Commit graph

2550 commits

Author SHA1 Message Date
Toni Lozano a81b4007b0 Allow to use up to 6xADC channels (now hardcoded), disabling the user button
(PA3) if ADC6 is enabled
2016-04-04 10:48:43 +02:00
Marko Gucanin 1818700bde JN516x clock module sign error fix 2016-03-31 13:51:03 +02:00
Oliver Schmidt 7a5249b066 Added a Contiki version of the CBM exec() system file; it uses PFS instead of POSIX.
It reduces the webbrowsers' size by 735 bytes.
2016-03-28 20:03:47 +02:00
Oliver Schmidt 4f28289df2 Added a pfs_remove() function and a pfs_seek() stub to the Commodore platforms.
- "Normalized" some Assembly code.
- Implemented CFS_APPEND in pfs_open().
- Made CFS_WRITE work in VICE's virtual disk/file system.
2016-03-28 14:07:35 +02:00
Michael LeMay 93126b57bb x86, galileo: Use IMRs to restrict DMA
This patch configures Isolated Memory Regions (IMRs) to block DMA to
code and data regions that do not contain any data that needs to be
DMA-accessible.
2016-03-17 08:35:49 -07:00
Michael LeMay 58a00b7c23 x86, galileo: Add driver for Isolated Memory Regions (IMRs)
The Intel Quark X1000 SoC includes support for Isolated Memory Regions
(IMRs), which are specified using range registers and associated
control registers that are accessible via the message bus.  This patch
adds a driver for accessing those registers.
2016-03-17 08:35:49 -07:00
Michael LeMay 25c07613c2 x86: Add driver for message bus
The Intel Quark X1000 SoC includes a message bus that is accessible
via PCI configuration registers.  It communicates to various SoC
components such as the Isolated Memory Region (IMR) registers and the
Remote Management Unit.  This patch adds a driver for accessing the
message bus.
2016-03-17 08:35:48 -07:00
Nicolas Tsiftes 9ab327090c Merge pull request #1444 from mdlemay/galileo-always-init-gpio
galileo: Enable I2C and GPIO interrupt sharing and centralize their initialization
2016-03-14 20:09:40 +01:00
Nicolas Tsiftes 862e43d9b0 Merge pull request #1523 from Zolertia/pull/z1-apify-sensors
Adapt Z1 on-board sensors to Contiki's API
2016-03-14 17:10:46 +01:00
Simon Duquennoy 1ffbafeaa6 Merge pull request #1375 from myrfy001/myrfy001-patch-1
off_t changed to signed to stay the same as POSIX
2016-03-14 16:42:13 +01:00
Simon Duquennoy dea04c67d7 Change the default IPv6 prefix from aaaa::/64 to fd00::/64 2016-03-07 17:47:44 +01:00
Oliver Schmidt 8b3d220761 Merge pull request #1542 from oliverschmidt/master
Adjusted segment names to match recent cc65 change.
2016-03-06 21:29:50 +01:00
Oliver Schmidt 6876b97466 Adjusted segment names to match recent cc65 change. 2016-03-06 21:11:18 +01:00
Nicolas Tsiftes fbf3aba152 Merge pull request #1513 from mdlemay/check-newlib-conf
galileo: build_newlib.sh: Exit on configuration error
2016-03-03 13:39:27 +01:00
Nicolas Tsiftes da5044acb2 Merge pull request #1514 from mdlemay/newlib-filter-patches
galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
2016-03-03 13:38:56 +01:00
Aitor Mejias 56aeb7cd7e Added Zolertia Zonik sound sensor test and drivers 2016-02-22 16:49:35 +01:00
Antonio Lignan 934cdbacca Adapted the ADXL345 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Antonio Lignan 1be30d52dc Removed unused blocks and made functions static 2016-02-22 12:08:56 +01:00
Antonio Lignan 151f532225 Adapted the TMP102 sensor to Contiki's sensor API 2016-02-22 12:08:56 +01:00
Michael LeMay 58874ea25d x86, galileo: Refactor I2C and GPIO initialization
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.

This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration.  Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay c815fa4511 x86: Use shared ISR for I2C and GPIO
This patch permits interrupts to be generated by both the I2C and GPIO
controllers for simultaneously-executing applications. The controllers
share a single interrupt pin, INTC. Prior to this patch,
quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an
incorrect assumption that INTA is connected to the GPIO controller),
and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C
controller initialization is a prerequisite for GPIO initialization,
so the final configuration was that INTA and INTC were both routed to
PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if
the I2C controller was actually responsible for the interrupt.

