Commit graph

1459 commits

Author SHA1 Message Date
Benoît Thébaudeau ee3ee049e4 cc2538: Set the entry point to the CCA
No entry point was defined, so it defaulted to the beginning of the
.text output section where the vector table is located by default in
Contiki. Actually, the vector table may be located elsewhere, and the
ROM-based boot loader first reads the CCA to find the vector table.

Consequently, this commit sets the entry point to the CCA, which fixes
both the entry point and the initial symbol reference, so this commit
also removes the now-unneeded "__used__" and "KEEP" keywords from the
CCA.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:34 +01:00
Benoît Thébaudeau 96dd24836c cc2538: Use &vectors instead of flash/.text start address
The current CC2538 linker script in Contiki places the vector table at
the beginning of the flash memory / .text output section. However, this
location is arbitrary (the only requirement is that the vector table is
512-byte aligned), and custom linker scripts may be used with Contiki,
which means that Contiki may be used with a vector table placed
elsewhere. Thus, using the flash/.text start address in the CCA and as
the default NVIC VTABLE value was wrong.

This commit rather uses the address of the vectors[] array from
startup-gcc.c, which makes it possible to freely move around the vector
table without breaking anything or having to use a custom startup-gcc.c
and to configure the NVIC driver for that. Moreover, referencing the
vectors[] array naturally prevents it and its input section from being
garbage-collected by the linker, so this commit also removes the
now-unneeded "used" and "KEEP" keywords from the vector table.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:33 +01:00
Benoît Thébaudeau a191fcdb84 cc2538: nvic: Simplify VTABLE configuration
The only thing needed for VTABLE is the absolute address of the vector
table. Splitting it between code/SRAM base and offset complicates things
and brings nothing.

Consequently, this commit merges the NVIC VTABLE configurations into a
single one giving the vector table absolute address.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:33 +01:00
Benoît Thébaudeau efb4b858e2 cc2538: Define the flash memory organization
Define the flash memory page and word sizes. These definitions are
grouped with the flash lock bit page and CCA definitions, so flash-cca.h
is renamed to flash.h.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:33 +01:00
Benoît Thébaudeau 790c253d6d cc2538: Define and use device features
Define the available CC2538 devices and their features, and use them to
define the linker script memory regions. The .nrdata output section is
now always defined in order to trigger an error if it is used but no
memory is available for it. The CC2538 device used by Contiki is made a
configuration option, the CC2538SF53 device being the default.

This makes more sense than defining the flash memory address and size as
configuration options like previously, all the more not all values are
possible and all the features are linked by each device.

This change also makes it possible to:
 - use the correct SRAM parameters for the CC2538NF11,
 - know at build time if the AES, SHA, ECC and RSA hardware features are
   available on the selected CC2538 device.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-11-19 01:18:33 +01:00
Tommy Sparber 938a425949 Cleanup trailing spaces and convert tabs to spaces
This commit removes trailing spaces and converts
tabs to spaces in all files affected by fix-doxygen PR.
2015-11-18 11:09:43 +11:00
Tommy Sparber 938d17576b doxygen: Fix many warnings
This commit fixes nearly all of the reported doxygen warnings.

