harald42
f2af0c7329
change default channel from 26 to 25
2016-03-16 15:00:46 +01:00
Harald Pichler
daf2191555
add arduino folder
2016-02-27 22:13:12 +01:00
harald42
7d8254bd81
use uint32 for clock time
2016-02-25 09:32:21 +01:00
harald42
b462052bf5
CRLF will be replaced by LF
2016-02-25 08:20:41 +01:00
harald42
98e4451518
Merge branch 'contiki' into osd
2016-02-25 08:18:55 +01:00
Ralf Schlatterbeck
de6477efa8
Fix run.sh scripts to use jumptable of bootloader
...
Otherwise a crash results with a bootloader compiled with a newer AVR
toolchain (e.g. Debian Jessie). If you still have an ages-old bootloader
without a jump-table, as a short-term measure you can revert this change
in your run.sh. As a long-term fix we recommend you get your bootloader
updated!
2016-02-19 17:32:09 +01:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Simon Duquennoy
ebdc536d61
Merge pull request #1496 from simonduq/pr/jn516x-serial-input
...
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Simon Duquennoy
f87f7e7edd
jn516x enable serial input whenever there is no fallback interface
2016-02-03 17:53:29 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Nicolas Tsiftes
eef96f3ba7
Merge pull request #1480 from mdlemay/revise-clang-flags
...
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Simon Duquennoy
7c3108bf3b
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 13:36:18 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Michael LeMay
6557194fc5
galileo: Revise include flags for LLVM Clang
...
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00
Antonio Lignan
d4251d7c3b
Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
...
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou
9e9e6d07b0
Adjust READMEs to point explicitly to the arm-gcc version used by travis
2016-01-24 13:59:19 +00:00
Antonio Lignan
9a5682b75b
Merge pull request #1476 from alignan/pull/update-weather-meter
...
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan
246b01095f
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-23 15:52:29 +01:00
Antonio Lignan
66ebca3ade
Updated to new adc-zoul renaming
2016-01-23 15:42:13 +01:00
Antonio Lignan
9a80c0098f
Added zero-calibration function and added offset values to the structure
2016-01-22 16:58:46 +01:00
Antonio Lignan
426fa24e50
Clear interrupt and trigger callback if new data is generated
2016-01-22 16:58:46 +01:00
Antonio Lignan
f5b52e8094
Ported Grove's 3-axis gyroscope sensor (based on ITG-3200)
2016-01-22 16:58:46 +01:00
Antonio Lignan
6351462e89
Unified BMP180 and BMP085 drivers
2016-01-22 16:11:49 +01:00
Antonio Lignan
ec45369d1b
Merge pull request #1466 from alignan/pull/weather-meter
...
Add driver for the Sparkfun Weather meter station
2016-01-22 15:18:14 +01:00
Adam Dunkels
7128a6a178
Merge pull request #1258 from joakimeriksson/multiple-reassembly-fix
...
6LoWPAN - multiple reassembly fix and cleanup
2016-01-22 07:15:18 +01:00
Antonio Lignan
98ed8a29a0
Removed harsh restriction on mask values and disabled debug flags
2016-01-19 22:28:09 +01:00
Antonio Lignan
a6c30b4e09
Fixed missing static keyword in both zoul-demo and weather meter driver
2016-01-19 22:24:53 +01:00
Antonio Lignan
366f11d5df
Uncrustified weather meter driver and example
2016-01-19 18:03:16 +01:00
Antonio Lignan
81bec49a40
Changed fixed 2 minute integration period to allow overriding
2016-01-19 18:00:18 +01:00
Antonio Lignan
0902e0fc6d
Added degree converted value for the wind vane sensor.
...
Also added a 2-minutes average wind direction value, replaced the 240 bytes buffer from the reference example, but probably there's room for efficiency improvement
2016-01-19 17:47:46 +01:00
Antonio Lignan
61f1516369
Reworked instant wind speed calculation and extended the available wind speed return values
2016-01-19 17:47:46 +01:00
Antonio Lignan
0cb80b0605
Prevent calculations if tick is zero
2016-01-19 17:47:46 +01:00
Antonio Lignan
aacbcd904f
Added interrupt configuration for the weather meter
2016-01-19 17:47:46 +01:00
Antonio Lignan
103911f619
Added driver for the Sparkfun's weather meter station
2016-01-19 17:47:46 +01:00
Joakim Eriksson
d4dc45e096
updated sicslowpan documentation and platform configurations
2016-01-19 15:27:14 +01:00
Antonio Lignan
2295ecdbd9
Renamed adc-sensors/adc-wrapper to adc-zoul/adc-sensors, to have a better wording reflecting the intented use
2016-01-17 23:04:34 +01:00
Antonio Lignan
503abb4415
ADC wrapper for the Zoul-based platforms, allows to add analogue sensors over the existing adc interface
2016-01-17 22:40:06 +01:00
Antonio Lignan
ac07e848b7
Minor fixes to file descriptions and disable DEBUG switches
2016-01-17 21:52:34 +01:00
Antonio Lignan
2bb7ac9cc0
Merge pull request #1451 from g-oikonomou/bugfix/sensortag/select
...
Rename select() in various sensortag sensor drivers
2016-01-17 00:08:37 +01:00