This patch refactors the I2C and GPIO ISR setup and handler code so
that the shared portions are combined in
cpu/x86/drivers/legacy_pc/shared-isr.[ch].  The I2C and GPIO drivers
communicate their interrupt information to the shared component by
placing structures in a specific section of the binary.
2016-02-16 21:19:44 -08:00
Michael LeMay 66629ae58f galileo: build_newlib.sh: Exit on configuration error
This patch adds a check for the result of the newlib configure command
and immediately exits the build_newlib.sh script if configure fails.
2016-02-16 11:36:57 -08:00
Toni Lozano 2cbde75b02 Removed PM10 code lines from adc-sensors driver 2016-02-15 14:45:26 +01:00
Antonio Lignan 0dbed519a5 Merge pull request #1507 from Zolertia/remote-voc-test
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias cb1e7c2c45 Added VOC (iAQ-Core) drivers and test application 2016-02-15 11:00:48 +01:00
Antonio Lignan 25ff850a43 Weather meter: replaced rtimer by ctimer as it was breaking contikimac 2016-02-13 22:33:05 +01:00
Michael LeMay 16145f645a galileo: build_newlib.sh: Only apply patch files with the extension ".patch"
This avoids treating as patches other files that may happen to be
present in the newlib patch directory in a working tree.
2016-02-12 13:45:25 -08:00
Simon Duquennoy ebdc536d61 Merge pull request #1496 from simonduq/pr/jn516x-serial-input
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Simon Duquennoy f87f7e7edd jn516x enable serial input whenever there is no fallback interface 2016-02-03 17:53:29 +01:00
Simon Duquennoy 658cf0d2cc Reworking jn516x default configuration and examples 2016-02-03 10:35:48 +01:00
Nicolas Tsiftes eef96f3ba7 Merge pull request #1480 from mdlemay/revise-clang-flags
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Simon Duquennoy 7c3108bf3b jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact 2016-02-01 13:36:18 +01:00
Antonio Lignan 35345cdb40 Fixed casts and calculations for the wind direction circular averaging 2016-01-31 22:51:08 +01:00
George Oikonomou 7d6966b22c Merge pull request #1483 from Zolertia/pm10-sensor
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
Toni Lozano 1f6dafecb0 Modified ADC measurement of PM10 driver to include adc-zoul direct access 2016-01-26 17:55:48 +01:00
Antonio Lignan 8337843d69 Minor fixes 2016-01-26 09:45:43 +01:00
Michael LeMay 6557194fc5 galileo: Revise include flags for LLVM Clang
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan 9f1376d37a Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano 31e6cc48ca Solved doxygen comments information from VAC, AAC and PM10 sensor files 2016-01-25 18:13:00 +01:00
Toni Lozano 42e1beb931 Added PM10 GP2Y1010AU0F sensor driver and demo test 2016-01-25 10:06:17 +01:00
Toni Lozano 4907842821 Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results 2016-01-25 10:05:43 +01:00
Toni Lozano 1fca3e810a Added PM10 and VAC parameters to adc_sensors driver 2016-01-25 10:04:25 +01:00
Antonio Lignan d4251d7c3b Merge pull request #1470 from alignan/pull/grove-rgb-backlight-lcd
Ported Grove LCD with RGB backlight for the Zoul platforms
2016-01-25 09:54:25 +01:00
George Oikonomou 9e9e6d07b0 Adjust READMEs to point explicitly to the arm-gcc version used by travis 2016-01-24 13:59:19 +00:00
Antonio Lignan 9a5682b75b Merge pull request #1476 from alignan/pull/update-weather-meter
Updated to new adc-zoul renaming
2016-01-23 16:20:22 +01:00
Antonio Lignan 246b01095f Ported Grove LCD with RGB backlight for the Zoul platforms 2016-01-23 15:52:29 +01:00
Antonio Lignan 66ebca3ade Updated to new adc-zoul renaming 2016-01-23 15:42:13 +01:00
Antonio Lignan 9a80c0098f Added zero-calibration function and added offset values to the structure 2016-01-22 16:58:46 +01:00
Antonio Lignan 426fa24e50 Clear interrupt and trigger callback if new data is generated 2016-01-22 16:58:46 +01:00
Antonio Lignan f5b52e8094 Ported Grove's 3-axis gyroscope sensor (based on ITG-3200) 2016-01-22 16:58:46 +01:00