I tried to not clutter the log with removed trailing spaces.
Removed whitespace and converted tab/spaces for all files affected by this commit
are in a separate branch.
2015-11-18 11:07:58 +11:00
suman_panchal 8d139222f6 Wismote : Direct memory access using UART. 2015-11-17 20:26:43 +05:30
George Oikonomou b4393e861f Only set CC13xx prop mode channel if a new channel is being requested 2015-11-14 01:38:24 +01:00
George Oikonomou 320a753666 Turn CC13xx RF back off after prop TX if it was off to start with 2015-11-14 01:38:24 +01:00
George Oikonomou e0e20aa3fd Turn off ENERGEST_TYPE_LISTEN in CC13xx prop mode off() 2015-11-14 01:38:24 +01:00
Marco Grella 41f9ca08e2 Merge with updated master. 2015-11-11 13:42:35 +01:00
Simon Duquennoy fbd78a7e3b Merge pull request #1293 from simonduq/pr/fix-warnings
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
George Oikonomou a63efe947f Merge pull request #1233 from adamdunkels/pr/26xx-13xx-fixes
CC26xx/CC13xx fixes
2015-11-09 08:33:58 +00:00
George Oikonomou 3aa4547327 Merge pull request #1257 from bkozak-scanimetrics/cc26xx_fully_turnoff_radio
CC26xx - fully shutdown the rf-core & abort rx op
2015-11-04 15:45:05 +00:00
Antonio Lignan 6037e269a8 Merge pull request #1336 from sumanpanchal/z1-uart0-dma
Zolertia Z1: Direct memory access using UART.
2015-11-02 08:47:08 +01:00
George Oikonomou 54648591ee Explicitly send CMD_ABORT in prop mode before powering down 2015-11-01 22:53:35 +00:00
Oliver Schmidt 9962d0720a Merge pull request #1347 from oliverschmidt/master
Removed CC_FASTCALL.
2015-11-01 19:36:07 +01:00
Oliver Schmidt 1639b712bb Removed CC_FASTCALL.
CC_FASTCALL was introduced many years ago for the cc65 tool chain. It was never used for another tool chain. With a798b1d648 the cc65 tool chain doesn't need CC_FASTCALL anymore.
2015-11-01 18:10:17 +01:00
Oliver Schmidt 692fbf5422 Merge pull request #1343 from oliverschmidt/master
Added 80 column IRC client / web browser for the C64.
2015-10-31 15:18:10 +01:00
suman_panchal 35cc40563e Zolertia Z1: Direct memory access using UART. 2015-10-31 11:45:13 +05:30
Oliver Schmidt fb5d0b7ef0 Made 80 column display a cc65 application attribute.
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
George Oikonomou 3e0f37090c Merge pull request #1324 from msloth/master
Remove LED fade in lpm.c
2015-10-29 11:36:39 +00:00
Marcus Linderoth 1906bff17c allow lpm_shutdown without a wake-up pin set 2015-10-28 11:06:26 +01:00
Marcus Linderoth ea7a5d1c63 Remove fade away of LED when going into shutdown mode; it consumes power and is application-layer stuff. 2015-10-28 10:51:37 +01:00
Benoît Thébaudeau bf41de1be5 Merge pull request #1078 from drandreas/cc2538-crypto
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
Simon Duquennoy 2daa3d7377 Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
Simon Duquennoy ca8fe618e7 cc2420 and cc2430: add comment on why we discard tbiv 2015-10-20 10:11:49 +02:00
Simon Duquennoy f49b161795 Remove commented-out code 2015-10-20 10:11:47 +02:00
Adam Dunkels d48cf89e9b Fixed compiler warnings for the AVR platforms 2015-10-20 10:11:42 +02:00
George Oikonomou 2773a37857 Update CCxxwares to our warning-free version 2015-10-20 10:11:41 +02:00
Adam Dunkels 24b1eb4031 The -pedantic and -stdc flags trigger a few too many warnings 2015-10-20 10:11:35 +02:00
Adam Dunkels 4cab313b8c Fix compiler warnings 2015-10-20 10:11:34 +02:00
Adam Dunkels 06dfce6d46 The -pedantic and -stdc flags trigger a few too many warnings 2015-10-20 10:11:33 +02:00
Adam Dunkels 12a185f394 Added the WERROR=1 flag to the CC2538 and CC26xx CPUs 2015-10-20 10:11:23 +02:00
Simon Duquennoy a2b1934f03 mbxxx: added missing undefs 2015-10-20 09:37:28 +02:00
Simon Duquennoy ccfdf80ff2 Removed mbxxx warning messages on the current ld file in use 2015-10-20 09:37:27 +02:00
Simon Duquennoy 0340567af8 tapdev6.c: do not ignore return value of system() 2015-10-20 09:37:18 +02:00
Simon Duquennoy 2c91ab6fad linuxradio-drv.c: added missing include 2015-10-20 09:37:17 +02:00
Simon Duquennoy 01984f07c2 cc2420 and cc2430: removed compiler warning on unused tbiv 2015-10-20 09:37:16 +02:00
Simon Duquennoy 560d6af97b msp430x: do not compile mtarch, which currently assumes 16-bit function pointers 2015-10-20 09:37:15 +02:00
AntiCat d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
Marco Grella fc65757114 License headers and code style fixes. 2015-10-09 19:40:39 +02:00
Vladimir Pouzanov 2d75926989 Fixed linuxradio-drv guard macro name 2015-09-29 12:29:08 +01:00
Simon Duquennoy 6d4f50e53a Merge pull request #1282 from farcaller/nativenet
Basic NETSTACK_CONF_RADIO based on kernel 802.15.4
2015-09-28 19:30:38 +02:00
Mariano Alvira ff7129dc53 Merge pull request #881 from drugo72/avr-fixes
Avr fixes
2015-09-28 09:41:21 -05:00
Vladimir Pouzanov bd1b7d9814 Fixed linuxradio compilation issues with native and minimal-net 2015-09-28 12:48:01 +01:00
Vladimir Pouzanov 4c8618e6ba Extracted linuxradio device name to contiki-conf 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov 52c90519d9 Fixed missing #includes and restricted linuxradiodrv compilation to linux 2015-09-28 12:48:00 +01:00
Vladimir Pouzanov 43a327df5a Cleaned up and re-formatted source of linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov 113d9761f7 Better failure handling in linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov 5fed4a3f1c Using MAX_PACKET_SIZE where appropriate in linuxradiodrv 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov beef4f5d5d Added better error handling to linuxradiodrv transmit() 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov 8a068f8512 Cleaned up linuxradiodrv code 2015-09-28 12:47:12 +01:00
Vladimir Pouzanov 867368b929 Basic NETSTACK_CONF_RADIO based on kernel 802.15.4 2015-09-28 12:47:11 +01:00
Laurent Deru a58fa16cc6 Merge pull request #1252 from tadodotcom/cpu-native-ldflags-fix
Don't override LDFLAGS on Linux for the native CPU
2015-09-23 09:44:22 +02:00
Cristiano De Alti e51783a1d5 Most of the rules in the avr makefile are not used anymore
and should be removed. In the meantime we change those needed
to upload flash and eeprom to depend on the default contiki rule
to make the .$(TARGET) executable."
2015-09-22 23:32:17 +02:00
Billy Kozak 8e5f0bc36a Defining gcc specific macros in seperate header 2015-09-22 14:17:10 -06:00
Víctor Ariño 561e70b18e Updated current fallback_interface(s) to return int. 2015-09-22 12:53:04 +02:00
Billy Kozak 324d03b53c CC26xx - fully shutdown the rf-core & abort rx op
Prior to this patch, the ieee radio driver did not explicitly abort
the rx operation or power down the analog components of the radio
prior to shutting down the rf-core.

