Commit graph

692 commits

Author SHA1 Message Date
dak664 95982b40ba $make will show avr-size once and only once whether or not a build needs to occur. 2010-12-22 21:13:09 +00:00
dak664 5b8e62ef4f Patches from R Larsson 2010-12-22 20:10:00 +00:00
dak664 013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664 44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664 e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson.
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
2010-12-21 04:25:15 +00:00
dak664 e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664 5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
adamdunkels f370b217a5 Turned up the rtimer resolution to 32678 Hz. 2010-12-16 22:50:21 +00:00
adamdunkels 1d090ea0f5 Made configuration of CC2420 SFD timestamps easier 2010-12-16 22:49:33 +00:00
adamdunkels c0fedd7661 Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module 2010-12-16 22:49:12 +00:00
dak664 570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664 aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664 1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru 5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664 c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664 9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664 35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664 58b7a19803 Hardware/software radio HAL patch from Roger Larsson.
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664 21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664 0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions.
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi 7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664 dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels 149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664 880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels 4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664 69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664 9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi 5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira 3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira 9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira 6da84819dd use stdint.h instead of custom types.h
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru 28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira 1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira 3b515587c5 change how prepare and transmit work --- Contiki expects to call
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
2010-11-07 20:07:42 +00:00
maralvira e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira 4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira 29333232d5 add section .start and undef _start so that _start is placed by the
linker correctly
2010-11-07 14:57:53 +00:00
maralvira b8ebce0fef add a memory section for RAM so that the linker will warn when you've
made your program too big.
2010-11-07 14:54:05 +00:00
maralvira 8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira 57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira 77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for
some reason.
2010-11-07 14:42:02 +00:00
maralvira dab7faf13c Add gpio_set and gpio_reset
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira 4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira 4217eb2ebc Provide a function to change timer interrrupt handlers
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
2010-11-07 14:27:01 +00:00
maralvira 65d3942c76 Add the disable_int({}) macro
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira 83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00
maralvira 5e00219a9c Register definitions: get rid of some macro magic that doesn't help much
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira 091e4cd84e Add structure-based ITC access 2010-11-07 14:23:15 +00:00
maralvira 11ac20a361 REF_OSC is a 32-bit number, not 64-bit number 2010-11-07 14:22:51 +00:00
maralvira 745e7b5ac2 Add cal_isr() support 2010-11-07 14:21:59 +00:00
maralvira ab84453401 Add structure-based CRM definitions 2010-11-07 14:21:33 +00:00
maralvira 9d072d5309 Add macro to help compute TMR.ENBL values (useful when using #defined
values to represent timers)
2010-11-07 14:21:06 +00:00
maralvira 85e6b06175 Add pin definitions for each timer, they're fixed 2010-11-07 14:19:17 +00:00
maralvira 8d2f740f7f Fix #ifdefs in board files 2010-11-07 14:18:54 +00:00
maralvira 3726588f02 Add structure-based GPIO register definitions 2010-11-07 14:17:45 +00:00
maralvira 20b477db13 Add structure-based timer register definitions 2010-11-07 14:17:20 +00:00
maralvira c71a0243ff Add missing type for TMR0_COMP2 2010-11-07 14:16:28 +00:00
maralvira 62a45c7ba2 Add script to invoke kermit with a particular port and speed 2010-11-07 14:15:40 +00:00
maralvira 2ac88222f6 Use "rm -f" in clean rules to ignore errors 2010-11-07 14:14:47 +00:00
maralvira 2e87143381 use kermit in open-terms 2010-11-07 14:13:22 +00:00
maralvira c8be3047c3 fix byte ordering in burn-macs 2010-11-07 14:12:55 +00:00
maralvira 0450b3fd90 add script that burns the mac address only --- mac address is Redwire
IAB + tty number.
2010-11-07 14:12:27 +00:00
maralvira f913cf728b modify flasher.c to not create a vaild boot magic number if the length
of the file is zero

modify mc1322x-load.pl to optionally send a zero length file with -z;
extra data on the command line is still written.

