tunslip6: support MTU configuration, XON/XOFF flow control, and baudrates up
to 1000000 mbps
This commit is contained in:
parent
9171ba17fc
commit
55d81ddd3a
|
@ -62,7 +62,7 @@ const char *netmask;
|
|||
int slipfd = 0;
|
||||
uint16_t basedelay=0,delaymsec=0;
|
||||
uint32_t startsec,startmsec,delaystartsec,delaystartmsec;
|
||||
int timestamp = 0, flowcontrol=0, showprogress=0;
|
||||
int timestamp = 0, flowcontrol=0, showprogress=0, flowcontrol_xonxoff=0;
|
||||
|
||||
int ssystem(const char *fmt, ...)
|
||||
__attribute__((__format__ (__printf__, 1, 2)));
|
||||
|
@ -75,6 +75,10 @@ void slip_send_char(int fd, unsigned char c);
|
|||
|
||||
char tundev[1024] = { "" };
|
||||
|
||||
/* IPv6 required minimum MTU */
|
||||
#define MIN_DEVMTU 1500
|
||||
int devmtu = MIN_DEVMTU;
|
||||
|
||||
int
|
||||
ssystem(const char *fmt, ...) __attribute__((__format__ (__printf__, 1, 2)));
|
||||
|
||||
|
@ -91,11 +95,15 @@ ssystem(const char *fmt, ...)
|
|||
return system(cmd);
|
||||
}
|
||||
|
||||
#define SLIP_END 0300
|
||||
#define SLIP_ESC 0333
|
||||
#define SLIP_ESC_END 0334
|
||||
#define SLIP_ESC_ESC 0335
|
||||
#define SLIP_END 0300
|
||||
#define SLIP_ESC 0333
|
||||
#define SLIP_ESC_END 0334
|
||||
#define SLIP_ESC_ESC 0335
|
||||
|
||||
#define SLIP_ESC_XON 0336
|
||||
#define SLIP_ESC_XOFF 0337
|
||||
#define XON 17
|
||||
#define XOFF 19
|
||||
|
||||
/* get sockaddr, IPv4 or IPv6: */
|
||||
void *
|
||||
|
@ -287,6 +295,12 @@ serial_to_tun(FILE *inslip, int outfd)
|
|||
case SLIP_ESC_ESC:
|
||||
c = SLIP_ESC;
|
||||
break;
|
||||
case SLIP_ESC_XON:
|
||||
c = XON;
|
||||
break;
|
||||
case SLIP_ESC_XOFF:
|
||||
c = XOFF;
|
||||
break;
|
||||
}
|
||||
/* FALLTHROUGH */
|
||||
default:
|
||||
|
@ -330,6 +344,22 @@ slip_send_char(int fd, unsigned char c)
|
|||
slip_send(fd, SLIP_ESC);
|
||||
slip_send(fd, SLIP_ESC_ESC);
|
||||
break;
|
||||
case XON:
|
||||
if(flowcontrol_xonxoff) {
|
||||
slip_send(fd, SLIP_ESC);
|
||||
slip_send(fd, SLIP_ESC_XON);
|
||||
} else {
|
||||
slip_send(fd, c);
|
||||
}
|
||||
break;
|
||||
case XOFF:
|
||||
if(flowcontrol_xonxoff) {
|
||||
slip_send(fd, SLIP_ESC);
|
||||
slip_send(fd, SLIP_ESC_XOFF);
|
||||
} else {
|
||||
slip_send(fd, c);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
slip_send(fd, c);
|
||||
break;
|
||||
|
@ -415,6 +445,22 @@ write_to_serial(int outfd, void *inbuf, int len)
|
|||
slip_send(outfd, SLIP_ESC);
|
||||
slip_send(outfd, SLIP_ESC_ESC);
|
||||
break;
|
||||
case XON:
|
||||
if(flowcontrol_xonxoff) {
|
||||
slip_send(outfd, SLIP_ESC);
|
||||
slip_send(outfd, SLIP_ESC_XON);
|
||||
} else {
|
||||
slip_send(outfd, p[i]);
|
||||
}
|
||||
break;
|
||||
case XOFF:
|
||||
if(flowcontrol_xonxoff) {
|
||||
slip_send(outfd, SLIP_ESC);
|
||||
slip_send(outfd, SLIP_ESC_XOFF);
|
||||
} else {
|
||||
slip_send(outfd, p[i]);
|
||||
}
|
||||
break;
|
||||
default:
|
||||
slip_send(outfd, p[i]);
|
||||
break;
|
||||
|
@ -467,6 +513,12 @@ stty_telos(int fd)
|
|||
tty.c_cflag |= CRTSCTS;
|
||||
else
|
||||
tty.c_cflag &= ~CRTSCTS;
|
||||
tty.c_iflag &= ~IXON;
|
||||
if(flowcontrol_xonxoff) {
|
||||
tty.c_iflag |= IXOFF | IXANY;
|
||||
} else {
|
||||
tty.c_iflag &= ~IXOFF & ~IXANY;
|
||||
}
|
