David Kopf
745f071c98
Eliminate unused variable warnings. Dummy test of PT_YIELD_FLAG does not change program size.
2012-02-21 11:23:54 -05:00
Niclas Finne
9d261eec56
Use NETSTACK_RDC_* instead of NETSTACK_CONF_RDC_*
2012-01-09 18:06:30 +01:00
Adam Dunkels
f88a1e394b
Made collect retransmissions and broadcast announcements timers depend on the rdc wakeup rate
2011-12-09 08:18:22 +01:00
Niclas Finne
154f971b2b
collect_send() should return 0 if the packet could not be enqueued to be sent
2011-06-07 19:45:41 +02:00
adamdunkels
4b4b8fad56
More recent packet entries. Allow 4 queue entries to be dedicated to generated packets.
2011-01-18 16:05:53 +00:00
adamdunkels
81d23a3a36
Minor bugfixes pertaining to queue handling: if a packet was explicitly dropped, the packet would later be acknowledged despite it never being received; added a limit on how many queue entries that can be used for packets that are being forwarded, to allow for originated packets even if the forwarding queue is filled.
2011-01-10 15:10:43 +00:00
adamdunkels
148bd60fe1
Bugfix: the defensive retransmission timer setting must be made before the packet is transmitted, otherwise the retransmission timer will always be for the defensive retransmit
2011-01-09 23:49:27 +00:00
adamdunkels
4e91d9303e
Added safeguard timer if the MAC layer would fail to call back after transmission.
2011-01-09 21:13:20 +00:00
dak664
322d835fee
Fix avr-gcc compiler warnings
2010-12-18 22:12:53 +00:00
adamdunkels
19e930e6f2
Changed the behaviour of retransmissions to work better with the in-order CSMA code. The retransmission timer is now set when the packet is known to be sent by the MAC layer.
2010-12-16 22:45:15 +00:00
dak664
240d478c1f
Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME
2010-12-14 22:14:33 +00:00
adamdunkels
8f745a6ea6
Added a function for obtaining the current parent
2010-11-06 14:32:10 +00:00
adamdunkels
677575fc8c
Rewrote proactive link estimator to be invoked randomly instead of triggered by an empty queue; this makes network bootups because nodes are not synchronized
2010-10-28 15:36:02 +00:00
adamdunkels
9ecc0437f4
Left-over debug printf removed
2010-10-25 12:25:39 +00:00
adamdunkels
77ecfb0366
Rewrote parts of the retransmission logic so that collect is robust against the situation where the MAC layer will fail to callback after a packet has been transmitted.
2010-10-24 21:08:19 +00:00
adamdunkels
34cba78ca8
Bugfix: bump advertisements only when a parent changes, not because of an upstream parent change
2010-10-19 07:34:29 +00:00
oliverschmidt
2f89e69ff7
Fixed build for platforms which use the default value for QUEUEBUF_NUM.
2010-10-12 19:51:28 +00:00
adamdunkels
37adf130b4
Rewrite of the congestion logic. A node now report it being congested
...
when half the transmission queue is full. When a neighbor is heard to
be congested, the rtmetric of that node is inflated to avoid sending
more traffic in its direction.
Fixed problems with beacon intervals: intervals are now not reduced
when a path gets significantly worse, only when they get better.
2010-10-11 23:42:01 +00:00
adamdunkels
0cabe483c3
Don't call sink recv function for zero-size packets, since these most likely are link estimate probes or keepalive packets. Explicitly set eseqno to zero when opening a new connection.
2010-10-07 15:52:28 +00:00
adamdunkels
ad35c54473
Bugfix: when a node's rtmetric was lower than SIGNIFICANT_RTMETRIC_PARENT_CHANGE, its beacon timers would always be bumped to its lowest value
2010-10-05 20:06:47 +00:00
adamdunkels
52e9a6f1fb
Turned the DRAW_TREE debug flag off by default
2010-10-04 22:36:47 +00:00
adamdunkels
65d640ac53
Several bugfixes to the proactive link estimate maintenance code, which is now enabled by default. Simplified DRAW_TREE code for drawing routing graph in Cooja. Added routing metric penalty to parents that are congested or that drop packets.
2010-10-04 20:27:50 +00:00
adamdunkels
605392522f
Bugfixes and improvements: rtmetrics are now 16-bit clean. Added experimental feature that proactively probes neighbors that have not yet been tried out, in order to get an initial ETX for them.
2010-10-03 20:08:44 +00:00
adamdunkels
32ba90ea4c
Bugfix: make sure that neighbor exists before attempting to update tx
...
count.
2010-09-28 06:53:02 +00:00
adamdunkels
eed22a6f3c
A number of changes to the collect code:
...
* Added an optional "keep alive" mechanism whereby an idle network is
periodically probed by dummy packets to maintain a recent quality
metric when there is no traffic.
* Bugfix in when new routing metrics should be advertised
* Rewrote the ACK logic so that a queuebuf is not allocated for each
ack, only for those acks generated by the sink node.
* Updated the wrap-around logic for sequence numbers: when a sequence
number wraps, it won't go back to 0. Instead, it wraps to 128. This
allows us to understand when a node has rebooted: when its seqno is <
128, it has recently rebooted.
