Commit graph

8520 commits

Author SHA1 Message Date
Adam Dunkels ef25cc6c58 Rimestats bugfix: only compile the rimestats printout if rimestats are enabled 2013-03-18 11:22:00 +01:00
Adam Dunkels 3efa84ecc8 New mechanism for computing the 6lowpan header length dynamically, depending on how large header the framer creates. Also check the incoming packet for buffer overflow. 2013-03-18 11:19:22 +01:00
Adam Dunkels cb2336a322 Send announcements only if the node is configured to be a router 2013-03-18 11:19:21 +01:00
Adam Dunkels 5993595a8f A number of updates to nullrdc
* add a few rimestats to keep track of sent and received acks
* made a number of configuration options possible to override (ack timing)
* added the logic for sending 802.15.4 link layer ack packets, despite not being able to guarentee the 802.15.4 MAC timing
* increased the number of sequence numbers to keep track of for duplicate filtering
2013-03-18 11:19:20 +01:00
Adam Dunkels 4541d3e85b Let the framer functions use ints instead of uint8_t to make them more generic 2013-03-18 11:19:18 +01:00
Adam Dunkels 277a348f60 Changed the name of the IPv6 number of route entries configuration from UIP_CONF_DS6_ROUTE_NBU to UIP_CONF_MAX_ROUTES. 2013-03-18 11:12:44 +01:00
Adam Dunkels 2d50a40643 A default configuraion file for Contiki
The contiki-default-conf.h file is intended as a safe fallback for
a number of configuration options in Contiki, to avoid putting too
much in the individual contiki-conf.h files.
2013-03-18 11:12:43 +01:00
Adam Dunkels 927cc8d895 Added #if UIP_CONF_IPV6 around the IPv6 code in the uIP source tree to allow the C files to be compiled even if IPv6 is not configured. 2013-03-18 09:45:30 +01:00
Adam Dunkels db1e8cdbac Separated the uIP makefile from the top-level Makefile.include into a separate core/net/Makefile.uip makefile 2013-03-18 09:45:29 +01:00
Adam Dunkels e9b1374383 Updated paths to relative paths to make it easier to move tests to new directories 2013-03-18 09:07:33 +01:00
Adam Dunkels 49bf7626f1 Split the collect test into collect and collect-lossy to make each individual
travis build complete faster.

Also changed the armgcc download link to a github location.
2013-03-18 09:07:33 +01:00
George Oikonomou f5a1ffa90d Merge pull request #170 from RongHQ/master
Fix a syntax error in cpu/cc253x/dev/uart0.c
2013-03-17 09:49:32 -07:00
Adam Dunkels e1cac43f65 Merge pull request #171 from errordeveloper/fix_cs_toolchain_install_script_on_travis
[ci] Travis needs 32-bit compatibility libraries
2013-03-16 10:36:20 -07:00
Ilya Dmitrichenko 9b6e748338 [ci] Travis needs 32-bit compatibility libraries 2013-03-16 15:28:26 +00:00
RongHQ 12b3d02ba1 Fix a syntax error in /cpu/cc253x/dev/uart0.c 2013-03-16 19:41:42 +08:00
Oliver Schmidt ee917b114c Merge pull request #169 from oliverschmidt/master
Restored build in cmd.exe environment.
2013-03-16 00:50:02 -07:00
Oliver Schmidt a2ac920887 Restored build in cmd.exe environmet by re-applying change f3cf57e41b which was reverted recently. 2013-03-16 08:48:36 +01:00
Oliver Schmidt 86dc97ca8c Merge pull request #168 from darconeous/pull-requests/core-net-resolv-misc
Miscellaneous small DNS resolver updates and fixes
2013-03-15 04:11:22 -07:00
Robert Quattlebaum da81360731 core/net/resolv: Misc. updates and cleanups. 2013-03-14 19:14:32 -07:00
Robert Quattlebaum 7e9f472faa core/net/resolv: Fix for resolving CNAME records. 2013-03-14 19:13:51 -07:00
Robert Quattlebaum 639a9ca399 core/net/resolv: Fix for SDCC. 2013-03-14 19:13:04 -07:00
Oliver Schmidt 94ac354b8d Merge pull request #167 from oliverschmidt/master
Added configurations of the new resolver.
2013-03-14 15:18:58 -07:00
Oliver Schmidt a0e2120fdb Added configurations of the new resolver. 2013-03-14 23:17:59 +01:00
Oliver Schmidt 59f625cbca Merge pull request #166 from oliverschmidt/master
Reduced code size.
2013-03-14 14:56:09 -07:00
Oliver Schmidt 46cb6013ae Reduced code size.
Combined recent changes from darconeous...
- Refactor to decrease minimum code footprint.
- Added `RESOLV_CONF_SUPPORTS_RECORD_EXPIRATION`.
...with a few additional changes to reduce code size.
2013-03-14 22:53:52 +01:00
Oliver Schmidt 61a8709bf6 Merge pull request #165 from oliverschmidt/master
Some more changes improving code style conformance and code size.
2013-03-13 09:53:40 -07:00
Oliver Schmidt d8862bd243 Some more changes improving code style conformance and code size. 2013-03-13 17:52:57 +01:00
Mariano Alvira 163cb7cf13 Merge pull request #154 from malvira/erbium-build-fixes-er3-7
Fix er 3 and 7 buids in latest erbuim (subscribers counter has changed type)
2013-03-13 08:47:24 -07:00
Oliver Schmidt b01db7557a Merge pull request #163 from oliverschmidt/master
Some coding style nomalization.
2013-03-13 08:15:46 -07:00
Oliver Schmidt 7a1fa4de6c Some coding style nomalization. 2013-03-13 16:14:29 +01:00
Oliver Schmidt 7eb540fc9b Merge pull request #162 from oliverschmidt/master
Added support for strncasecmp() which is now used in resolv.c.
2013-03-13 06:44:46 -07:00
Oliver Schmidt bbc26ef489 Added support for strncasecmp() which is now used in resolv.c. 2013-03-13 14:43:05 +01:00
Oliver Schmidt d2606295a1 Merge pull request #161 from oliverschmidt/master
Restored Contiki compatibility with non-C99 compilers.
2013-03-13 06:41:44 -07:00
Oliver Schmidt 8fa9767d47 Restored Contiki compatibility with non-C99 compilers.
(and compilers without non-standard extensions like void pointer arithmetic)
2013-03-13 14:40:24 +01:00
Oliver Schmidt 3a486d3954 Merge pull request #159 from oliverschmidt/master
Added support for <input type='hidden'>.
2013-03-13 02:53:46 -07:00
Oliver Schmidt 66fa843389 Added support for <input type='hidden'>.
Hidden form fields are aded to the page attribute buffer like text form fields so there's no need for special treatment in formsubmit(). However they are not added as widgets to the window so there's no user interaction.
2013-03-13 10:50:11 +01:00
Moritz 'Morty' Strübe b1dbc2047e Add mesh_ready() to mesh
mesh_ready checkes whether a packet is queued. This allows to avoid
packet loss at application level.
2013-03-13 09:44:38 +01:00
Nicolas Tsiftes 3277d81e90 Merge pull request #157 from g-oikonomou/issue-156
Fix cc2530 DMA priority define values
2013-03-12 08:44:10 -07:00
George Oikonomou cc37a1e46e Fix cc2530 DMA priority define values
Fixes #156
2013-03-12 15:39:59 +00:00
Mariano Alvira 4dd29cca64 er-13 has changed the type of notify_subscribers counter to int32_t
from uint16_t which breaks builds of WITH_COAP=3 or 7.

