nifi
bb0ffe0478
moved rime initialization into rime router so it is easier to switch IPv6 routing module
2009-11-18 13:51:55 +00:00
fros4943
0034fd7bca
generic return values for sent packet
2009-11-13 10:09:02 +00:00
fros4943
9cc57c4324
generic radio return values
...
+ minor bug fix: SFD may go high without transmission starting (very seldom)
2009-11-13 10:07:53 +00:00
fros4943
9b20f11cd8
chameleon returns 1 only on successful rime_output()
2009-11-13 09:14:52 +00:00
fros4943
583dd11c55
rime_output() now returns RIME_OK or RIME_ERR depending on the MAC return value.
...
this patch may affect Rime sniffers running on top of MAC protocols that do not yet return generic MAC return values
2009-11-13 09:10:24 +00:00
fros4943
26bb5ecd21
added radio and MAC generic return values to allow applications finding out whether the packet was transmitted
2009-11-13 08:59:22 +00:00
joxe
5b0b36c39e
accept messages to all routers if UIP_CONF_ROUTER is set.
2009-11-12 14:05:42 +00:00
adamdunkels
60a3fc0cae
Fixed alignment issue
2009-11-09 08:22:40 +00:00
adamdunkels
56218aba3b
Made rimeaddr_t pointers const where they should be.
2009-11-08 19:40:16 +00:00
adamdunkels
70fc23ac7e
Enable stream mode by default, remove LED debug mode
2009-11-04 16:02:45 +00:00
fros4943
5f71e9914e
configurable line buffer size + simplified interrupt handler + overflow check on line buffer
2009-11-02 12:47:06 +00:00
adamdunkels
5aab2eb77d
A simple addition with significant performance implications:
...
sicslowpan tags TCP packets with the PACKETBUF_ATTR_PACKET_TYPE_STREAM
flag, which makes the underlying power-saving MAC layer keep the radio
on for some time after transmitting the packet. This allows reply
packets to be processed directly, significantly increasing TCP latency
and throughput.
2009-11-02 11:58:56 +00:00
adamdunkels
c7a91ad4a2
Bugfix: UIP_TCP_BUF -> BUF
2009-10-27 23:09:58 +00:00
adamdunkels
631af06c7c
Bugfix: Active TCP connections in uIP are made by first setting up the
...
TCP connection state, then poll uIP to send out the first SYN. Until
now, however, the SYN was not sent as part of the poll, but at the
first retransmission. This is now fixed.
2009-10-27 22:34:08 +00:00
fros4943
6f4a537aa0
serial line ringbuf implementation + increased default buffer size to 128 bytes
2009-10-27 16:20:31 +00:00
zhitao
1913e1a936
prevent neighbor ETX from wrap-over
2009-10-22 13:11:20 +00:00
nifi
df32fde58c
Made max number of neighbors configurable
2009-10-21 21:25:10 +00:00
adamdunkels
a25a3a45b5
Bugfix: attribute energy expenditure to a device only if the device was actually switched on
2009-10-20 20:19:27 +00:00
adamdunkels
91579fbaab
Removed debug strings to save ROM
2009-10-20 08:06:43 +00:00
nifi
223fa1c8e5
added missing include
2009-10-20 07:42:03 +00:00
adamdunkels
a5ea7ef966
Increased default number of queue buffers
2009-10-19 21:28:59 +00:00
adamdunkels
4d9b05c2ce
Increased default header size in packetbuf to accomodate 802.15.4 headers
2009-10-19 21:28:11 +00:00
adamdunkels
7cdfbca973
Alignment problems with announcements fixed
2009-10-19 21:27:02 +00:00
adamdunkels
9ec57d61ad
Added MAC layer framing support to X-MAC so that packets now are standard 802.15.4 frames
2009-10-19 20:53:56 +00:00
adamdunkels
4de1816e36
Added a new module called "framer" that creates MAC level frames to
...
the packetbuf from packet attributes. Two framer modules are included,
one that creates 802.15.4 frame headers, and one that creates a
minimal "nullmac"-style header that only contains the link-local
addresses.
2009-10-19 18:30:03 +00:00
nifi
ae226c5917
* Set sender and receiver packet attributes on incoming packets
...
* Added link layer destination check
2009-10-19 11:25:54 +00:00
adamdunkels
10c873018d
Ensure that DEFAULT_PERIOD is != 0, to avoid a modulo with 0
2009-10-19 06:39:29 +00:00
adamdunkels
f25856a387
Hack to be able to receive UDPv4 multicast packets
2009-10-18 22:03:44 +00:00
adamdunkels
fb037e0afb
Added function for sending an UDP packet to a specified IP address and port number over an existing UDP connection
2009-10-18 22:02:01 +00:00
adamdunkels
9d26bd663e
A new optimization to X-MAC: senders now keep track of when neighbors
...
last were known to be awake. When sending a packet, a sender does not
start to send strobes until the neighbor is expected to be awake. This
reduces power consumption for senders and decreases the contention in
the network as there are less packets in the air. Additionally, the
ACK optimization was improved so that data/ack exchanges now are
more efficient.
2009-10-18 13:19:25 +00:00
nvt-se
31f41d842e
* decline route discovery requests if we have one in the air
...
* and, by popular demand, switched PRINTF to printf in the debug macro. :-)
2009-10-08 16:30:26 +00:00
nvt-se
f143227205
made the route discovery packet timeout configurable.
2009-09-29 16:02:28 +00:00
nifi
0ad51b8dcc
Moved the link layer destination check to sicslowmac
2009-09-18 16:37:17 +00:00
adamdunkels
49e9b0bdcb
Fixed compiler warning
2009-09-09 21:10:35 +00:00
adamdunkels
1980253ba3
Refresh routes when hearing a packet from a neighbor
2009-09-09 21:10:21 +00:00
adamdunkels
786ed3cf84
Fixed sdcc compiler problem: function pointers cannot be NULL, so added a dummy function instead
2009-09-09 21:09:42 +00:00
adamdunkels
2181e90f69
Added the possibility to switch lpp off. Fixed sdcc compiler issue
2009-09-09 21:09:23 +00:00
adamdunkels
1cafbc6002
sdcc compiler issue fix: compound assignments are not supported, so we use memcpy() instead
2009-09-09 21:08:46 +00:00
adamdunkels
8745235a79
Minor codestyle fix
2009-09-09 21:07:42 +00:00
nifi
d4b619bcc5
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
2009-09-07 11:31:26 +00:00
nvt-se
4d21a3e203
Don't assume that radio->send turns on the radio automatically.