||||
tty.c_cflag &= ~HUPCL;
|
||||
tty.c_cflag &= ~CLOCAL;
|
||||
|
||||
|
@ -609,7 +661,7 @@ ifconf(const char *tundev, const char *ipaddr)
|
|||
{
|
||||
#ifdef linux
|
||||
if (timestamp) stamptime();
|
||||
ssystem("ifconfig %s inet `hostname` up", tundev);
|
||||
ssystem("ifconfig %s inet `hostname` mtu %d up", tundev, devmtu);
|
||||
if (timestamp) stamptime();
|
||||
ssystem("ifconfig %s add %s", tundev, ipaddr);
|
||||
|
||||
|
@ -670,7 +722,7 @@ ifconf(const char *tundev, const char *ipaddr)
|
|||
prefix = "64";
|
||||
}
|
||||
if (timestamp) stamptime();
|
||||
ssystem("ifconfig %s inet6 up", tundev );
|
||||
ssystem("ifconfig %s inet6 mtu %d up", tundev, devmtu);
|
||||
if (timestamp) stamptime();
|
||||
ssystem("ifconfig %s inet6 %s add", tundev, ipaddr );
|
||||
if (timestamp) stamptime();
|
||||
|
@ -679,7 +731,7 @@ ifconf(const char *tundev, const char *ipaddr)
|
|||
}
|
||||
#else
|
||||
if (timestamp) stamptime();
|
||||
ssystem("ifconfig %s inet `hostname` %s up", tundev, ipaddr);
|
||||
ssystem("ifconfig %s inet `hostname` %s mtu %d up", tundev, ipaddr, devmtu);
|
||||
if (timestamp) stamptime();
|
||||
ssystem("sysctl -w net.inet.ip.forwarding=1");
|
||||
#endif /* !linux */
|
||||
|
@ -708,7 +760,7 @@ main(int argc, char **argv)
|
|||
prog = argv[0];
|
||||
setvbuf(stdout, NULL, _IOLBF, 0); /* Line buffered output. */
|
||||
|
||||
while((c = getopt(argc, argv, "B:HILPhs:t:v::d::a:p:T")) != -1) {
|
||||
while((c = getopt(argc, argv, "B:HILPhXM:s:t:v::d::a:p:T")) != -1) {
|
||||
switch(c) {
|
||||
case 'B':
|
||||
baudrate = atoi(optarg);
|
||||
|
@ -718,10 +770,20 @@ main(int argc, char **argv)
|
|||
flowcontrol=1;
|
||||
break;
|
||||
|
||||
case 'X':
|
||||
flowcontrol_xonxoff=1;
|
||||
break;
|
||||
|
||||
case 'L':
|
||||
timestamp=1;
|
||||
break;
|
||||
|
||||
case 'M':
|
||||
devmtu=atoi(optarg);
|
||||
if(devmtu < MIN_DEVMTU) {
|
||||
devmtu = MIN_DEVMTU;
|
||||
}
|
||||
|
||||
case 'P':
|
||||
showprogress=1;
|
||||
break;
|
||||
|
@ -782,8 +844,10 @@ fprintf(stderr," -B baudrate 9600,19200,38400,57600,115200 (default),230400\n
|
|||
#endif
|
||||
fprintf(stderr," -H Hardware CTS/RTS flow control (default disabled)\n");
|
||||
fprintf(stderr," -I Inquire IP address\n");
|
||||
fprintf(stderr," -X Software XON/XOFF flow control (default disabled)\n");
|
||||
fprintf(stderr," -L Log output format (adds time stamps)\n");
|
||||
fprintf(stderr," -s siodev Serial device (default /dev/ttyUSB0)\n");
|
||||
fprintf(stderr," -M Interface MTU (default and min: 1280)\n");
|
||||
fprintf(stderr," -T Make tap interface (default is tun interface)\n");
|
||||
fprintf(stderr," -t tundev Name of interface (default tap0 or tun0)\n");
|
||||
fprintf(stderr," -v[level] Verbosity level\n");
|
||||
|
@ -836,9 +900,18 @@ exit(1);
|
|||
case 460800:
|
||||
b_rate = B460800;
|
||||
break;
|
||||
case 500000:
|
||||
b_rate = B500000;
|
||||
break;
|
||||
case 576000:
|
||||
b_rate = B576000;
|
||||
break;
|
||||
case 921600:
|
||||
b_rate = B921600;
|
||||
break;
|
||||
case 1000000:
|
||||
b_rate = B1000000;
|
||||
break;
|
||||
#endif
|
||||
default:
|
||||
err(1, "unknown baudrate %d", baudrate);
|
||||
|
|
Loading…
Reference in a new issue