This allows you to burn the mac adress without flashing a vaild image.
2010-11-07 14:11:50 +00:00
maralvira 9f7d860e9c add scripts to help load a bunch of econotags 2010-11-07 14:11:18 +00:00
maralvira 8b2ef2675d discard received packets --- this lets you run multiple rftest-tx's at
the same time.
2010-11-07 14:10:16 +00:00
maralvira e00349509d add simple install rule 2010-11-07 14:09:43 +00:00
maralvira ee943c062d add autoreset command and do_exit option 2010-11-07 14:08:50 +00:00
maralvira e886e83908 fix bug in print_packet
Thanks dean and jim.
2010-11-07 14:07:33 +00:00
maralvira f1fede7090 get LQI of received packets 2010-11-07 14:06:57 +00:00
maralvira ae0b7f846f Fix the CNTR defines.
Thanks to Ruslan for finding this.
2010-11-07 14:04:59 +00:00
maralvira 646a37f8b3 use the hardware random number generator 2010-11-07 13:52:12 +00:00
dak664 eb0d5c7f45 Add missing includes 2010-11-03 16:55:40 +00:00
oliverschmidt 1dfe490f9b Use some defined event constant instead of just 0. 2010-10-31 22:51:17 +00:00
dak664 9194b3ac69 Fix error when RS232 not enabled 2010-10-28 19:31:28 +00:00
dak664 ad6712736b Fix Windows XP RNDIS+CDC serial port enumeration 2010-10-28 19:30:14 +00:00
dak664 258e3cc93a Allow simultaneous use of RS232 and USB serial ports 2010-10-27 14:51:20 +00:00
salvopitru d8711d32a3 Added configuration in order to run Rime. 2010-10-27 14:05:23 +00:00
salvopitru db3f1864a0 Increased minimum stack size, because rpl uses it much more. 2010-10-26 11:07:20 +00:00
salvopitru 33ccbbb509 Fixed compile error raised after rand.c removal. 2010-10-26 10:47:23 +00:00
salvopitru 444a00949a Added missing libraries. 2010-10-26 10:24:17 +00:00
salvopitru 790f13a689 More safe detection of cygwin path. 2010-10-26 07:26:40 +00:00
salvopitru ec5e3ce0d7 New Contiki port to STM32W108. 2010-10-25 09:03:38 +00:00
adamdunkels 34f6a60a4a By default, don't print stack on reboot, since there are cases where this may hang the CPU (when the CPU is in LPM when the watchdog triggers). Must fix the code to set the UART and CU into correct modes before enabling stack printout on reboot. 2010-10-24 21:10:25 +00:00
oliverschmidt 9a8c62a629 Removed remark on using cc65 snapshot. 2010-10-23 19:42:53 +00:00
dak664 123e3cae41 Fix compiler warnings 2010-10-23 15:26:46 +00:00
oliverschmidt 5e10cf2eed Implemented cfs_opendir() and friends for CBMs based on cc65's cbm_opendir() and friends. 2010-10-23 13:48:06 +00:00
oliverschmidt 9e9eb4b55c There's no point in pulling in cfs-posix-dir.c if the POSIX functions it depends on are dummies anyway. 2010-10-23 08:17:45 +00:00
oliverschmidt b84f771c6b The recent change in core/net/mac/lpp.c requires CLOCK_SECOND to be at least twice NETSTACK_RDC_CHANNEL_CHECK_RATE in order to compile. 2010-10-22 20:28:58 +00:00
dak664 7be7a34bbb Fix windows COM port enumeration 2010-10-22 19:15:43 +00:00
dak664 774474b7aa Fix compiler warning 2010-10-20 18:57:33 +00:00
oliverschmidt 842c6a018a The recent global change regarding htons allowed to remove this hack :-) 2010-10-19 20:30:47 +00:00
adamdunkels 5585d72c86 A simple but substantial change: uIP used the htons()/HTONS() macro
functions for converting between host and network byte order. These
names are the de facto standard names for this functionality because
of the original BSD TCP/IP implementation. But they cause problems for
uIP/Contiki: some platforms define these names themselves (Mac OS,
most notably), causing compilation problems for Contiki on those
platforms.