2009-09-04 10:59:30 +00:00
nvt-se
a21dece53f
removed unused state codes and unused printf statements
2009-09-03 12:57:57 +00:00
nifi
3a8ee769cb
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
2009-08-31 12:06:34 +00:00
oliverschmidt
e60db62b10
Added prototype missing for quite some time now - do we need -Werror ?
2009-08-20 20:27:17 +00:00
adamdunkels
522f991f14
Set sender and receiver packet attributes on incoming packets: patch by Gidon Ernst
2009-08-20 18:59:17 +00:00
nifi
c81dbb6c89
Fixed problem with the radio driver changing transmission power to max when not specified at transmission. Also fixed bug where the lock was released when setting the transmission power.
...
Thanks to Djamel Djenouri and Marcus Lundn for identifying the problem.
2009-08-19 15:05:05 +00:00
fros4943
18a98bb573
bug fix: we need to explicitly turn off the cc2420 listen mode after a packet transmission
2009-08-19 12:00:04 +00:00
nvt-se
8acea82207
Set a file mode in the third argument when calling open() with O_CREAT in
...
the flags. Required by IEEE Std 1003.1, 2004 Edition.
2009-08-10 09:50:55 +00:00
joxe
0c8b200987
added autoack configuration for CC2420 and reversed long ieee address for address recognition
2009-07-28 22:24:53 +00:00
dak664
c1b7375a5a
*** empty log message ***
2009-07-23 16:13:48 +00:00
dak664
95d844d09f
Third attempt with INCLUDE_APPLICATE_SOURCE to remove compile warnings without breaking any platforms
2009-07-16 18:02:34 +00:00
dak664
5e6769b4c1
Fix previous 2 overhasty commits which broke required signedness of address shifts
2009-07-16 17:43:39 +00:00
dak664
c4b4c25e1c
Bugs in previous change, could include 32 bit code on 16 bit builds
2009-07-16 17:33:50 +00:00
dak664
4531d66986
INCLUDE_APPLICATE_SOURCE defined to remove compiler warnings. Untested but should work on all AVR builds.
2009-07-16 17:17:22 +00:00
nvt-se
62b380b0a6
Fixed a bug with reading to far in get_record index. Thanks to Darren Moore for reporting this.
2009-07-16 11:58:44 +00:00
dak664
2166261890
Separate input and output debug PRINTFs
2009-07-10 13:33:45 +00:00
nvt-se
906717a333
* isolate only pages in the last sector
...
* set max_pages to 0 when calling remove_by_page to prevent file starvation.
* when allocating files, only update next_free if the allocated file starts at next_free.
Thanks to Darren Moore (CSIRO) for suggesting the first two of the
three changes.
2009-07-09 22:16:22 +00:00
nvt-se
c872a86653
undo accidental enabling of debug output.
2009-06-29 13:33:12 +00:00
nvt-se
1e0ca9ceac
Made the use of micro logs configurable to make file modifications
...
more efficient on storage types that support inline updates.
The sky platform uses logs, and the native platform uses no logs.
2009-06-29 13:30:16 +00:00
nvt-se
38fff1b527
mac_driver structure has been changed to include the init function.
2009-06-24 16:31:49 +00:00
joxe
a71664e8d1
quick fix for driver to work with 4MHz
2009-06-23 13:12:37 +00:00
adamdunkels
1c18bf4053
-> 2.3
2009-06-22 20:40:43 +00:00
nifi
912aba7280
added init function in MAC driver for easier configuration
2009-06-22 11:14:11 +00:00
nvt-se
53a8acc49a
cleared debug flag.
2009-06-10 15:13:37 +00:00
nvt-se
349e14abd4
fixed GC bug with big files and unwanted buffer overwrite bug.
2009-06-10 15:03:35 +00:00
nvt-se
33909cc2fd
made neighbor discovery method configurable. default is announcements.
2009-05-30 19:54:05 +00:00
nvt-se
83f2b9ae57
include ctimer.h, since ctimer's are used in the neighbor_discovery_conn struct.
2009-05-30 19:40:39 +00:00
nvt-se
d9b75b2fda
stop the watchdog while merging.
2009-05-26 14:27:06 +00:00
nvt-se
9277f922f1
fixed some documentation typos.
...
also uc -> unicast, stuc -> stunicast.
2009-05-26 13:58:53 +00:00
nifi
f39d2bd4c6
Fixed link panid for broadcasts to be standard compliant. Ignore packets addressed to other non-broadcast panids.
2009-05-26 12:08:29 +00:00
nvt-se
88766d8740
use unsigned for sector count type.
2009-05-25 22:10:04 +00:00
nvt-se
e2bbdbca9b
decrement TTL right after forwarding check.
2009-05-19 11:54:50 +00:00
nvt-se
b0a8154e96
make it possible to accumulate CRC values through crc16_data.
2009-05-14 12:05:04 +00:00
nvt-se
2978270e43
decreased the code size to less than 5000 bytes. (msp430 code)
...
improved clarity in read and write code.
added negative offset check in cfs_seek().
removed unnecessary multiplication.
2009-05-13 13:27:19 +00:00
nvt-se
995e788d73
Fixed append->modify->append bug.
...
Approximately doubled the speed of file reservations.
Reduced the compiled code size by about 100 bytes by removing redundant code.
2009-05-11 16:35:49 +00:00
nvt-se
74e9bc8789
Added flash reads and writes to energest.
2009-05-11 15:26:24 +00:00
adamdunkels
5308a09dd3
Added debug output
2009-05-10 21:10:23 +00:00
adamdunkels
02734c9806
Bugfix: must copy the sender and receiver addresses from the packetbuf buffer, otherwise an application program may overwrite them
2009-05-10 21:10:02 +00:00
adamdunkels
fe5a1f1068
Added an optimization option that avoids multiple simultaneous broadcasts from neighbors: when a broadcast is to be sent, a sender does not send until it knows that no other nodes are broadcasting.
