c_oflynn
9f6a069f96
New USB IPv6 address translation, works better with bridges. Enabled by a #define at start of sicslow_ethernet.c
2010-01-24 14:14:13 +00:00
adamdunkels
11362d0489
Remove the default list of sensors from the main() file to save space - those apps that need them can use them directly in any case
2010-01-21 11:17:08 +00:00
nifi
c9a48aa752
Updated to match the new sensors API
2010-01-15 21:37:15 +00:00
nifi
a7f8761978
Updated to match the new sensors API
2010-01-15 10:34:36 +00:00
adamdunkels
2f19892f74
Updated with the new sensors API
2010-01-15 08:50:39 +00:00
nifi
467df8ad4c
reverted accidental commit
2010-01-14 22:26:38 +00:00
nvt-se
d2655eac7a
make watchdog management slightly more abstract to simplify porting
2010-01-14 21:16:58 +00:00
adamdunkels
46753473fa
Added constants for light sensor values
2010-01-14 20:23:02 +00:00
adamdunkels
9ae29c3be5
Added light, sht11, battery sensors; restored light and battery activation since rtimers don't work without them (at present)
2010-01-14 20:18:23 +00:00
adamdunkels
bb63085f60
Added SHT11 sensor API for Tmote Sky
2010-01-14 20:16:52 +00:00
adamdunkels
4f6f6c972d
Use new sensors API
2010-01-14 20:15:55 +00:00
nifi
00e8164e58
updated vibration sensor name to Contiki standard
2010-01-14 20:02:55 +00:00
nifi
dbe56e4666
Updated to match the new sensors API
2010-01-14 20:01:18 +00:00
nifi
4ffa7b95b7
Updated to match the new sensors API
2010-01-14 19:19:50 +00:00
nifi
7154b4c68d
Removed references to irq, which is not used with the new sensor APIs
2010-01-14 19:14:47 +00:00
nifi
2a7ad011c5
Updated to match the new sensors API
2010-01-14 19:12:31 +00:00
nifi
e1c6c4993a
Removed references to irq, which is not used with the new sensor APIs
2010-01-14 18:13:33 +00:00
nifi
24f28f0f1c
Updated to match the new sensors API
2010-01-14 17:39:35 +00:00
joxe
071a9eaa6b
adapted for new sensor APIs
2010-01-14 16:13:45 +00:00
nifi
e0c0808767
removed obsolete file
2010-01-14 15:55:15 +00:00
joxe
3c0dcb45c7
fixed for updated sensors API
2010-01-14 15:50:13 +00:00
adamdunkels
fe126bc90e
Updated to match the new sensors API
2010-01-14 15:38:56 +00:00
nifi
4d03a30456
removed obsolete file (available in core/dev)
2010-01-14 14:00:45 +00:00
joxe
31ea888b75
fixed Sky platform for new sensor APIs
2010-01-14 14:00:38 +00:00
joxe
4a3953204f
changed sky sensors to new api
2010-01-14 13:53:06 +00:00
matsutsuka
23d5f84a46
Workaround for compiling some examples available
2009-12-16 06:47:17 +00:00
matsutsuka
a628b0c581
minor aesthetic modification
2009-12-11 15:00:38 +00:00
matsutsuka
1586b3b5c4
fixed minor bug of mt-test due to sdcc
2009-12-11 14:59:45 +00:00
matsutsuka
ebe74fed56
size-optimization option and peep-hole optimizer have been introduced.
...
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels
e3fed27f4a
Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files
2009-12-05 19:42:56 +00:00
nifi
3c1a7f3bc7
* Added configuration for radio receive buffer size (default Rime packet size)
...
* Added configuration for beep on bad crc
* Changed to drop packet if read buffer is too small rather than truncating data
* Turn off energest-listen during transmission
2009-11-19 18:04:02 +00:00
nifi
c89028a11f
reduced serial line buffer size
2009-11-18 15:34:57 +00:00
nifi
bb0ffe0478
moved rime initialization into rime router so it is easier to switch IPv6 routing module
2009-11-18 13:51:55 +00:00
nvt-se
7a9e9c72a1
switched to new radio return values
2009-11-13 12:38:14 +00:00
nvt-se
b909a62265
Reduced application buffer size for SD and switched parameter in cfs-coffee-arch.c
2009-11-11 14:59:33 +00:00
nvt-se
8c040be133
Changed the name of the declaration of the default block size. Reduced the OCR reading timeout.
2009-11-07 01:05:23 +00:00
nvt-se
7aac2d90fb
specify that energest.h is in the sys directory.
2009-11-06 17:18:47 +00:00
nvt-se
31850d2e29
wait for RX before reading, and ensure that the byte is read out by using a volatile dummy variable
2009-11-06 15:40:15 +00:00
nvt-se
731e1da844
increase the I/O rate and use etimer_restart to maintain a uniform wait time between iterations
2009-11-06 15:11:52 +00:00
nvt-se
f59e89cfb9
Fixed the problem of reads from the SPI where the first byte was sometimes lost.The SPI read function now only generates an idle symbol if there is not a byte
...
already in the reception buffer.
2009-11-06 14:02:59 +00:00
nvt-se
84f2a077de
the return value should be checked against the size of sd_buf instead of buf
2009-11-03 16:18:37 +00:00
nvt-se
9b4cd05e1f
Patch from David Gustafsson: break out SPI functions and fix bug in capacity
...
calculation.
Removed expensive modulo operations from sd_read and sd_write because the block size is now a variable. (nvt)
2009-11-03 15:21:43 +00:00
adamdunkels
d3131e1811
Print link-local IPv6 address when booting the node
2009-10-29 22:10:59 +00:00
adamdunkels
f03caa357e
Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login
2009-10-29 22:10:21 +00:00
nifi
831f16cf61
Fixed COOJA quickstart to run COOJA from current directory
2009-10-28 13:39:15 +00:00
fros4943
99a540fd0d
macro renamed to SPI_IS_ENABLED() to avoid confusions
2009-10-27 15:33:24 +00:00
fros4943
6b36cd9de9
added macro for checking whether SPI is ENABLED
2009-10-27 15:25:02 +00:00
nvt-se
4a0973a95f
specify the number of queuebufs that we want to use in the MSB430 platform by default
2009-10-26 16:11:24 +00:00
kasunch
ca6c8818b1
Two comment fixes
2009-10-22 15:48:20 +00:00
nifi
178548413e
added option to specify JTAG port for programming
2009-10-22 09:27:46 +00:00