This commit changes all htons to uip_htons instead. Same goes for
htonl, ntohs, and ntohl. All-caps versions as well.
2010-10-19 18:29:03 +00:00
oliverschmidt 35f7b6046e Fixed 'Modulo operation with zero' error by making sure that NETSTACK_CONF_RDC_CHANNEL_CHECK_RATE is not smaller than CLOCK_CONF_SECOND. 2010-10-06 19:48:26 +00:00
oliverschmidt a40594b7ce Display correct name of statically loaded driver. 2010-09-29 21:48:54 +00:00
oliverschmidt c839eacbdf Added cc65 target 'atari' for Atari 8-bit machines. This addition was triggered by exsistence of http://www.atari8ethernet.com/. 2010-09-29 19:44:01 +00:00
oliverschmidt 55d61d317b Allow cc65 ethernet drivers to be loaded statically instead of dynamically. This saved quite some space in scenarios without additional cc65 drivers to be loaded for i.e. a mouse because in those scenarios the cc65 module loader isn't necessary. And without the module loader typically the cc65 heap manager isn't necessary. 2010-09-28 23:02:16 +00:00
adamdunkels 7c14899eeb Made stack printout on reboot configurable.
Added the ability to turn on watchdog multiple times - the watchdog
registers are touched only when the watchdog goes from off to on state
to avoid retriggering the watchdog when it shouldn't.
2010-09-22 22:12:37 +00:00
dak664 110bc0242e Merge CDC-ECM, RNG, DFU bootloader, watchdog, settings manager, energy scan routines of Robert Quattlebaum 2010-09-17 21:59:09 +00:00
nifi f5ea831445 Added function rtimer_arch_now that makes sure that the timer value does not change between readouts to avoid reading while the timer is being updated. 2010-09-13 20:51:09 +00:00
maralvira 1cb0762bd0 Don't post from an interrupt context --- this resulted in process
corruption if a packet was received at the wrong time.

The maca_thread now just PAUSEs and checks rx_head instead of waiting
for a data event to be posted.
2010-09-13 14:15:58 +00:00
joxe c0549cad3d added some files for MSP430X I/O 2010-08-24 16:23:20 +00:00
maralvira df9d43ab83 increase the reception time now that tx_packet will advance the timer
as necessary.
2010-07-28 18:49:34 +00:00
maralvira 9a7a2742b3 remove bad call to maca_on()
maca_on() resets the maca and phy, takes a long time, and clobbers any
packet that is currently being transmitted or received. It doesn't
belong in prepare and was the source of a lot of latency and bad
packet transmissions.

Make sure the maca is on somewhere else.
2010-07-28 18:48:51 +00:00
maralvira a3b9c2adb0 in tx_packet, force an interrupt if the maca isn't doing anything so
that the transmit starts. Or if the maca is in a reception cycle,
advance the softclock timeout to now so that transmission starts as
soon as possible (immediately if a packet isn't being received or
right after reception finishes).
2010-07-28 18:48:03 +00:00
maralvira 593a50c38f make the debug prints in check_maca more specific 2010-07-28 18:47:35 +00:00
maralvira 422d05003f use 32 packets in the pool by default 2010-07-28 18:47:05 +00:00
maralvira eb0e3b7989 fix long standing bug where the last pages of NVM were not erased
properly.
2010-07-28 18:43:04 +00:00
oliverschmidt c602c61468 Activated Platform-specific File System (PFS) for the C64/C128 by default for all programs with R/W CFS access. 2010-07-22 10:30:12 +00:00
oliverschmidt 9c0f5d857c Updated API for uiplib and resolv to use uip_ipaddr_t instead of uint16_t. 2010-07-21 22:35:59 +00:00
maralvira 5b44d6a29a properly drop characters when buffer is full
fix by David Kopf
2010-07-06 13:39:34 +00:00
joxe 0c5390339f updated to new cc2420 spi naming 2010-06-23 10:44:41 +00:00
joxe 705f8cc451 fixed naming of SPI and CC2420 related code 2010-06-23 10:19:15 +00:00
dak664 898c00b812 Remove usually extra avr-size command 2010-06-22 17:11:38 +00:00
dak664 e45b1c042b TIMER2 uses TIMER2 interrupt vector! 2010-06-22 16:17:24 +00:00
dak664 ab7f3bd8e3 Option to use 32768Hz watch crystal for timing. Code suggested by Georg von Zengen. 2010-06-18 17:30:30 +00:00
dak664 cb45883970 Turn on DEBUGFLOW and software CRC computation 2010-06-18 15:44:53 +00:00
nifi 20c8b4f9c6 removed obsolete comments 2010-06-15 13:30:42 +00:00
adamdunkels 3fa8ffda1a Moved the modules packetbuf, queuebuf, and packetqueue from net/rime to net/, since they are not Rime-specific 2010-06-14 19:19:16 +00:00
maralvira 419906a769 initial mc1322x commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-10 14:55:39 +00:00
maralvira 285f508cc9 initial commit of src files 2010-06-10 14:49:31 +00:00
maralvira bf9f960bbe add board files. 2010-06-10 14:48:32 +00:00
maralvira 1145fa9ba9 initial mc1322x commit
based on commit aac3a355451d899f02737f2907af8c874ee4feba of