2009-05-10 21:09:05 +00:00
adamdunkels
fe30886b37
Added functionality for decaying routes: when a packet is sent over a route, it is decayed. If the route is not refreshed within four packets (with the route_refresh() function, which is called when a new packet arrives), the route is dropped. A route can be decayed at most once per second
2009-05-10 21:08:01 +00:00
adamdunkels
6bf8e0b478
Bugfix by Takahide Matsutsuka: too few items in array, which caused problems with sdcc
2009-05-08 08:52:55 +00:00
zhitao
48d4800f08
removed reference to undefined function in mspgcc
2009-05-06 15:34:28 +00:00
adamdunkels
c330b23c57
Minor documentation addition
2009-05-06 15:07:35 +00:00
adamdunkels
1d921ddf42
Explicit typecast to avoid compiler problems
2009-05-06 15:07:09 +00:00
adamdunkels
0adceb63b4
Code cleanup; made encounter optimization explicit; added optimization for adaptive off-time, but it currently seems to work bad with broadcasts
2009-05-06 15:06:38 +00:00
adamdunkels
9fff85757d
Code cleanup; made strobe transmission time longer again (seems to work better in cooja?)
2009-05-06 15:05:28 +00:00
adamdunkels
a671ea1146
Documentation fix
2009-05-06 15:04:20 +00:00
zhitao
58940ecbf8
minor documentation fixes
2009-05-06 08:37:48 +00:00
nvt-se
55ec3093ec
removed complicated and mostly unused EOF hint code.
2009-05-04 22:30:32 +00:00
nvt-se
8e52b1bcfd
made the documentation more clear.
2009-05-04 22:29:48 +00:00
adamdunkels
1752b53f74
Refresh routes when a packet is received. Set a conservatively low route timeout (10 seconds).
2009-05-04 11:24:04 +00:00
adamdunkels
c83c5c4c55
Removed automatic refresh of routes from the route_lookup() function and moved it into an explicit route_refresh() function. The previous behaviour was dangerous, since it meant that even bad routes that someone was looking for were considered fresh. Now such routes time out if they are not explictily refreshed (e.g., on a packet reception)
2009-05-04 11:23:30 +00:00
adamdunkels
f5a57a4e54
Fixes by Ward Van Heddeghem (reapplied from versioin 1.24)
2009-04-30 20:21:06 +00:00
adamdunkels
e70cf0c7c6
Rewrite of the collect module. The new version uses a packet queue for outgoing and forwarded packets so that more than one packet can be forwarded at the same time. The new version uses the packetqueue module to maintain the packet queue.
2009-04-29 20:48:57 +00:00
adamdunkels
c489b1118d
New module: packetqueue. The packetqueue module maintains packet queues for other modules.
2009-04-29 20:47:30 +00:00
nvt-se
17fa2f1618
make sure that page isolation is called after erasing a sector in reluctant GC.
...
simplified the GC logic a bit.
2009-04-29 13:15:59 +00:00
adamdunkels
cc44e89415
Reduced default strobe time, which seems to work well. Avoid running the interrupt if the power-save feature is turned off (fixes problems with serial data reception on a gateway mote)
2009-04-29 11:42:13 +00:00
adamdunkels
c02a82ac41
Tag outgoing TCP packets with the ERELIABLE attribute so that an underlying power-saving MAC protocol can treat them differently, because it knows that an ACK might be arriving soon
2009-04-29 11:40:33 +00:00
adamdunkels
92862ad2a5
Increased the number of iterations for ugly-hack-loop that checks if a transmission has started, to accommodate a faster CPU speed on the MSP430
2009-04-29 11:38:50 +00:00
adamdunkels
c9df0ab123
Bugfix in debug message printout
2009-04-28 14:01:46 +00:00
adamdunkels
81ef83b856
Added option to wait randomly before sending a packet. A few code cleanups. Avoid switching radio off when sending a packet with end-to-end acks, because an ACK may arrive shortly after the transmission.
2009-04-28 14:00:53 +00:00
adamdunkels
fdd05f5c71
Bugfix: psock send should use PT_WAIT_UNTIL() not PT_YIELD_UNTIL(). This improves TCP throughput by 100x under minimal-net
2009-04-28 13:52:04 +00:00
fros4943
7810d362a6
minor bugfixes: a rucb sender could not immediately after start receiving a bulk transfer
2009-04-16 14:32:01 +00:00
nvt-se
3f205a1413
reluctant gc will now wait until the sector has no free pages
...
before erasing the sector.
2009-04-13 22:26:31 +00:00
nvt-se
c0fb680f12
simplified code by using udp_broadcast_new.
2009-04-13 19:55:15 +00:00
nvt-se
9765df97e5
support udp_broadcast_new also when using IPv6. Suggested by Wolf-Bastian Pttner.
2009-04-13 19:54:07 +00:00
adamdunkels
ef4f5cc0e5
Made TCP MSS configurable
2009-04-10 00:37:48 +00:00
nifi
84b38de494
removed bitfields for compatibility with cc65
2009-04-09 21:54:09 +00:00
adamdunkels
f5f52ffd1f
Fixes by Ward Van Heddeghem (VUB)
2009-04-07 13:06:03 +00:00
nvt-se
03cd533712
made LISTEN_TIME and OFF_TIME configurable.
2009-04-07 11:29:08 +00:00
nifi
a3777852d4
* Corrected address for setting key 1
...
