adamdunkels
a9c742402c
Use cxmac for IP, xmac for non-IP. Increased uIP buffer size for IPv6 to accomodate ICMP packets
2010-02-03 16:48:04 +00:00
adamdunkels
f63f6a7a88
Added default configuration options for the cxmac driver
2010-01-31 18:48:41 +00:00
adamdunkels
ba2c445676
Reduce the TCP MSS so that it runs nicely over IPv6/802.15.4
2010-01-28 13:38:40 +00:00
adamdunkels
5922402b3e
Added the CSMA MAC mechanism on top of the default duty cycling
...
mechanism X-MAC. The CSMA is configurable with a MAC_CSMA define, just
like the MAC protocol is configurable with the MAC_DRIVER define.
2010-01-25 11:48:16 +00:00
nifi
467df8ad4c
reverted accidental commit
2010-01-14 22:26:38 +00:00
nifi
dbe56e4666
Updated to match the new sensors API
2010-01-14 20:01:18 +00:00
joxe
3c0dcb45c7
fixed for updated sensors API
2010-01-14 15:50:13 +00:00
fros4943
99a540fd0d
macro renamed to SPI_IS_ENABLED() to avoid confusions
2009-10-27 15:33:24 +00:00
fros4943
6b36cd9de9
added macro for checking whether SPI is ENABLED
2009-10-27 15:25:02 +00:00
adamdunkels
79d7c366a3
Rime polite announcements should be used when IPv6 is enabled, and not used otherwise
2009-10-18 07:15:33 +00:00
nifi
d4b619bcc5
Renamed SPI_WAITFOREOTxBUF to SPI_WAITFORTxREADY for clarity and generalized SPI transmission status checks to work with both AVR and MSP430
2009-09-07 11:31:26 +00:00
nifi
3a8ee769cb
Changed to monitor the UART transmitter buffer ready flag instead of the UART transmitter empty flag. This almost doubles the speed of transmitting data to CC2420. Patch by James Brown.
2009-08-31 12:06:34 +00:00
nifi
05d4bc4532
allow UIP_CONF_ROUTER to be set as compilation flag
2009-06-29 09:54:39 +00:00
joxe
1cc33ac451
configured routing to off for sky-IPv6
2009-06-26 12:01:23 +00:00
nvt-se
b912a41ea3
use polite announcements when running Rime over UDP.
2009-06-24 16:44:26 +00:00
nifi
912aba7280
added init function in MAC driver for easier configuration
2009-06-22 11:14:11 +00:00
fros4943
d54176205c
decreased default elfloader memory usage for sky platform
2009-05-18 10:32:56 +00:00
adamdunkels
900480959b
Increased the default number of queue buffers: there usually is plenty of RAM left, so we should be able to afford it
2009-05-10 21:15:16 +00:00
adamdunkels
064f4488d4
Increase default CPU speed from 2.4576 MHz to 3.9 MHz. Communication works better, at a low power cost
2009-04-29 11:43:48 +00:00
fros4943
bc6704079c
cc2420 checksums temporarily disabled, due to timing problems with the x-mac unicast optimization
2009-04-16 14:34:51 +00:00
adamdunkels
3415ff26bd
Added CC2420 checksums to non-ipv6 packets. Set a conservative TCP MSS
2009-04-10 00:39:19 +00:00
nifi
b41b79e3a9
Disable timestamp when using 802.15.4 frames (CC2420_CONF_TIMESTAMPS adds timestamp to radio packets).
2009-04-06 17:18:20 +00:00
nifi
900d8d8e17
changed to use HC01 compression for uip6
2009-04-06 16:01:11 +00:00
nifi
8b41f3a6a8
set rime addr size to 8 for uip6, restored clock resolution
2009-04-06 14:59:49 +00:00
nifi
a36e529df1
added configuration for panid
2009-04-06 13:31:00 +00:00
nvt-se
f53560f6a5
enabled multihop routing, increased uip buffer size.
2009-04-06 13:23:14 +00:00
nifi
c1d490b6a7
added workaround for memcpy/memset bug in mspgcc
2009-04-06 13:07:37 +00:00
adamdunkels
58331e6802
Made tick resultion more fine-grained to support a shorter LPP listen time
2009-04-03 11:46:48 +00:00
adamdunkels
65eb5fd4e8
Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it).
2009-03-12 21:58:20 +00:00
julienabeille
0395ff5f39
sicslowpan Typo
2009-03-09 08:19:07 +00:00
adamdunkels
e3043b1be2
Enable communication power accounting for xmac by default
2009-03-01 20:43:37 +00:00
nvt-se
47d70f2ae3
Switched name to CFS_CONF_OFFSET_TYPE to emphasize that it is a configurable option.
2009-03-01 12:00:00 +00:00
nvt-se
b47221672a
switched cfs offset type to signed long to allow backward movements with cfs_seek.
2009-02-28 13:41:16 +00:00
nvt-se
9f8f773b43
use unsigned long as cfs offset type.
