deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
8811 commits 6 branches 13 tags 80 MiB
Commit graph

988 commits

Author SHA1 Message Date
dak664
e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson. 
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
 2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664
5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
adamdunkels
f370b217a5 Turned up the rtimer resolution to 32678 Hz. 2010-12-16 22:50:21 +00:00
adamdunkels
1d090ea0f5 Made configuration of CC2420 SFD timestamps easier 2010-12-16 22:49:33 +00:00
adamdunkels
c0fedd7661 Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module 2010-12-16 22:49:12 +00:00
dak664
570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664
1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664
c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson. 
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
 2010-12-03 20:42:01 +00:00
dak664
21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664
0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions. 
Minor speed optimizations.
 2010-11-30 19:47:40 +00:00
nifi
7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels
4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664
69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664
9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi
5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira
3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira
9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira
6da84819dd use stdint.h instead of custom types.h 
stdint.h is more portable across compilers
 2010-11-10 22:06:28 +00:00
maralvira
e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru
28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira
dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira
1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira
3b515587c5 change how prepare and transmit work --- Contiki expects to call 
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
 2010-11-07 20:07:42 +00:00
maralvira
e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira
4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira
29333232d5 add section .start and undef _start so that _start is placed by the 
linker correctly
 2010-11-07 14:57:53 +00:00
maralvira
b8ebce0fef add a memory section for RAM so that the linker will warn when you've 
made your program too big.
 2010-11-07 14:54:05 +00:00
maralvira
8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira
f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira
57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira
77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira
c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for 
some reason.
 2010-11-07 14:42:02 +00:00
maralvira
dab7faf13c Add gpio_set and gpio_reset 
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
 2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira
4217eb2ebc Provide a function to change timer interrrupt handlers 
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
 2010-11-07 14:27:01 +00:00
maralvira
65d3942c76 Add the disable_int({}) macro 
This is similar to safe_irq_enable and disable
 2010-11-07 14:26:24 +00:00
maralvira
83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00
maralvira
5e00219a9c Register definitions: get rid of some macro magic that doesn't help much 
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
 2010-11-07 14:24:11 +00:00
maralvira
091e4cd84e Add structure-based ITC access 2010-11-07 14:23:15 +00:00