* Added missing include
2009-04-07 09:22:58 +00:00
adamdunkels
5e456aea7d
Added optimization for sending ACKs immediately. Turned optimizations on. Increased listening time to 1/64 s again due to problems with broadcasts with the 1/128 s setting
2009-04-06 22:50:35 +00:00
adamdunkels
ace6567815
Added a timer that randomizes the retransmission of an incoming new trickle version to avoid broadcast collisions
2009-04-06 21:20:35 +00:00
adamdunkels
be1c8ccec9
Added debug printouts
2009-04-06 21:19:34 +00:00
adamdunkels
d02ac74bbc
Increased size of temporary stack value to avoid overflowing when computation is done with 8-bit integers
2009-04-06 21:19:00 +00:00
adamdunkels
d298fcbbd0
Changed name of the internal struct memb_blocks to struct memb for consistency
2009-04-06 21:18:03 +00:00
nifi
000f740adc
typo
2009-04-06 15:54:07 +00:00
nifi
eab96e9b53
added rime-udp.c
2009-04-06 14:10:57 +00:00
nvt-se
d6869018c7
turned off debugging.
2009-04-06 13:27:37 +00:00
nifi
9f2ff48fda
added 802.15.4 frame packeter
2009-04-06 13:19:03 +00:00
nvt-se
3b2ad9cfc4
added packet forwarding and replaceable routing modules.
2009-04-06 13:18:50 +00:00
nvt-se
461ba4082c
in case UIP_CONF_ROUTING is set, check if we have a registered routing
...
module and use it for looking up the next hop of an address.
2009-04-06 13:18:12 +00:00
nvt-se
faf083f09d
save copy of a rime address that points to a packet buffer, since the
...
packet buffer is cleared and overwritten before the address usage is done.
2009-04-06 13:16:39 +00:00
nvt-se
c531f25c94
A module that enables Rime to run over UDP.
2009-04-06 13:13:26 +00:00
nvt-se
005578a722
added multihop routing support through replaceable modules. first implementation
...
uses rime's route discovery by translating between ipv6 and rime addresses.
2009-04-06 13:11:25 +00:00
nifi
4bc60d76d3
fixed alignment problem on MSP430 when using compression
2009-04-06 13:11:20 +00:00
adamdunkels
ed1e945e66
Added guard code so that OFF_TIME is never zero
2009-04-03 20:08:05 +00:00
adamdunkels
8dbd2b2337
Significant power consumption optimization: LPP now keeps track of encounters with neighbors and uses this information to keep the radio switched off longer.
2009-04-03 19:59:22 +00:00
adamdunkels
1d86b01bfb
Made optimizations explicit (and configurable). Added missing initialization of dutycycle protothread. Reduced default listen time and off time.
2009-04-03 11:45:06 +00:00
nvt-se
4507891ed5
made gc on removal configurable since it decreases wear levelling.
...
cleaned up some code.
2009-04-02 14:20:04 +00:00
nvt-se
1425537a13
Introduced two garbage collection mode: greedy and reluctant.
...
The greedy GC mode attempts to erase as many sectors as possible, and
it is therefore a slow operation, since the flash driver must wait
for about a second after erasing one sector. The former behavior was
to always do a greedy GC if file reservations fails due to lack of space.
The new reluctant GC stops after erasing one sector, and therefore
we often do not have to wait if there is no file system operation
in the time while the sector is being erased. We call the garbage collector
using this mode when removing a file that is not a micro log file, since
the remove function is called recursively for micro log files that are
erased because the corresponding ordinary file is erased.
This change increases the coffee test (examples/sky/test-coffee.c) speed
from 9 to 5 seconds.
2009-04-02 11:22:23 +00:00
adamdunkels
04101aae36
Fixed alignment problem on the MSP430, where the LPP header may be misaligned
2009-03-31 17:39:54 +00:00
nvt-se
e2cc8b2a3e
send all queued packet once we have the chance.
2009-03-31 14:44:13 +00:00
nvt-se
1d47e2a8da
send immediate probes only if the packet is directed to us.
...
sleep for OFF_TIME if the queue is empty.
restrict double packet lifetime timeouts to unicast packets.
stop ctimer in remove_queued_packet in case the function is not called
via the ctimer callback. it could overwrite a valid packet otherwise.
2009-03-31 14:11:25 +00:00
nvt-se
dd082f7fcf
improvements to lpp based on code from Adam and discussions with Thiemo.
...
* queue multiple packets
* send a strobe back immediately after receiving a data packet
* double the packet lifetime to allow for a missed probe
2009-03-31 12:47:00 +00:00
nvt-se
6a6bb53f2e
merged files must always inherit the old file end.
2009-03-26 15:57:52 +00:00
nvt-se
04ccf215e4
dereference gc_wait
2009-03-26 15:45:55 +00:00
nvt-se
d8caaca289
listen time and off time parameters configurable from outside because cc1020 needs longer listen time.
2009-03-26 12:50:57 +00:00
nvt-se
8785bee644
avoid repetitive garbage collection if no files have been deleted since
...
the last try.
2009-03-26 12:36:10 +00:00
fros4943
a9f0729f2c
forcing 16-bit aligned data memory
2009-03-26 12:25:05 +00:00
adamdunkels
cb4684d720
Bumped version number to 2.2.3
2009-03-24 14:09:22 +00:00
adamdunkels
73fdf05940
Added const to constant parameters (rime addresses)
2009-03-24 07:15:04 +00:00
adamdunkels
a625d80259
Added explicit typecast to buffer definition
2009-03-24 07:14:12 +00:00
adamdunkels
ec1677ca6c
Added a function (quick hack) that sets the radio transmission power of outgoing announcement packets in xmac
2009-03-23 21:06:26 +00:00
adamdunkels
1cbc0f4ea9
Send announcement packets only if there are any announcements to send
2009-03-23 21:00:25 +00:00
adamdunkels
f4b8680174
Defined the packetbuf buffer so that it is always aligned on a 16-bit boundary.
2009-03-23 19:37:45 +00:00
adamdunkels
39af9b361d
Fixed minor bug in comment
2009-03-23 16:39:09 +00:00
adamdunkels
21e0900d18
Made constant addresses const
2009-03-23 16:22:02 +00:00
adamdunkels
143bf11548
The multihop module used the pre-chameleon style packet headers. Converted it to use packet attributes instead of packet headers
2009-03-23 16:20:37 +00:00
adamdunkels
c791d851bb
Send an announcement packet only if there are more than zero announcemnets
2009-03-23 16:19:03 +00:00
nifi
91fa18e0e6
removed unused prototype
2009-03-23 10:58:00 +00:00
nvt-se
cc85a36722
use u8 when writing rime addresses.
