContikiMAC timings for CC13xx sub-ghz operation
This is required so that ContikiMAC will keep working correctly after the recent change that also turns off the RF analog part during duty cycling.
2015-11-01 23:21:04 +00:00
George Oikonomou 54648591ee Explicitly send CMD_ABORT in prop mode before powering down 2015-11-01 22:53:35 +00:00
Oliver Schmidt 0105454524 Merge pull request #1349 from oliverschmidt/master
Log web browser page attributes free memory left.
2015-11-01 22:11:26 +01:00
George Oikonomou f401c7cc60 Save new TX power setting even if the RFC is powered off.
The current logic attempts to send `CMD_SET_TX_POWER` before saving the new power setting. If `CMD_SET_TX_POWER` fails the power setting will not get saved. As a result, when the RFC is powered off, all attempts to change TX power will fail.

This commit changes this logic to always save the new TX setting as requested by the user. If the RFC is powered up, we apply it immediately. If it is powered down, the new setting will automatically be applied next time we send `CMD_RADIO_SETUP`.

Fixes #1340
2015-11-01 20:56:52 +00:00
George Oikonomou 1ee40ef021 Fix the logic that detects whether a command is a Radio OP 2015-11-01 20:48:28 +00:00
George Oikonomou 946b72a58d Mask CMDSTA when waiting for a command to get accepted 2015-11-01 20:46:46 +00:00
Oliver Schmidt 0303944d0c Log web browser page attributes free memory left.
After page loading has finished the number of free bytes left for page attributes is logged. It turns out that "usual" pages tend to get along with ~800 bytes while i.e. the Google search pages use all of the 2000 bytes of page attribute memory allocated by default (because of the long URLs with many parameters). So it seems that reducing this default isn't exactly the best way to reduce memory consumption...
2015-11-01 21:22:19 +01:00
Oliver Schmidt 9962d0720a Merge pull request #1347 from oliverschmidt/master
Removed CC_FASTCALL.
2015-11-01 19:36:07 +01:00
Oliver Schmidt 1639b712bb Removed CC_FASTCALL.
CC_FASTCALL was introduced many years ago for the cc65 tool chain. It was never used for another tool chain. With a798b1d648 the cc65 tool chain doesn't need CC_FASTCALL anymore.
2015-11-01 18:10:17 +01:00
Oliver Schmidt 19cb3227ca Merge pull request #1346 from oliverschmidt/master
Client requested close takes precedence over server initiated close.
2015-11-01 16:34:40 +01:00
Oliver Schmidt 1066bb1a0b Client requested close takes precedence over server initiated close.
When the client has already called webclient_close() it doesn't expect to have webclient_datahandler(NULL, 0) called just because the connection was closed by the server "at the same time". Rather it expects to always have webclient_closed() called.

Calling webclient_datahandler(NULL, 0) instead of webclient_closed() means that the web browser shows "Done" in the status line instead of "Stopped". So the user is mislead to think that he has already seen all of the page.

