Simon Duquennoy
efcf38601c
Merge pull request #1429 from wbober/sicslowpan_fixed_header
...
Allow for using a fixed frame header length in sicslowpan.c
2016-07-25 14:56:49 +02:00
Simon Duquennoy
21387b954f
Merge pull request #1493 from simonduq/pr/add-missing-ext-hdr
...
Insert RPL ext header before sending ICMP, UDP and TCP messages
2016-07-25 14:56:25 +02:00
Simon Duquennoy
ff5a4751c8
Merge pull request #1610 from simonduq/pr/tsch-rime
...
TSCH with Rime
2016-07-25 14:55:37 +02:00
George Oikonomou
9d3e4bc591
Merge pull request #1789 from tidyjiang8/tidy.0718
...
Update comments: RFC3513 is obsoleted by RFC4921
2016-07-24 15:18:56 +01:00
George Oikonomou
8ab0522cec
Fix PROP mode channel switching
...
If `NETSTACK_CONF_RADIO.set_value(RADIO_PARAM_CHANNEL, ...)` is called when radio is on, it will fail to apply the channel change, because it won't re-send `CMD_PROP_RADIO_DIV_SETUP` and `CMD_PROP_FS`. This commit fixes this condition, by making sure the correct commands are sent to the radio.
2016-07-24 03:39:13 +01:00
Benoît Thébaudeau
901c45e687
Merge pull request #1793 from sumanpanchal/cc2538-i2c
...
Minor data type correction.
2016-07-22 22:02:20 +02:00
Sumankumar Panchal
3bb58b7c82
Minor data type correction.
2016-07-22 22:49:49 +05:30
Simon Duquennoy
f23c59644c
Merge pull request #1721 from sumanpanchal/openmote-tsch
...
TSCH port for CC2538 based platforms.
2016-07-22 16:56:43 +02:00
Sumankumar Panchal
6dfd358821
TSCH port for CC2538 based platforms.
2016-07-22 09:38:25 +05:30
Kitty(chun hua) Jiang
b5bc140680
Update comments: RFC3513 is obsoleted by RFC4921
2016-07-18 17:29:16 +08:00
George Oikonomou
94413f99fe
Shrink ND cache and routing table for the CC26xx web demo
2016-07-17 01:31:21 +01:00
George Oikonomou
e7c5c36090
Change CCxxware submodule URLs
...
We now host both CCxxware repos under contiki-os, so we change the submodule URLs accordingly.
2016-07-17 00:26:52 +01:00
George Oikonomou
eec890d60e
Update CC26xxware to v2.24.02.17202
2016-07-17 00:26:52 +01:00
George Oikonomou
fd82603786
Update CC13xxware to v2.04.02.17240
2016-07-17 00:26:52 +01:00
George Oikonomou
dc1f9fe010
Simplify MODESEL value determination
2016-07-17 00:26:52 +01:00
George Oikonomou
9839b91be5
Enable the ROM bootloader in our examples
2016-07-17 00:26:52 +01:00
George Oikonomou
4495d14702
Make ROM bootloader configurable through contiki- or project-conf.h
2016-07-17 00:26:52 +01:00
George Oikonomou
01590088d3
Update to latest CCxxwares: Srf06+EM drivers
2016-07-17 00:26:52 +01:00
George Oikonomou
f6437b6086
Update to latest CCxxwares: Sensortag drivers
2016-07-17 00:26:52 +01:00
George Oikonomou
5de7b1bbac
Update to latest CCxxwares: Launchpad drivers
2016-07-17 00:26:51 +01:00
George Oikonomou
c42cb2b0cb
Update to latest CCxxwares: common drivers
2016-07-17 00:26:51 +01:00
George Oikonomou
ccba6bdb20
Update cpu files to reflect API in latest CCxxware versions
2016-07-17 00:26:51 +01:00
George Oikonomou
0e4c02bf3b
Update ChipInfo and OSC macros
2016-07-17 00:25:18 +01:00
George Oikonomou
f68b77fdfa
Remove ROM AUX timer macros
...
They have been undefined in CCxxwares
2016-07-17 00:25:17 +01:00
George Oikonomou
171fe8d08e
Adjust GPIO macros to reflect API in latest CCxxware
2016-07-17 00:25:17 +01:00
George Oikonomou
788cb1e119
Move ROM function macros to separate file
2016-07-17 00:25:17 +01:00
George Oikonomou
568973f6ec
Don't flush the CC2538 RF RX FIFO unconditionally
...
After reading a frame, `read()` checks the status of the RX FIFO:
* If an overflow is detected, the FIFO gets flushed
* If there are more frames in the FIFO, the `cc2538_rf_process` will get polled again in order to read out the next frame.
#1550 changed `read()`, which now performs the above check for non-poll mode, but it then flushes the FIFO unconditionally. Therefore, if there are two or more frames in the FIFO, they will get flushed before the `cc2538_rf_process` has had a chance to read them out. This results in missed frames.