2009-03-21 20:53:06 +00:00
nvt-se
bffbb06d4a
corrected GC page isolation loop.
...
adjusted cfs_coffee_reserve signature to use cfs_offset_t instead of uint32_t.
made cfs_coffee_format also to clear *next_free.
2009-03-20 15:15:43 +00:00
nvt-se
b7bdfe8daf
bugfixes:
...
* set invalid page on all removed files which have cache entries.
* update file cache entries earlier to prevent overwrites.
2009-03-19 20:44:43 +00:00
nvt-se
4b6c110706
fixed documentation typos.
2009-03-17 20:28:44 +00:00
adamdunkels
0076bfe8a5
Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy
2009-03-17 15:56:32 +00:00
nifi
f0e56df2eb
fixed compiler warning when timesynch is disabled
2009-03-17 09:57:01 +00:00
nvt-se
13b364bcc1
fixed documentation typos.
2009-03-15 20:29:04 +00:00
nvt-se
41ca9516a7
fixed documentation typos.
2009-03-15 20:21:16 +00:00
adamdunkels
fb8fab739a
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 23:04:52 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
adamdunkels
f634ccfb3d
Set transmission power based on packet attribute
2009-03-11 20:38:53 +00:00
adamdunkels
537219bf27
Added a packet attribute to specify transmission power on outgoing packets
2009-03-11 20:33:17 +00:00
zhitao
f304941ab4
raise busy forwarding flag before sending
2009-03-10 14:07:41 +00:00
julienabeille
2a173b465a
more printing in debug mode
2009-03-10 08:00:59 +00:00
zhitao
1eb085834f
Update announcement value after route metric saturates. Not doing this results in stubborn forwards from former children nodes.
2009-03-09 12:54:27 +00:00
adamdunkels
a1260c0c1f
Documentation updates
2009-03-08 21:43:24 +00:00
adamdunkels
366ad7bece
Added Rime documentation from the Rime/Chameleon paper (SenSys 2007)
2009-03-07 11:15:46 +00:00
zhitao
0a12098bd5
avoid ping pong packets during route disruption
2009-03-06 17:33:59 +00:00
adamdunkels
dc7491f810
Bugfix and optimization: X-MAC did not properly switch the radio off after sending a packet, resulting in increased power consumption. For packets that require an ACK, we can let the radio be on in anticipation of the ACK (controlled with an WITH_ACK_OPTIMIZATION option)
2009-03-05 19:37:52 +00:00
zhitao
64badeb282
bugfix: use memcpy() to get attributes longer than a byte properly written to packet header
2009-03-05 13:51:28 +00:00
zhitao
08b2315f41
bugfix: put up busy forwarding flag only after next hop found
2009-03-04 08:59:32 +00:00
fros4943
f701615afa
bugfix: remember active transmissions (sender side) instead of last received packets (receiving side). allows several nodes sending to a single receiver.
...
+ added function for checking if runicast is currently transmitting (non-acked) data
2009-03-03 12:19:46 +00:00
adamdunkels
9816f49fe6
Changed listen and transmit energy attributes so that they are named _TIME rather than _ENERGY, to indicate that they contain the time during which the radio was switched on and not the energy
2009-03-02 22:00:41 +00:00
adamdunkels
57b9cab27e
Set RSSI, correlation, and timestamp as packet attributes for incoming packets
2009-03-02 21:59:01 +00:00
adamdunkels
78591a003f
Minor documentation update
2009-03-02 21:56:16 +00:00
adamdunkels
45e32894a0
Bugfix: backwards definition of MIN macro (quite embarassing)
2009-03-02 11:22:09 +00:00
adamdunkels
d813d343c5
Cleaned up old left-over code
2009-03-01 20:38:57 +00:00
adamdunkels
7010eb84b8
Added support for communication power accounting. Energy is attributed to idle listening when the radio is switched off. Enegrgy is attributed to an incoming packet when it is received. Energy is attributed to an outgoing packet when it is transmitted.
2009-03-01 20:37:16 +00:00
adamdunkels
94c2c0ce85
Communication power accounting: this module keeps track of the energy expenditure of individial communication activities, such as transmission or reception of individual packets or idle listening.
2009-03-01 20:32:03 +00:00
adamdunkels
b8860727ac
A ring buffer library. The ring buffer library is useful in device drivers, where bytes can be safely written to the buffer from an interrupt handler, and read from non-interrupt code.
2009-03-01 20:23:56 +00:00
oliverschmidt
545c0c506e
Switched cfs offset type to signed int to allow backward movements with cfs_seek.
2009-03-01 12:28:39 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
adamdunkels
aa2f7a3399
Made polite announcement times configurable, added missing right-brace
2009-03-01 10:43:57 +00:00
adamdunkels
3adf8e5807
Call output packet sniffers after the MAC has sent the packet
2009-03-01 10:29:50 +00:00
adamdunkels
e78fd82f7d
Documentation bugfix: rtimer should be in sys group and the stimer library should have the correct documetation group
2009-03-01 09:31:43 +00:00
nvt-se
63b89a67fe
* cfs_opendir in Coffee now accepts any name.
...
* refer to the documentation of each whence parameter. Old documentation didn't consider negative movements either.
2009-02-28 13:40:25 +00:00
oliverschmidt
bc3d9d2e3c
Minor rearrangement.
2009-02-28 11:57:46 +00:00
oliverschmidt
938f151a66
Allow to override the whence macros individually - just like the open flags.
2009-02-28 11:39:02 +00:00
oliverschmidt
a7cb609321
With dynamic loading enabled the function ctk_textentry_input_null() lives in the persistent core while the macro CTK_TEXTENTRY() is typically used in loadable modules. So ctk_textentry_input_null() needs to be dynamically resolved.
...
On Win32 dynamic resolving isn't done by patching the dynamically loaded segments. Rather the code generated by the compiler for accessing symbols declared with __declspec(dllimport) is implicitly modified to actually go through pointer dereferenciations. The dynamic linker only initializes this pointers.