2010-09-22 22:08:08 +00:00
adamdunkels
18e31f33b9
Minor tweaks. Removed debug output from CVS.
2010-09-14 06:48:36 +00:00
adamdunkels
591766e663
Significant improvements to the Collect protocol:
...
* Loop detection and untangling. Now uses in-band loop detection that
works.
* Link quality estimation. Now starts with a conservative /
pessimistic estimate for new links.
* Retransmissions. MAC layer and network layer retransmissions are now
decoupled.
* Loss handling. Deals better with losses now.
* Concurrent applications. Each connection now maintains its own
neighbor table with separated cost to sink estimates for each
connection.
2010-09-13 13:28:14 +00:00
adamdunkels
4e0744954a
Rewrite of important parts of the Collect logic: link estimation
...
calculation and parent selection. This fixes a severe bug that caused
loops when packets were erroneously retransmitted due to ACK loss.
2010-09-08 19:21:45 +00:00
adamdunkels
3fa8ffda1a
Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific
2010-06-14 19:19:16 +00:00
adamdunkels
2647f879c2
Bugfix: select the best parent if current parent is NULL
2010-06-14 06:54:47 +00:00
adamdunkels
3d10dedecf
Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages.
2010-04-30 07:33:51 +00:00
fros4943
59357e8b75
PRINTF():ed debugging output
2010-04-01 11:08:36 +00:00
adamdunkels
d7457bc340
Improved parent management: parent neighbor is retained until a better neighbor is found (with 1 ETX less than parent). Don't drop parent neighbors when loop is detected (loops are transient anyway).
2010-04-01 10:03:19 +00:00
adamdunkels
4c3b69dc07
Configuration parameter for number of MAC-layer retransmissions
2010-03-29 21:52:25 +00:00
nifi
9508d2c4d7
* Added configurable default number of transmissions for CSMA to use when not specified using packetbuf attributes (CSMA_CONF_MAX_MAC_TRANSMISSIONS).
...
* Renamed packetbuf attribute PACKETBUF_ATTR_MAX_MAC_REXMIT to PACKETBUF_ATTR_MAX_MAC_TRANSMISSIONS where value 0 (attribute not set) means that default number of transmissions should be used.
2010-03-26 12:29:29 +00:00
adamdunkels
a4f9e62295
Added a parameter to collect_open() that specifies whether or not the node should be a router for packets, or only an originator of packets. Updated the collect module to the new annoucement API.
2010-03-25 08:51:07 +00:00
adamdunkels
7b0606cd58
Renamed the neighbor module to collect-neighbor, as it is only used by the collect module and is not a generic neighbor module
2010-03-19 13:17:00 +00:00
adamdunkels
36b995cc9a
Reenabled announcement support
2010-03-16 18:12:34 +00:00
dak664
0236c6e725
Leave compiler warning for 16 bit timers
2010-03-12 17:51:07 +00:00
dak664
52c9f4bde3
Remove compiler warning
2010-03-12 15:21:14 +00:00
adamdunkels
5a6fc2ade0
Bugfix: set up rtmetric before starting to announce it. Set the number of MAC layer retransmissions correctly
2010-03-09 13:21:28 +00:00
dak664
c65e09ceb2
Remove compiler warnings
2010-03-02 15:41:23 +00:00
adamdunkels
ec928a2a19
Make max queueing time depend on retransmission timeout
2010-02-28 14:15:58 +00:00
adamdunkels
7165a3866f
Significant rework of the Contiki data collection protocol:
...
* the new version makes use of MAC-layer feedback so that bad paths
can be identified quicker and then avoided.
* the new code uses transport layer ACKs that contain feedback from
the collect protocol: when a packet cannot be forwarded due to lack
of resources, the ACK contains a flag that indicates that the packet
could not be forwarded. ACKs also contain the routing metric of the
sender, which improves agility in face of rapid path changes.
* loop detection and management has been improved: with higher path
metric agility, the system is more prone to short-lived routing
loops. Instead of dropping looping packets, the new version adjusts
the routing metric for the routes that exhibit loops so that the
risk for future loops is reduced.
* make use of packet attributes to inform the MAC layer of how many
times packets should be retransmitted.
2010-02-28 09:18:01 +00:00
adamdunkels
0eade2886c
Better loop handling: when a loop is detected, the neighbor to which the packet was originally sent gets an inflated ETX; made sure that collect without announcments work; increased timeouts, to work nicer in larger networks
2010-02-23 18:35:23 +00:00
adamdunkels
4a522c96dd
Added debugging statements for packet drops
2010-02-08 21:59:49 +00:00
adamdunkels
d7b7b05d0e
Moved the neigbor_init() call to the collect module, since it is the only one that currently uses it
2010-02-03 20:38:33 +00:00
adamdunkels
f66cd6d44e
Increased the forwarding queue to six packets to improve collection robustness
2010-02-02 21:44:05 +00:00
adamdunkels
56218aba3b
Made rimeaddr_t pointers const where they should be.
2009-11-08 19:40:16 +00:00
nvt-se
33909cc2fd
made neighbor discovery method configurable. default is announcements.
2009-05-30 19:54:05 +00:00
