Enric M. Calvo
701a42e239
Added dummy light driver. Now skywebsense likes Z1
...
The light sensor driver is mapped to the same pin as the potentiometer
in Z1 Starter Platform. sky-websense is untouched, though.
2011-02-27 21:28:25 +01:00
Enric M. Calvo
414d926966
Sky-websense compiles for Z1 (testing)
2011-02-27 20:10:09 +01:00
Mariano Alvira
ea527da162
don't do a hard override of platform config in rpl project config
2011-02-08 09:21:16 -05:00
joxe
db0423af20
added response to Mac addr request and added addrs in printout
2011-01-17 20:05:51 +00:00
joxe
d7712b27d0
added undef of putchar for platforms where it is a macro
2011-01-14 17:57:48 +00:00
joxe
a920b73903
fixed Makefile to work with platform other than sky
2010-11-07 18:32:55 +00:00
adamdunkels
46ce00c173
Even out the transmissions during the interval
2010-11-06 11:55:15 +00:00
adamdunkels
1bf044f2c4
Moved project-conf.h
2010-11-03 15:46:41 +00:00
adamdunkels
5444581739
Data collection over RPL/IPv6
2010-11-03 15:36:38 +00:00
adamdunkels
39cfd156b2
Bugfix: avoid sending bogus data over the radio when no prefix is set; bug reported by mathieupouillot
2010-11-03 07:53:12 +00:00
joxe
aefd88c110
moved config file
2010-10-21 18:23:44 +00:00
adamdunkels
5585d72c86
A simple but substantial change: uIP used the htons()/HTONS() macro
...
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.
This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
joxe
71d5c5f3c1
removed servreg_hack from the rpl-udp example
2010-10-18 13:43:41 +00:00
nvt-se
072f208a29
Removed unused variable.
2010-09-15 15:55:08 +00:00
joxe
a36ea1f506
fixed compilation bug
2010-08-31 20:05:44 +00:00
oliverschmidt
a5dff5e08a
Up to now the root of the webserver filesystem was always the current directory. Now an optional file 'wwwroot.cfg' is read. If present its content is used as prefix in the conversion of http paths to local paths. This prefix may be a relative path as well as an absolute path.
...
This is especially useful for the cc65-based targets as it ain't possible there to "just change into the wwwroot directory and start the webserver using its pathname".
2010-08-30 19:44:38 +00:00
joxe
a72252cbd8
removed forced configuration of number of routes and neigbors
2010-08-24 17:54:56 +00:00
adamdunkels
12a1ad2e7d
Add the servreg-hack app to the Makefile
2010-06-15 19:02:40 +00:00
adamdunkels
237398a74b
Rewrote the code to use the servreg-hack module, so that clients can look up the IP address of the collector node.
2010-06-15 19:02:00 +00:00
adamdunkels
951fd78f6c
ctimer moved from net/rime to sys/
2010-06-14 18:58:45 +00:00
nvt-se
6eadf2522f
ctimer.h moved
2010-06-14 16:19:45 +00:00
nifi
f8078ae277
Renamed wget() to wget_get() and added server port as argument
2010-06-14 14:12:43 +00:00
adamdunkels
59f5284248
Increase the size of the route and neighbor tables
2010-06-14 07:03:53 +00:00
nifi
b21d2494bc
Added example using HTTP to control and be controlled.
2010-06-08 22:39:30 +00:00
nifi
53d637a2bc
added missing include
2010-06-08 19:53:49 +00:00
nifi
f51e3a4f1e
minor cleanup
2010-06-08 13:27:06 +00:00
nifi
3c3f3a532d
Added web pages "/1" and "/0" to turn leds on or off
2010-06-08 12:34:43 +00:00
nvt-se
a9498df8f5
rpl_get_dag is no longer needed since rpl_set_root returns the dag pointer.
2010-06-03 15:24:13 +00:00
joxe
df104b77a3
updated with support for getting prefix from tunslip6 and for setting RPL prefix
2010-05-25 20:34:51 +00:00
joxe
293f08e9c7
added support for experimental RPL prefix based autoconf
2010-05-25 20:19:16 +00:00
nvt-se
e4bcc8a35e
reduced the width of the Log Listener window
2010-05-25 15:29:04 +00:00
nvt-se
07a2179953
simplified
2010-05-24 15:43:18 +00:00
nvt-se
dbd710626a
Added optional server replies.
2010-05-21 13:45:50 +00:00
nvt-se
64d703a67e
Use the new Mote Attributes interface.
2010-05-21 13:45:04 +00:00
nifi
a9aacac63a
Fixed to set address on interface
2010-05-20 11:27:14 +00:00
nifi
86879f66ac
removed internal make targets
2010-05-18 17:05:45 +00:00
nifi
e268b094d4
Fixed to only show used address entries at startup and removed hack to make address 'final'
2010-05-10 15:15:17 +00:00
nifi
2104fd595f
added nexthop to the route table listing
2010-05-10 14:25:02 +00:00
nifi
27160b91a7
Added rules to connect to slip bridge connected via serial or running in COOJA using tunslip6
2010-05-10 14:19:16 +00:00
nifi
1696e9f70f
Added documentation
2010-05-09 15:57:34 +00:00
nifi
09424f02cb
Added example COOJA simulation
2010-05-09 14:31:33 +00:00
nifi
7b4f099a7f
Added rules to connect to slip bridge connected via serial or running in COOJA using tunslip6
2010-05-09 14:31:09 +00:00
nifi
d2f5923dbc
corrected comment
2010-05-09 13:29:33 +00:00
nifi
9bb168040c
Web server example showing light and temperature sensor data
2010-05-09 12:56:48 +00:00
nifi
8c49cf26e5
Added simple web server listing the neighbors and routes
2010-05-09 12:52:05 +00:00
nifi
52f27ea1cb
reduced the buffers to save memory
2010-05-05 21:54:41 +00:00
nifi
ad450e18a7
added project configuration
2010-05-05 21:12:56 +00:00
joxe
efc8ef760d
added very basic rpl-border router example
2010-05-05 19:44:30 +00:00
joxe
b54f410bc8
minor cleanup
2010-05-04 14:40:52 +00:00
nvt-se
d751238747
Added an example of using UDP over an RPL-enabled IPv6 network
2010-04-30 15:52:48 +00:00