But with the symbol ctk_textentry_input_null becoming a pointer to a function it isn't a constant anymore and so it can't be used as initializer element - and thus breaking CTK_TEXTENTRY().
So the only viable solution seems to stick to the inversally available NULL pointer on Win32. But if there's an ugly #ifdef <platform> necessary anyway than it seems resonable to classify ctk_textentry_input_null as the special case and therefore use #ifdef SDCC:
- It saves some bytes on all non-SDCC platforms
- Is matches the exsisting inline documentation
2009-02-28 10:43:30 +00:00
nvt-se
aaa9d62304
fixed cfs_seek signature.
2009-02-27 14:52:52 +00:00
nvt-se
6615e39e27
switched unsigned int to cfs_offset_t
2009-02-27 14:50:35 +00:00
oliverschmidt
1d820bae87
Avoid compiler warning by returning a value from non-void function but no not avoid calling into the function now returning a meaningful value.
2009-02-27 14:42:49 +00:00
nvt-se
90e8016906
file end check must be against fdp->offset.
2009-02-27 14:35:12 +00:00
nvt-se
a0226e2418
switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET)
2009-02-27 14:28:02 +00:00
nvt-se
3191a2568c
Major API change:
...
1. Introduced a cfs_offset_t type that designates file offsets. unsigned int
was insufficient on several platforms with non-volatile storage that exceed
the capacity of unsigned int.
2. Switched cfs_seek signature to POSIX style with a "whence" parameter.
2009-02-27 14:25:37 +00:00
nvt-se
5e038640e2
fixed error in last commit: second character must terminate
2009-02-27 13:21:59 +00:00
nvt-se
a258be684f
permit the current directory name "." to be used in cfs_opendir.
2009-02-27 13:19:04 +00:00
nvt-se
2295df7246
The text suggested that only append operations were supported.
2009-02-27 10:54:08 +00:00
oliverschmidt
d816b712c3
Minimal reformatting only.
2009-02-27 08:18:54 +00:00
nvt-se
2e12c2408e
bug fix: removed possible null pointer dereference.
2009-02-25 23:59:26 +00:00
nifi
dee785ae88
added configuration of checksum and timesynch
2009-02-25 21:21:06 +00:00
adamdunkels
54fd65be5b
Added check for NULL textentry input, and a typecast to make cc65 happy
2009-02-25 10:34:47 +00:00
adamdunkels
45387fea3f
Removed leftover semicolon
2009-02-25 09:13:51 +00:00
adamdunkels
669bf3743e
Fixed function prototype so that it compiles again...
2009-02-25 09:01:38 +00:00
julienabeille
f95c5df7d9
The global prefixes processed must be one less than the total amount of prefixes, as the link local one occupies one slot
2009-02-25 08:35:52 +00:00
adamdunkels
e34e97cd6f
Minor code style fixes
2009-02-24 21:30:20 +00:00
adamdunkels
0ded8897e6
Added a dummy function instead of a NULL callback in the textentry widget because sdcc does not like NULL function pointers
2009-02-24 21:30:02 +00:00
nvt-se
bc7c90bb9f
doubled the speed of uncached file openings.
2009-02-22 15:19:31 +00:00
adamdunkels
bdc488c7f3
Removed PROCESS_ZOMBIE code, which does not compile with sdcc, added some optional debugging printouts
2009-02-20 21:24:17 +00:00
adamdunkels
2aedc8490d
Compile only if timesynch is enabled
2009-02-20 21:23:22 +00:00
adamdunkels
e6907a1d8b
Include random.h
2009-02-20 21:22:39 +00:00
adamdunkels
4ec5167276
Rewrote the tcpip_output() and tcpip_set_outputfunc() so that the latter is a proper function (which simplifies debugging) and so that tcpip_output() checks if the output callback function is NULL before calling it
2009-02-20 21:21:56 +00:00
julienabeille
10deaa6fc6
Removed CLOCK_SECOND from stimers in uIPv6, stimers are already in seconds
2009-02-20 07:59:35 +00:00
nvt-se
957ae56b13
broke out the essence of the search algorithm to a separate function.
2009-02-19 21:35:38 +00:00
julienabeille
710e5c621c
changed timer to stimer for neighbor, prefix, default router, address list
2009-02-19 16:42:41 +00:00
nvt-se
07c50cc200
corrected file cache status checks in previous commit.
2009-02-17 18:50:29 +00:00
nvt-se
d029dd8240
cleaned up mostly the GC code.
...
made EOF hints optional.
default build is now ~500 bytes smaller.
2009-02-17 16:56:32 +00:00
fros4943
97f76126e6
remembering last received packet id to avoid multiple recv callbacks for the same retransmitted packet (but still sending back acks of course)
2009-02-17 12:40:18 +00:00
c_oflynn
8516626703
Fixed documentation error (thanks to David Kopf)
2009-02-17 01:28:28 +00:00
adamdunkels
36bb3ece64
If no neighbor is found, we listen for announcements. Cleaned up debug output.
2009-02-16 01:18:53 +00:00
adamdunkels
aaa8c9d2c9
Construct the X-MAC header on the stack instead of directly in the packet header, because the packet header may be misaligned. A bit of cleanup in the code too.
2009-02-15 22:05:06 +00:00
adamdunkels
e4b1ff461e
Added MAC-layer announcement beacons to X-MAC. Configuratble through XMAC_CONF_ANNOUNCEMENTS
2009-02-14 20:35:03 +00:00
nvt-se
883d10e136
GC fix: isolated pages must always be allocated.
...
page allocation: increased utilization because the algorithm failed to
count all space before.
style: renamed and simplified some code and names.
2009-02-14 19:09:17 +00:00
nvt-se
b8f3dca765
fixed merge_log bug and space allocation error with isolated pages.
2009-02-12 11:24:22 +00:00
adamdunkels
13a3029435
Rewrote the random_rand() pseudo random number generator to use the libc rand() function instead
2009-02-11 11:09:59 +00:00
adamdunkels
585620c102
Reverted the recent change from random_rand() to rand(). It turned out that
...
since libc rand() returns a signed int, there were frequently problems with
timer values wrapping. By reverting to random_rand(), we can provide a
random generator that returns an unsigned and the timer problems are solved.