Reproducing this is trivial: Build a CC2538 sniffer and see how it will never show you .15.4 ACK frames. ACK reception completes while `read()` is still streaming the previous captured frame to the host. Upon completion, the FIFO will get flushed and the ACK will get lost.
This pull proposes removing the unconditional flush and reverting to the original logic for non-TSCH operation.
Pinging @thomas-ha here for input regarding poll mode.
This pull sits on top of #1778
2016-07-17 00:24:47 +01:00
Benoît Thébaudeau
c05665a16b
Merge pull request #1778 from g-oikonomou/contrib/cc2538/rf-driver-code-style
...
Improve code style of the CC2538 RF driver
2016-07-17 01:22:21 +02:00
George Oikonomou
c87e579b06
Adjust ContikiMAC timings for CC13xx PROP mode
...
#1684 slightly varied RF startup time and, as a result, threw ContikiMAC timing configuration off. This manifests itself with very poor CC13xx PROP mode radio performance, as documented in #1747 .
This pull fixes this bug by slightly increasing ContikiMAC's inter-packet interval. This gives the receiver a little more time to respond with an ACK to unicast frames.
Fixes #1747
2016-07-17 00:04:07 +01:00
George Oikonomou
dcad5e7e3f
Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
...
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou
7fdb9849de
Remove unnecessary parentheses
2016-07-16 22:35:23 +01:00
George Oikonomou
f1c37b309a
Merge pull request #1779 from atiselsts/bugfix/cc26xx/rf_poll_mode
...
CC26xx: enable MCU sleeping while transmitting if and only if not in poll mode
2016-07-16 20:02:43 +01:00
George Oikonomou
fe571c7dc3
Merge pull request #1754 from atiselsts/enhancement/cc26xx_reduced_guard_time
...
CC26xx: change default TSCH guard time to 1.8ms
2016-07-16 19:47:16 +01:00
George Oikonomou
f1637ba74d
Merge pull request #1781 from atiselsts/bugfix/tsch/delayed_detection
...
TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received
2016-07-16 19:46:09 +01:00
Atis Elsts
2fe4b4d5bb
CC26xx: enable MCU sleeping while transmitting if and only if not in poll mode
2016-07-16 18:22:20 +01:00
Atis Elsts
081ec100a4
TSCH: add RADIO_DELAY_BEFORE_DETECT to rx guard time when waiting for a packet to be received
2016-07-16 18:08:41 +01:00
George Oikonomou
c359e98bf1
Change mac_timer_init() to static
...
We also move the function to a different location so we won't have to provide the prototype separately
2016-07-16 17:11:58 +01:00
George Oikonomou
6ef9509dfb
Change get_sfd_timestamp() to static
...
We also move the function to a different location so we won't have to provide the prototype separately
2016-07-16 17:11:57 +01:00
George Oikonomou
833dc89f7c
Fix code style
2016-07-16 17:11:57 +01:00
George Oikonomou
0313f9abf1
Merge pull request #1751 from atiselsts/bugfix/cc26xx_etimer_sleep
...
CC26xx: fix a regression in and refactor LPM code
2016-07-16 14:45:56 +01:00
Nicolas Tsiftes
8a5886dfa1
Merge pull request #1767 from simonduq/pr/missing-return
...
RPL: added missing return, to not join instances with unsupported MOP
2016-07-15 21:10:57 +02:00
Nicolas Tsiftes
afa8125913
Merge pull request #1777 from herjulf/master
...
Fix README.md not reference GPL
2016-07-15 20:30:06 +02:00
Antonio Lignan
0d0e726b38
Merge pull request #1764 from alignan/pull/zoul-dht22
...
Added DHT22 sensor to Zoul-based platforms
2016-07-15 12:50:34 -05:00
Robert Olsson
fbf3daa564
Fix README.md not reference GPL
2016-07-15 17:44:20 +02:00
George Oikonomou
d36c8762c1
Merge pull request #1776 from herjulf/master
...
Removed unused file platform/avr-rss2/dev/ds18b20.c
2016-07-15 15:51:51 +01:00
Robert Olsson
a8aa778b31
Removed unused file platform/avr-rss2/dev/ds18b20.c
2016-07-15 13:17:40 +02:00
Joakim Nohlgård
f16f5b5241
squash clean up left overs
2016-07-09 10:39:23 +02:00
Joakim Nohlgård
6b238873ef
squash move rest-engine timers to activate timer
2016-07-09 10:34:23 +02:00
Marko Gucanin
1fc9bbe315
added { }
2016-07-08 16:25:34 +02:00
Joakim Nohlgård
e7070a5f79
rest-engine: Allow adding periodic resources after starting REST engine
...
Without this fix, any periodic resources added after the REST engine was
already running were never started.
2016-07-06 19:18:34 +02:00