The result of this was that the rf-core continued to use a lot of
power even while "off".

This patch fixes this problem.
2015-09-14 13:18:01 -06:00
Mariano Alvira 552408b241 Merge pull request #685 from SmallLars/mc1322x
Added mc1322x functions: clock_set_seconds, soft_reset, nvm_verify
2015-09-13 12:35:53 -05:00
Mariano Alvira 1ddcdf4886 Merge pull request #839 from gebart/rf230-isr
rf230bb: Handle all IRQ flags in one ISR call. (Q: Is the current ISR valid?)
2015-09-13 12:06:36 -05:00
Mariano Alvira 050275293a Merge pull request #922 from atiselsts/rs230bb_fixes
Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read()
2015-09-13 11:58:16 -05:00
Marco Grella 87970a88a4 Comments and documentation fixes. 2015-09-10 14:28:08 +02:00
Valentin Sawadski b729dc8985 Don't override LDFLAGS on Linux for the native CPU 2015-09-10 11:13:22 +02:00
Nicolas Tsiftes 8a7e2e5892 Merge pull request #1240 from atiselsts/energest_accuracy
Improve energest accuracy
2015-09-07 15:35:35 +02:00
George Oikonomou dd640cd229 Merge pull request #1195 from bkozak-scanimetrics/cc26xx_improve_watchdog
CC26xx - various fixes and improvements for the watchdog module
2015-09-04 17:20:50 +01:00
Marco Grella 17aafb9daa Align to current master 2015-09-04 17:01:04 +02:00
Atis Elsts 2f79810b58 Use ENERGEST_SWITCH to switch between different power modes to improve energest accuracy. 2015-09-04 11:46:00 +02:00
Billy Kozak b71353181d CC26xx - enable correct IRQ in rf_core_cmd_done_en
Fix for #1229