2009-02-11 11:08:53 +00:00
adamdunkels
9d75781a78
Added packet attributes for energy spent on a packet (RIMEBUF_ATTR_LISTEN_ENERGY and RIMEBUF_ATTR_TRANSMIT_ENERGY)
2009-02-10 23:51:12 +00:00
adamdunkels
b15198b9a8
Bugfix: the Chameleon header parser modules should not clear the packet attributes, because the MAC or radio layers may have added attributes already
2009-02-10 23:49:58 +00:00
adamdunkels
e1ef13dad6
Reduced the size of the packet cache from four to two to avoid falseley dismissing fresh packets (the header field that hold sequence numbers is only two bits wide, hence all sequence numbers fits in a four-entry cache...)
2009-02-10 00:44:50 +00:00
adamdunkels
6c95bd895a
Added default initialization of polite announcements. Not sure where the best place for this is, but this at least allow us to start experimenting with this.
2009-02-09 22:05:33 +00:00
adamdunkels
3efb83c338
Added announcement includes
2009-02-09 21:09:42 +00:00
adamdunkels
0de445e035
Initialize the announcement module
2009-02-09 21:08:12 +00:00
adamdunkels
3670ef2f44
Rewrote the collect module so that it uses the announcement module rather than the neighbor-discovery module. This makes it possible to implement other annoumcement back-ends than the traditional broadcast-based neighbor discovery
2009-02-09 20:58:25 +00:00
nvt-se
98f7f9a06a
sizeof on coffee_fd_set is no longer suitable since it has become a
...
pointer.
2009-02-09 12:02:10 +00:00
fros4943
4f7f3c97b5
* added coffee_files to the protected memory needed during cfs-based checkpointing operations
...
* renamed cfs_coffee_get_fd_set() to cfs_coffee_get_protected_memory() to highlight that not only fd_set is protected
2009-02-09 10:08:26 +00:00
adamdunkels
dd9ffd87c4
Added missing #include announcement.h
2009-02-08 20:14:18 +00:00
adamdunkels
085df6b630
Improved version of LPP with support for broadcasts as well as announcement data in the probes
2009-02-08 19:30:18 +00:00
nvt-se
d0a546b049
A long refactoring session yielded the following.
...
Technical changes:
* Factored out file specific information from the file descriptor
structure into a new file structure.
- Useful file metadata can be stored after the file is closed.
- File descriptors become much smaller.
- Significantly reduces the need to scan for the file end.
* Use correct types in all function signatures.
* Removed the directory cache.
Results:
* Enormous speed increase when opening cached files (10x-20x.)
* Multiple fd:s pointing to the same file have the correct semantics.
* About 100 bytes smaller ROM size.
* Slightly smaller static RAM size.
2009-02-08 17:08:13 +00:00
adamdunkels
91d280c4c9
Reverted to the old behaviour on broadcasts: send strobes for both unicast and broadcast packets.
2009-02-07 18:45:50 +00:00
adamdunkels
4b71003c2f
Changed from random_rand() to rand() for better pseudo randomness
2009-02-07 18:43:45 +00:00
adamdunkels
752291f450
Changed from random_rand() to rand() function for (pseudo) random numbers because random_rand() does not work that well
2009-02-07 16:16:31 +00:00
adamdunkels
91e8487032
Added Doxygen documentation
2009-02-07 16:15:37 +00:00
adamdunkels
be846d8c90
A new experimental network primitive called an 'announcement'. An
...
announcement is an (ID, value) tuple that is disseminated to local
area neighbors. An application or protocol can explicitly listen to
announcements from neighbors. When an announcement is heard, a
callback is invoked.
Announcements can be used for a variety of network mechanisms such as
neighbor discovery, node-level service discovery, or routing metric
dissemination.
Application programs and protocols register announcements with the
announcement module. An announcement back-end, implemented by the
system, takes care of sending out announcements over the radio, as
well as collecting announcements heard from neighbors.
2009-02-05 19:32:01 +00:00
fros4943
bf39076206
added experimental checkpointing functionality:
...
currently only implemented on the sky platform
2009-02-04 17:49:15 +00:00
nvt-se
fda75c4c08
Use the right type for pages in the directory cache. This makes the
...
cache much smaller on most platforms.
2009-02-03 16:21:53 +00:00
nvt-se
4b56200586
documented the new function that helps sensornet checkpointing to protect
...
file descriptors while rolling back state.
2009-01-29 18:24:58 +00:00
adamdunkels
e346d8cf95
Reverted the timer_expired() back to the previous version (which should be correct). Removed the definition of CLOCK_LT() because it seems to only cause problems.
2009-01-24 15:20:11 +00:00
adamdunkels
3a4a961ff5
Fixed the CLOCK_LT again. The previous revert was incorrect: the conditional was missing due to a bad copy-and-paste on my part :(
2009-01-24 10:54:44 +00:00
fros4943
8f462b9a52
zeroed debug flag
2009-01-23 17:28:09 +00:00
adamdunkels
6cbe50d9ef
Fixed missing parenthesis
2009-01-23 17:16:38 +00:00
fros4943
7e5047012b
added function for getting coffee's fd_set address and size
2009-01-23 16:27:49 +00:00
adamdunkels
b258a99e22
Reverted CLOCK_LT to the previous version, which upon closer examination seems to be correct. The new version did not work correctly on the minimal-net platform.
2009-01-23 16:13:57 +00:00
fros4943
4f1a9d3c75
bugfix: stopping timeout timer when we receive route reply (still limited to only one active discovery)
2009-01-21 14:29:24 +00:00
adamdunkels
71e5adb254
Moved packet attributes specifications from rimebuf.h to the appropriate protocol header files
2009-01-15 22:15:51 +00:00
fros4943
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
nvt-se
9d7e9fe297
reduced code size by removing some unnecessary statements.
2008-12-18 15:49:43 +00:00
joxe
d2dc732435
changed list_pop to return removed element
2008-12-16 09:59:42 +00:00
nvt-se
f041a2eada
fixed compilation error when debug flag was set.