git://git.devl.org/git/malvira/contiki-mc1322x.git
2010-06-09 14:43:22 +00:00
oliverschmidt d28865abac Adjusted hacky inline assembler to reference uip_aligned_buf instead of uip_buf - some day I'll need to clean up that (btw bogus) code. 2010-05-30 10:12:30 +00:00
oliverschmidt 126ea40994 Removed UIP_CONF_PLAIN_BUFFER again now that the pointer indirection to uip_buf was removed again. 2010-05-30 09:46:12 +00:00
nifi 808116ff56 Made SFD timestamps configurable via external definition 2010-05-10 11:32:44 +00:00
oliverschmidt 2169932727 Have the cc65 based targets stay with the "old" plain uip_buf. 2010-05-08 07:25:10 +00:00
dak664 972e2f5d4f Add MCU to avr-size command; Remove fuse and signature from .hex; Give bootloader more memory 2010-05-04 14:14:49 +00:00
nifi 9638789d9d Added rule to use MSPSim to show the maptable from the last compilation on MSP430 targets 2010-04-20 15:38:09 +00:00
oliverschmidt 7b5bde6336 Made the maximum number of concurrent TCP connections a highlevel config value. 2010-04-11 20:47:16 +00:00
anthony-a 04fb6e5b42 initial add. 2010-04-10 21:18:32 +00:00
anthony-a 3de90a9671 fix adc compile errors when HAVE_DMA is not true.
remove reference to brione_lcd.h
turn off DEBUG messages.
2010-04-10 19:59:37 +00:00
oliverschmidt 21f8e4e982 Made MAC_CONF_CHANNEL_CHECK_RATE identical to CLOCK_CONF_SECOND in order to make sure it isn't larger - which causes 'divide by zero' errors. 2010-04-05 15:17:22 +00:00
oliverschmidt 9831f02eba Replaced dummy code with code taken from 'native'. 2010-04-05 15:13:50 +00:00
oliverschmidt ffce456612 If rtimer_arch_now() is mapped to clock_time() it seems reasonable to map RTIMER_ARCH_SECOND to CLOCK_CONF_SECOND for consistency reasons. 2010-04-05 15:10:06 +00:00
oliverschmidt 26e61ac3f7 Programs using CFS should #include "cfs.h" ;-) 2010-04-05 13:41:29 +00:00
adamdunkels 5eb22ad289 Print out stack pointer when rebooting node 2010-04-04 12:30:10 +00:00
adamdunkels 0ed236e774 Bugfix: the clock interrupt now flushes the energy estimator to avoid overflow of the LPM mode 2010-04-04 12:29:50 +00:00
adamdunkels 52ad0008dc Bugfix 2010-03-31 11:55:04 +00:00
adamdunkels 4447782ab4 Print out a stack trace when a node reboots because of the watchdog 2010-03-30 23:02:23 +00:00
adamdunkels ac172a5575 Turn off LPM mode for clock interrupts to avoid rtimer wrapping during extended LPM 2010-03-29 21:53:32 +00:00
oliverschmidt 54e19782ae Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations. 2010-03-27 15:16:57 +00:00
oliverschmidt 6769e6a99f - Moved PFS header from Apple2 directory to 6502 directory as we're going to have other PFS implementations.
- Completed declarations.
2010-03-27 14:46:08 +00:00
nifi ebfa6c5ef1 only include memcpy/set workaround when needed 2010-03-21 10:40:15 +00:00
joxe e99c906caf activated the new workaround... 2010-03-19 14:50:07 +00:00