rf_core_cmd_done_en() was enabling the wrong irq for detecting the
completion of foreground operations. This was causing cc26xx devices
to not wake-up on time when calling lpm_sleep() from transmit().
2015-09-02 12:37:33 -06:00
Adam Dunkels 8d2dafbe30 No need to set the same channel again 2015-09-02 12:18:27 +02:00
Adam Dunkels 27e373492d Turn off energest listen in off() 2015-09-02 12:10:44 +02:00
Adam Dunkels f1c4a5ee08 Turn off radio again after transmitting 2015-09-02 12:10:07 +02:00
Adam Dunkels 8bcde2e40f Tickless bugfixes:
* The clock interrupt must be scheduled relative to the last interrupt, not relative to the current time (which may have progressed significantly)
* clock_time() must increase continuously, so that code that may be spinning around clock_time() will make progress, not only after each interrupt
2015-09-02 12:05:47 +02:00
Billy Kozak fde3202a3f cc26xx - added optional locking mode for WDT
Added a mode, configurable by the CONTIKI_WATCHDOG_CONF_LOCK_BETWEEN_USE
macro, which locks the WDT register between uses so as to prevent
any accidental modifications
2015-08-31 09:12:16 -06:00
Billy Kozak 22d8a8dd56 cc26xx - implemented watchdog_stop
Also modified watchdog_start so that if we stop and start again the
watchdog timeout will be reset (by calling watchdog_periodic).
2015-08-31 09:12:16 -06:00
Billy Kozak dfdb0a6487 cc26xx - fixed WDT reloading
According to the TRM, the WDT does not produce a reset until it
expires twice. After expiring the WDT will set the INT flag if it
is unset, and reset the MCU if INT is already set.

Before this patch, watchdog_periodic() only un-sets the INT flag. This
means that the behaviour of watchdog_periodic is underministic in that
the value of the countdown timer will be different depending on
when the function was called.

This patch fixes this behaviour by also reloading the timout value.
2015-08-31 09:10:26 -06:00
Billy Kozak 85555cf6cf Made cc26xx WDT reload configurable with macro
CONTIKI_WATCHDOG_TIMER_TOP sets the reload value of the WDT
2015-08-31 09:10:26 -06:00
Atis Elsts 854494109d Atmel 230bb: always increase the rx frame ringbuffer cursor in rf230_read().
Avoids packet reordering in cases when RF230_CONF_RX_BUFFERS > 1.
2015-08-31 09:56:56 +02:00
Antonio Lignan 37470bbc1b Merge pull request #1055 from sumanpanchal/msp430x-elfloader
Added MSP430x ELFLOADER support to load image with large memory model.
2015-08-27 21:19:27 +02:00
Adam Dunkels bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Jonas Olsson 01e36532c2 Add support for the CC13xx CPU
This commit:

* Moves all cpu files from cpu/cc26xx to cpu/cc26xx-cc13xx
* Bumps the CC26xxware submodule to the latest TI release
* Adds CC13xxware as a submodule
* Adds support for sub-ghz mode / IEEE 802.15.4g
* Splits the driver into multiple files for clarity. We now have the following structure:
  * A common module that handles access to the RF core, interrupts etc
  * A module that takes care of BLE functionality
  * A netstack radio driver for IEEE mode (2.4GHz)
  * A netstack radio driver for PROP mode (sub-ghz - multiple bands)

This commit also adds tick suppression functionality, applicable to all chips of the CC26xx and CC13xx families. Instead waking up on every clock tick simply to increment our software counter, we now only wake up just in time to service the next scheduled etimer. ContikiMAC-triggered wakeups are unaffected.