Note: webclient_close() is called by the client during newdata() so the already existing check for WEBCLIENT_STATE_CLOSE further above doesn't help.
2015-11-01 15:34:09 +01:00
Oliver Schmidt 185be73014 Just some minor optimizations. 2015-11-01 15:18:29 +01:00
Oliver Schmidt 692fbf5422 Merge pull request #1343 from oliverschmidt/master
Added 80 column IRC client / web browser for the C64.
2015-10-31 15:18:10 +01:00
Oliver Schmidt 8082ddac41 Adjusted tests to recent changes.
The email and ftp programs aren't relevant anymore so support for them was removed from the cc65 builds. The explicit 80 column programs were added. The 80 colum web browser and Telnet server are built for all cc65 platforms as they are the largest and as such show best code increase issues.
2015-10-31 12:36:37 +01:00
suman_panchal 35cc40563e Zolertia Z1: Direct memory access using UART. 2015-10-31 11:45:13 +05:30
Oliver Schmidt 5443c740e9 Added 80 column IRC client / web browser for the C64.
Recently support for 80 column CONIO based on 320x200 graphics was added to the cc65 C library for the C64. This change leverages this for the IRC client and the web browser. Because not everybody prefers this 'soft80' display with its small 4x8 charbox the 40 column programs are still available as before (with the new programs called 'irc80' and 'webbrowser80').
2015-10-30 16:48:00 +01:00
Oliver Schmidt fb5d0b7ef0 Made 80 column display a cc65 application attribute.
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
Oliver Schmidt a70b97764a Merge pull request #1342 from oliverschmidt/master
Adjusted cc65 constructor to recent cc65 change.
2015-10-29 23:12:28 +01:00
Oliver Schmidt 634db88fe0 Adjusted cc65 constructor to recent cc65 change.
With 0ee9b2e446 cc65 constructor may not use the BSS anymore.
2015-10-29 22:25:48 +01:00
Tommy Sparber d817540f19 CCITT_CRC.java Change line endings from CRLF to LF
and remove trailing whitespaces.
2015-10-29 22:54:12 +11:00
George Oikonomou 3e0f37090c Merge pull request #1324 from msloth/master
Remove LED fade in lpm.c
2015-10-29 11:36:39 +00:00
George Oikonomou e768ff95b1 Merge pull request #1339 from msloth/feature-cc26xx-13xx-lpm-no-wakeup-pin
[cc26xx-cc13xx] allow lpm_shutdown() without a wake-up pin set
2015-10-29 11:31:37 +00:00
Oliver Schmidt a5f21feb4f Merge pull request #1331 from oliverschmidt/master
Rearranged ATARI memory usage.
2015-10-28 17:25:39 +01:00
Antonio Lignan 1759411e55 Merge pull request #1280 from alignan/cc1200-changes
Made CC1200 test mode and rx watchdog selectable
2015-10-28 15:42:14 +01:00
Oliver Schmidt 5024468c2f Rearranged ATARI memory usage.
The cc65 memory map for the ATARI XL has two holes so the linker needs hints which object files go where. Source changes lead to object file size changes requiring now and then to rearrange the object files.
2015-10-28 12:22:43 +01:00
Oliver Schmidt 9f42c53e7f Merge pull request #1330 from oliverschmidt/master
Have Git ignore .zip files.
2015-10-28 12:13:46 +01:00
Marcus Linderoth 1906bff17c allow lpm_shutdown without a wake-up pin set 2015-10-28 11:06:26 +01:00
Marcus Linderoth ea7a5d1c63 Remove fade away of LED when going into shutdown mode; it consumes power and is application-layer stuff. 2015-10-28 10:51:37 +01:00
Oliver Schmidt b4ed3d65d4 Have Git ignore .zip files.
.zip files are are common build artifacts but never sources.
2015-10-28 09:47:22 +01:00
Tommy Sparber 64c66efd7f Fix serialdump.c warnings (clang)
Using clang (on osx) yields to some warnings
(conversion between signed/unsigned, unused variable)
which gcc would only produce when used with -Wall.
This commit fixes those.
2015-10-28 17:46:59 +11:00
Marco Grella e261cda8dc Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1 2015-10-27 12:12:59 +01:00
Nicolas Tsiftes 17714c2111 Merge pull request #1299 from sumanpanchal/wismote-nodeid-burn-restore-frm-xmem
Burn and restore node id using external flash of Wismote
2015-10-26 18:41:28 +01:00
George Oikonomou 55b41863d5 Remove redundant function calls in CC26xx RFC code
As discussed in #1279, the current CC13xx/CC26xx rf-core code makes some unnecessary power domain-related reads. This commit removes them.

Closes #1279
2015-10-24 20:54:33 +01:00
George Oikonomou 8636a28248 Clear interrupt flags selectively
As discussed in #1294, every time a CC13xx/CC26xx RF interrupt fires, we clear all interrupt flags unconditionally. This may result in missed events. This patch fixes this bug by clearing only the flag that triggered the interrupt in the first place.

Fixes #1294
2015-10-24 20:51:34 +01:00
suman_panchal 5a07279c4f Burn and restore node id using external flash of Wismote 2015-10-24 18:24:38 +05:30
Nicolas Tsiftes 566b251797 Merge pull request #1243 from unmole/coap_fix
CoAP: Fix handling of Token Length greater than 8
2015-10-23 17:58:15 +02:00
Simon Duquennoy 93cd91fbda Merge pull request #1198 from simonduq/tunslip6
new tunslip6 features
2015-10-23 11:10:22 +02:00
Simon Duquennoy 0e31bb12ea Moved generic baudrate defines and selection code to a new module tools/tools-utils.[ch] 2015-10-23 10:54:58 +02:00
Simon Duquennoy 88118482a8 Added more baudrates, added missing defs for MacOS 2015-10-23 10:54:57 +02:00
Simon Duquennoy 55d81ddd3a tunslip6: support MTU configuration, XON/XOFF flow control, and baudrates up
to 1000000 mbps
2015-10-23 10:54:57 +02:00