Commit graph

998 commits

Author SHA1 Message Date
adamdunkels 3415ff26bd Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS 2009-04-10 00:39:19 +00:00
nvt-se 172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi b41b79e3a9 Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets). 2009-04-06 17:18:20 +00:00
nifi 900d8d8e17 changed to use HC01 compression for uip6 2009-04-06 16:01:11 +00:00
nifi 8b41f3a6a8 set rime addr size to 8 for uip6, restored clock resolution 2009-04-06 14:59:49 +00:00
nifi 76b7bf43d0 added setup for uip6 with 802.15.4 frames and routing using Rime 2009-04-06 14:12:58 +00:00
nifi a36e529df1 added configuration for panid 2009-04-06 13:31:00 +00:00
nvt-se f53560f6a5 enabled multihop routing, increased uip buffer size. 2009-04-06 13:23:14 +00:00
nifi c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
adamdunkels 58331e6802 Made tick resultion more fine-grained to support a shorter LPP listen time 2009-04-03 11:46:48 +00:00
fros4943 b730fb329d changed upload rules due to problems on linux platforms 2009-04-02 11:15:30 +00:00
fros4943 3b3580e439 disabled writing IP addresses from inside COOJA, since the these should rather be determined by Contiki 2009-04-01 18:11:48 +00:00
fros4943 aa736322e1 removed unused uip/uaodv cooja comm stack. mesh-uip should be used instead 2009-04-01 17:17:55 +00:00
fros4943 3665422d8d simplified cooja communication stacks initialization + added uipv6 stack 2009-04-01 13:50:12 +00:00
fros4943 6a99a82516 copied uipv6 configuration from native platform 2009-04-01 13:46:56 +00:00
fros4943 1c031504e5 no need to initialize serial line 2009-04-01 13:46:16 +00:00
fros4943 892bfb5678 moved radio-uip link functionality directly to comm stack sources 2009-04-01 13:45:41 +00:00
fros4943 eddd8350c5 renamed radio driver 2009-04-01 13:44:34 +00:00
fros4943 afed9bb2d0 icnlude packet radio by default 2009-04-01 13:39:54 +00:00
nifi c6b15c289e * show radio channel at startup
* only initialize timesynch when timesynch is enabled
2009-03-31 13:25:50 +00:00
nvt-se e90149b7b4 avoid switching mode when tx or rx is active.
based on suggestions from Frederik Hermans and some code from Jesper Karlsson.
2009-03-30 14:07:34 +00:00
fros4943 5f1fda0406 removed unused variables + writing serial data in timeevent 2009-03-26 16:23:47 +00:00
fros4943 dda6de8438 + clock stub functions 2009-03-26 16:22:36 +00:00
fros4943 ac22ad5081 changed the Makefile rules for uploading to sky-nodes.
the earlier approach caused problems sometimes, resulting in command succeeding without all nodes being reprogrammed
2009-03-26 13:29:44 +00:00
nvt-se 04bd414e1c enabled LPP by default. 2009-03-26 12:51:55 +00:00
nvt-se 90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
nvt-se 25cc327acc avoid hanging in TX mode after CCA check failed.
minor memory savings.
2009-03-25 15:25:05 +00:00
nvt-se 96fbf3b853 use old style C comments.
convert printf to PRINTF.
remove unnecessary MS_DELAY calls from setupTX and setupRX.
2009-03-24 15:32:26 +00:00
nvt-se 15c447e57e remove some unnecessary instructions and function calls. patch from Jesper Karlsson. 2009-03-24 15:13:11 +00:00
nvt-se 143c7f9cea switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
fros4943 c76f34ff98 minor serial test application update 2009-03-21 15:47:40 +00:00
fros4943 9c9165dc90 start cooja with more memory to avoid outofmemory problems when running mspsim-based simulations 2009-03-20 13:23:44 +00:00
nvt-se 6b22fa60e8 - avoid costly rx state initialization if the radio is already on.
- code formatting.
2009-03-19 14:43:31 +00:00
nvt-se 8f85355f02 print the MAC protocol name when starting the node 2009-03-19 14:14:06 +00:00
nvt-se b9ef907690 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
nvt-se 7e329ab467 removed obsolete file. 2009-03-17 22:20:04 +00:00