2009-02-27 14:53:15 +00:00
adamdunkels
d761dfebd1
Bugfix: reduced the size of the uIP buffer to account for MAC header space
2009-02-25 10:23:03 +00:00
adamdunkels
7781bbea58
Enabled X-MAC announcements by default, disabled polite broadcast announcements by default
2009-02-14 22:52:24 +00:00
joxe
9689a579be
added DCO/CPU speed re-synch each 30 seconds
2009-02-04 19:32:20 +00:00
fros4943
5f3c1a0e12
elfloader executing loaded programs from ram (not rom) by default on msp430 platforms.
2009-01-15 09:04:04 +00:00
nvt-se
0c4f7bed8f
temporary fix to get sicslowpan.c working on the Sky platform:
...
conventional MAC implementations require a call to the MAC driver's
read function.
2008-11-06 20:45:06 +00:00
nvt-se
21e4b4be80
map rime address to mac address for ipv6
2008-11-06 15:14:24 +00:00
nvt-se
d1d09ea1fd
added IPV6 configuration.
2008-11-05 14:31:06 +00:00
adamdunkels
28331191b3
Changed name of simple-cc2420 to cc2420
2008-07-02 09:38:06 +00:00
adamdunkels
1586d8f36f
Changed filename of the CC2420 driver from simple-cc2420 to cc2420.
2008-07-01 21:02:51 +00:00
adamdunkels
31ea41d8db
Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level
2008-05-14 19:19:28 +00:00
adamdunkels
412facb831
This is an initial commit of an implementation of the Chameleon
...
architecture for the Rime stack for Contiki. The Chameleon
architecture separates the header processing from the Rime protocol
logic. Instead of having each protocol create its own part of the
packet header, protocols use packet attributes. Before sending a
packet, a special Chameleon header processing module creates a packet
header from the packet attributes. The same Chameleon module parses
incoming packets and creates packet attributes from the header.
The details are in our SenSys 2007 paper:
Adam Dunkels, Fredrik Osterlind, Zhitao He. An Adaptive Communication
Architecture for Wireless Sensor Networks. In Proceedings of the Fifth
ACM Conference on Networked Embedded Sensor Systems (SenSys 2007),
Sydney, Australia, November 2007.
http://www.sics.se/~adam/dunkels07adaptive.pdf
This is a rewrite of the code that was developed for the paper.
2008-02-25 02:14:34 +00:00
adamdunkels
5bcd0ab60b
Reduced uIP buffer size to allow for TCP data over Rime mesh routing protocol
2008-02-24 21:11:35 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
2b4f33a4dd
Enabled support for CC2420 timestamps
2007-12-16 15:05:04 +00:00
adamdunkels
f1271464fd
Turned on energy estimation and profiling by default
2007-11-13 21:10:50 +00:00
adamdunkels
0ce1708c76
#ifdef around RF_CHANNEL
2007-11-06 20:28:09 +00:00
nifi
9d75d6d153
enabled inline functions
2007-09-19 14:09:31 +00:00
bg-
a20c9e6abb
* Include msp430def.h for standard defines.
...
* Remove obsolete LPM_CONF_OFF definition.
2007-08-16 13:10:53 +00:00
adamdunkels
1f835946ca
Added X-MAC configuration, reduced ELF loader text memory size
2007-05-22 21:12:15 +00:00
oliverschmidt
4fd1e3ece0
Added signed 32 bit data type.
2007-05-12 20:58:12 +00:00
bg-
b32db9763e
* Bump maximum number of udp sockets to 16.
...
* Remove unused stuff.
2007-04-11 15:22:05 +00:00
bg-
48c5cae451
* More routing and forwarding cache entries.
2007-04-04 11:39:49 +00:00
adamdunkels
913e33c434
Increased RAM for loadable modules
2007-03-25 21:54:06 +00:00
nifi
52b9210b57
added cfs xmem size
2007-03-23 12:15:50 +00:00
nifi
54228ae6e4
Node IDs are stored in external memory and restored on bootup
2007-03-23 09:59:08 +00:00
adamdunkels
4d9a716a50
ELF loader memory size, CFS RAM memory size
2007-03-23 00:00:15 +00:00
adamdunkels
70c1652c13
Added CFS xmem conf
2007-03-21 23:26:25 +00:00
adamdunkels
9adc7dc49b
Added LPM and IRQ configuration to make Tmote Sky port build with the Contiki build system
2007-03-15 21:59:44 +00:00
bg-
429d41defd
* General stuff for different baudrates:
...
- ubr argument to slip_arch_int
- macros for calculating ubr
- argument -Bbaudrate to tools tunslip and scat
2007-02-02 13:26:48 +00:00
bg-
26f9d3847b
* Tmote sky has a CC2420_RADIO.
2007-01-24 16:31:40 +00:00
oliverschmidt
62fa3b8c01
Changed the Contiki Interface declaration macros from CCI/CLI to CCIF/CLIF because of already existing macros: Both CCI and CLI :-(
2006-08-15 14:46:33 +00:00
oliverschmidt
48609fb3a3
Added defines for declaring functions/data which are part of the CCI (Contiki Core Interface) and CLI (Contiki Loadable Interface). Both defines are empty for all platforms but the upcoming Win32 port.
2006-08-13 15:06:08 +00:00
bg-
0bf3db5df7
Make malloc machine independent by relying on dependent sbrk(2).
2006-08-11 13:41:31 +00:00
bg-
7b791de692
Import of files for the Tmote sky platform.
2006-08-02 14:44:46 +00:00