2008-12-12 10:23:49 +00:00
c_oflynn
5ec6412fbc
*Support for Atmel 'Router Under Mac' (RUM) in Jackdaw
2008-12-10 21:26:05 +00:00
nvt-se
532ebc1e9a
reduced the code size by 200 bytes.
...
fixed an EOF hint bug that occured when files where extended.
2008-12-09 16:01:18 +00:00
c_oflynn
17790ce46a
Bug fix by David Kopf - sicslowpan timeout was always set at 20 seconds, this greatly improves performance!!
2008-12-02 22:04:16 +00:00
nvt-se
8c608efea4
added file removal capability to xmem fs
2008-11-30 22:42:40 +00:00
adamdunkels
50b1e60621
Rewrote the rimeaddr_copy() loop to use the ->u8 field instead of the ->u16 field (which now finally is removed)
2008-11-30 18:26:57 +00:00
adamdunkels
6951d9d582
Removed the unused ->u16 field (it was there only as a convenience/laziness access method during the initial development of the Rime stack, but has caused problems when being there)
2008-11-30 18:26:06 +00:00
adamdunkels
589a03b0e5
Added fallback #define of CH_ENTER
2008-11-27 23:40:24 +00:00
zhitao
ae271a7f2f
replaced the TMOTE_SKY macros with CONTIKI_TARGET_SKY, in conformance to the latest target hint rules
2008-11-25 09:20:54 +00:00
nvt-se
15e8675ab9
Added file removal function to the CFS API. Only cfs-coffee and cfs-posix
...
implements this, whereas the others just return -1.
2008-11-24 10:56:55 +00:00
nvt-se
a59cbaf19f
removed redundant code.
2008-11-19 14:39:08 +00:00
nvt-se
5fe2c34038
- important bug fix regarding writing after a merge log operation: parameters
...
must be restored.
- fixed watchdog problem in reserve
2008-11-19 13:42:07 +00:00
nvt-se
c4a5010c46
break out eof update functionality since its now needed at more than one
...
place.
2008-11-18 23:10:30 +00:00
oliverschmidt
7cf3165155
Replaced NETSIM macro with general (and now actually working) solution in Makefile.include.
2008-11-17 22:52:10 +00:00
nvt-se
3c0d67c14f
simplified complex functions through abstractions.
...
switched base offset to coffee_offset_t type.
2008-11-17 14:37:23 +00:00
nvt-se
25a73a43dc
loop parameter must be signed in case batch_size is 0.
2008-11-17 10:34:57 +00:00
nvt-se
5fc9534188
reuse merge_log to also do file extensions.
2008-11-17 09:09:17 +00:00
nvt-se
2ec836f1f9
function argument should be a pointer
2008-11-13 14:46:32 +00:00
nvt-se
4e2d39546b
removed debug output.
2008-11-13 00:58:51 +00:00
nvt-se
a06ad707ee
corrected EOF hint calculation.
2008-11-13 00:58:13 +00:00
fros4943
e42d572f81
updated for latest mac driver structure
2008-11-12 12:42:41 +00:00
zhitao
229d60d691
Neighbor ETX should accumulate over retransmission timeouts;
...
Best neighbor has minimum sum of routing metric and neighbor ETX. Previously best neighbor prioritizes routing metric before neighbor ETX, which often causes a poor neighbor with a good upstream path to be selected.
2008-11-12 10:47:17 +00:00
nvt-se
28ed5e2a4a
- Added passive directory cache filling.
...
- Improved variable naming.
- Cast unknown integer type parameters to format type for printf calls.
2008-11-10 23:07:53 +00:00
adamdunkels
ceb2554d2f
Enabled the SHT11 register readout to allow reading the low-voltage indicator bit
2008-11-10 21:10:36 +00:00
oliverschmidt
75ffd0640c
Inform user about (most likely unintentional) call of dummy_tcpip_output_function.
2008-11-10 21:00:53 +00:00
adamdunkels
3b283a5ff3
Added dummy function so that tcpip_output() always is defined, even if tcpip_set_outputfunc() never has been called. This fixes a bug with programs attempting to use the network when compiled for the native platform.
2008-11-09 12:29:24 +00:00
adamdunkels
312afede00
Bumber version number to 2.2.2
2008-11-09 12:28:28 +00:00
adamdunkels
5243d58ac5
Added logic for announcing that a network has a gateway to the outside world (with the function uip_over_mesh_make_announced_gateway()). The announced gateway sends a trickle message to the network, containing the address of the gateway. Other nodes will then know that packets destined to the outside world should go through the gateway node.
2008-11-09 12:20:56 +00:00
adamdunkels
8851a6359a
Remove unguarded printf()
2008-11-09 12:16:05 +00:00
oliverschmidt
28889f2210
Commented out otherwise unguarded printf().
2008-11-06 23:15:58 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
adamdunkels
a42311dc7e
Only process incoming data if the process is polled. Compile checksum checks only for IPv4.
2008-11-06 08:18:29 +00:00
nvt-se
da7877e8ab
corrected macro name
2008-11-05 19:34:36 +00:00
nvt-se
a1ea7cbe3e
generalized log buffer adjustments into functions. simplified next_log_record
...
usage.
2008-11-04 23:30:47 +00:00
nvt-se
6ca91f1271
revoked accidental renaming om dir cache entries.
2008-11-04 23:12:44 +00:00
nvt-se
e6a7089942
refactored the code and reduced the ROM size a few dozen of bytes
2008-11-04 23:09:55 +00:00
nvt-se
ae8c93d0aa
cut 500 bytes of ROM size.
2008-11-04 17:48:36 +00:00
nvt-se
1309cb474d
removed redundant code
2008-11-04 17:23:59 +00:00
nvt-se
becfecfe1b
reduced rom size by ~40 bytes
2008-11-04 16:58:52 +00:00
nvt-se
a6a17bc52c
optimized the merge log operation and fixed a fd update bug.
2008-11-04 15:49:54 +00:00
nvt-se
71d01a44a1
adjust read chunk size according to log entry size
2008-11-03 20:21:43 +00:00
nvt-se
fff8b46110
fixed a buffer bug with the micro logs
2008-11-03 16:58:18 +00:00