Laslty, this commit also applies a number of minor changes:
* Addition of missing includes
* Removal of stub functions
* Removal of a woraround for a CC26xxware bug that has now been fixed
2015-08-23 19:54:42 +01:00
Billy Kozak feec05cdf2 CC26xx - fix misuse of len variable in read_frame
read_frame was misuing the packet length in the following ways:
- returning non-zero even if buf_len is too short for the packet
- truncating the length to buf_len if len is too long then using the
  truncated (i.e. wrong) length to index into the buffer
- memcpying too many bytes (used buf_len instead of real length)

This commit fixes all of this and adds some code to report
on packet length errors (to match with cc2538 driver).
2015-08-14 12:44:55 -06:00
Billy Kozak ceb24f656e Improved style of read_frame
- moved variable declaration to top of function in accordance with the
  Contiki style guide
- made function flatter, reduced nesting to improve readability
2015-08-14 12:43:34 -06:00
Billy Kozak 547f8e7aaa Fixed race condition with rf cpu in read_frame
Fixed a race condition that could occur in read_frame because the
dataEntry is set to PENDING before we are finished reading from it.
2015-08-14 12:42:10 -06:00
Fabien Castanier 49b24e6f53 Modified the parameter name of clock_wait function 2015-08-05 13:59:08 +02:00
Oliver Schmidt 5f6a672e23 Merge pull request #1184 from oliverschmidt/master
Adjusted retro target clock to "new" DNS resolver.
2015-08-04 15:39:18 +02:00
Oliver Schmidt ca2552461e Adjusted retro target clock to "new" DNS resolver.
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
2015-08-04 13:48:08 +02:00
George Oikonomou 195ada6668 Merge pull request #1107 from phoenix-frozen/cc2530-rf-const-warning
fix minor warning in cc2530-rf driver
2015-08-03 10:28:43 +01:00
Marco Grella 62c33260bd Modified structure to use a sub-module for platform APIs 2015-07-31 17:11:27 +02:00
Marco Grella b61152bfa1 I/O libraries 2015-07-24 19:54:05 +02:00
Marco Grella 86f35536a4 Added new stm32nucleo-spirit1 platform 2015-07-24 16:30:10 +02:00
Billy Kozak 35919f6836 CC26xx - Enable RX_NOK on DEBUG builds
Enabled the RX_NOK interrupt, if DEBUG or CC26XX_DEBUG_CRC are set
true, for the purpose of monitoring packets with bad CRC
2015-07-20 10:47:06 -06:00
Billy Kozak 99d74e949f CC26xx autoflush bad crc packets
Setting bAutoFlushCrc=1 so that the radio co-processor will
automatically drop packets with bad crc.
2015-07-16 08:58:24 -06:00
Oliver Schmidt ca50a2c6df Merge pull request #1157 from oliverschmidt/master
Allow fixup to be repeated.
2015-07-09 23:31:00 +02:00
Oliver Schmidt f348f4feb2 Allow fixup to be repeated.
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable.

Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
2015-07-09 22:43:16 +02:00
Billy Kozak b7565f3930 turned on correlator in radio packet filter
Enabling this option seems to greatly improve transciever performance with
Contikimac. This seems to happen because Contikimac CCAs are much less likely
to detect false positives (thus screwing up the CCA sequence).
2015-07-06 16:28:40 -06:00
Antonio Lignan 8cc0a12a9f Merge pull request #1097 from bthebaudeau/cc2538-examples-fix-warnings
cc2538: examples: Fix build warnings
2015-06-24 11:39:24 +02:00
Oliver Schmidt 08be27b602 Merge pull request #1139 from oliverschmidt/master
Several minor retrocomputing configuration changes.
2015-06-22 07:59:25 +02:00
Oliver Schmidt fc9d38caba Reduced default for number of connections.
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00