adamdunkels b1cd9c207a Removed serial.c, which is obsoleted by serial-line.c, which in turn now resides in Makefile.include 2009-03-17 21:51:13 +00:00
adamdunkels 727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels 0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
nvt-se 7f3def31b7 removed duplicate inclusion of header, and sorted the entries. 2009-03-17 15:02:19 +00:00
nvt-se 6d0fc26ec1 disabled unstable SD driver. 2009-03-17 15:01:40 +00:00
fros4943 d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels 65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
dak664 932fc9f748 Remove tab that was preventing cgi invokation 2009-03-12 21:37:22 +00:00
adamdunkels 5920a86312 Moved the Raven-specific applications from the generic apps/ directory to the platform-specific platform/avr-raven/apps 2009-03-12 19:15:23 +00:00
fros4943 99b9e80de9 make all quickstart target phony 2009-03-12 17:48:23 +00:00
fros4943 72fdf5b379 make quickstart goal precious 2009-03-12 15:12:50 +00:00
fros4943 063bf88f90 cooja quickstart should be started from normal cooja working directory, otherwise config relative paths won't work
+
cygwin path fix for quickstart
2009-03-12 13:04:10 +00:00
nvt-se 80bbc92ffe patch from Jesperk Karlsson. ensures that the fp_uart_handler type is known
in the header.
2009-03-12 12:23:22 +00:00
fros4943 5d27841807 + contiki app object 2009-03-11 08:40:37 +00:00
fros4943 bcb34297df reimplemented quickstart functionality 2009-03-11 07:45:54 +00:00
fros4943 0bc10750bc added rule for .cooja target.
compiling for cooja is now similar to other platforms, for example:
make hello-world.cooja TARGET=cooja
2009-03-10 21:23:38 +00:00
julienabeille 0395ff5f39 sicslowpan Typo 2009-03-09 08:19:07 +00:00
c_oflynn 41c19115d2 fix compiling ravenusb platform 2009-03-06 15:21:45 +00:00
adamdunkels 3848bba210 Added support for serial data input 2009-03-06 00:13:56 +00:00
adamdunkels 8afff893f1 Removed old \mainpage documentation to avoid confusion with the main \mainpage 2009-03-02 22:04:14 +00:00
fros4943 3774395c82 cfs example updated 2009-03-02 09:44:07 +00:00
fros4943 286065b584 cfs updated 2009-03-02 09:34:47 +00:00
adamdunkels e3043b1be2 Enable communication power accounting for xmac by default 2009-03-01 20:43:37 +00:00
adamdunkels ac9ab9c582 #include lib/random.h 2009-03-01 20:42:10 +00:00
nvt-se 47d70f2ae3 Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option. 2009-03-01 12:00:00 +00:00
nvt-se b47221672a switched cfs offset type to signed long to allow backward movements with cfs_seek. 2009-02-28 13:41:16 +00:00
fros4943 9c8c4898f7 updating cooja cfs stubs according to recent commits 2009-02-27 16:06:25 +00:00
nvt-se 9f8f773b43 use unsigned long as cfs offset type. 2009-02-27 14:53:15 +00:00
oliverschmidt 03e7eb2535 Fixed comment (just to make sure that committing still works after all these months). 2009-02-27 07:57:13 +00:00
nvt-se 9b548619ed removed redundant definitions. 2009-02-25 23:57:13 +00:00
adamdunkels d761dfebd1 Bugfix: reduced the size of the uIP buffer to account for MAC header space 2009-02-25 10:23:03 +00:00
nvt-se c148e2e7ea Do not include codeprop.h by default. 2009-02-23 14:44:26 +00:00
nifi 0db6403c5d removed unnecessary reference to codeprop.h 2009-02-21 11:23:54 +00:00
adamdunkels 7781bbea58 Enabled X-MAC announcements by default, disabled polite broadcast announcements by default 2009-02-14 22:52:24 +00:00
adamdunkels 585620c102 Reverted the recent change from random_rand() to rand(). It turned out that
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
fros4943 f1fc4c879f cfs_coffee_get_fd_set() was renamed 2009-02-09 10:09:13 +00:00
nvt-se d0a546b049 A long refactoring session yielded the following.
Technical changes:

* Factored out file specific information from the file descriptor
  structure into a new file structure.

  - Useful file metadata can be stored after the file is closed.
  - File descriptors become much smaller.
  - Significantly reduces the need to scan for the file end.

* Use correct types in all function signatures.
* Removed the directory cache.

Results:

* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels 440899e4cb Seed rand() with the node ID + MAC address 2009-02-07 16:49:36 +00:00
adamdunkels 5cf0c25ca6 A few more minor fixes 2009-02-04 20:58:05 +00:00
adamdunkels 96882c402a Fixed conformance to Contiki code style :) 2009-02-04 20:55:41 +00:00
joxe 9689a579be added DCO/CPU speed re-synch each 30 seconds 2009-02-04 19:32:20 +00:00
fros4943 c16921f108 checkpointing library implemented for the sky platform (cfs interface is currently not optimized) 2009-02-04 17:51:49 +00:00
zhitao 5789bf5596 Modified comments for receiver filter bandwidth settings 2009-02-02 08:52:49 +00:00
joxe e5f0d786a8 fixed sky platform to use the new uart1_active api to avoid messing up last chars transmitted 2009-01-31 12:45:03 +00:00
fros4943 603740b13b removed compiler warning by returning 0 at undefined value 2009-01-23 17:08:17 +00:00
fros4943 ebcaf8eec8 removed compilation warning due to unused is_gateway variable (outside uIP mode) 2009-01-19 13:44:04 +00:00
adamdunkels e70b45c102 Updated to make use of the tmote-bsl instead of msp430-bsl (needed for the Sentilla JCreate) if it exists 2009-01-15 22:12:46 +00:00
adamdunkels 29fe3d8741 Added acc-sensor.c, dDriver for the acceleromenter sensors on the Sentilla JCreate board 2009-01-15 21:07:03 +00:00
adamdunkels 9f0006fde0 Driver for the acceleromenter sensors on the JCreate board 2009-01-15 21:06:02 +00:00
fros4943 5f3c1a0e12 elfloader executing loaded programs from ram (not rom) by default on msp430 platforms. 2009-01-15 09:04:04 +00:00
joxe d2dc732435 changed list_pop to return removed element 2008-12-16 09:59:42 +00:00
c_oflynn 5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
zhitao a50d5b701e direct the UART input stream to the default Contiki serial process 2008-12-09 15:56:39 +00:00
nvt-se 79d4d22ee7 replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
fros4943 0ab57730f8 removed reference to the removed u16 rime address field 2008-12-01 13:20:51 +00:00
c_oflynn 9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
fros4943 6150d13254 support for contiki-node simulation on 64-bit architectures (contributed by Jesper Karlsson and David Gustafsson) 2008-11-28 16:41:26 +00:00
zhitao 6b33cf434f bug fix: using memcpy() to append CRC checksum to odd-size payload caused memory corruption, use individual byte assignments instead 2008-11-25 16:05:22 +00:00
joxe 55280131fc added printout of MAC protocol name 2008-11-24 14:31:08 +00:00
fros4943 720357bc60 added log_message() implementation 2008-11-21 10:35:46 +00:00
c_oflynn 8bae6890a8 Changes by "David Kopf" <dak664@embarqmail.com> to:
-Add hit counter to index.html
 -Adding link to favicon.png
 -Fix serving of binary (image) files in avr-makefsdata file

Changes by Colin O'Flynn:
 -Removed extra linebreak in tutorial-raven.txt
 -Fix to contiki-conf.h in avr-rcb platform
2008-11-18 22:03:12 +00:00
oliverschmidt 7cf3165155 Replaced NETSIM macro with general (and now actually working) solution in Makefile.include. 2008-11-17 22:52:10 +00:00
oliverschmidt 7ac49a573b Reverted recent change as there's now a general (and actually working) solution in Makefile.include. 2008-11-17 22:40:10 +00:00