This patch changes the 03 and 07 engine to int32_t.

An alternate fix would be to switch out the type in erbuim.h based on
WITH_COAP.

Or, maybe better, would be to drop old COAP versions.
2013-03-11 16:49:52 -04:00
Robert Quattlebaum c0a693672c core/net: Added support for "bridge mode".
"Bridge mode" allows devices to more easily send 802.15.4 packets as if
they were a different device. It also turns off any packet filtering
that may be implemented at layer 2. It works by allowing
`PACKETBUF_ADDR_SENDER` to be set earlier in the stack.

This is useful for implementing 6LoWPAN-ethernet bridges.

Enabled via setting `NETSTACK_CONF_BRIDGE_MODE` to 1. Disabled by
default.
2013-03-10 14:45:15 -07:00
Adam Dunkels 4e40cb8a8d Merge pull request #116 from cetic/rpl-lifetimes
RPL Lifetimes
2013-03-10 13:04:07 -07:00
Adam Dunkels 39e5a8c6dc Merge pull request #80 from darconeous/mdns-resolv
Adds IPv6 and MDNS domain name resolution.
2013-03-10 12:58:39 -07:00
Adam Dunkels 262c9db1c4 Merge pull request #127 from mkovatsc/master
Erbium CoAP draft 13
2013-03-10 12:56:06 -07:00
Adam Dunkels 0841bce833 Merge pull request #82 from darconeous/master
Makefiles: Allow setting UIP_CONF_IPV6=0 to work as expected.
2013-03-10 12:51:03 -07:00
Adam Dunkels c7ef7198a8 Merge pull request #85 from darconeous/native-target-osx
Various updates to the minimal-net platform.
2013-03-10 12:48:07 -07:00
Robert Quattlebaum f145c17039 core/net/resolv: IPv6 and mDNS ("Bonjour") support. Major refactor.
This patch updates the DNS resolver to support IPv6 and introduces an
improved API for looking up DNS entries. This patch also adds optional
support for mDNS lookups and responses to the DNS resolver.

Here is a quick summary of the changes:

 * Added support for IPv6 lookups.
 * DNS queries now honor record expiration.
 * Added support for mDNS, compatible with "Bonjour".
 * Implemented a new lookup api, `resolv_lookup2()`, which provides
   more information about the state of the record(error, expired,
   looking-up, etc.).

About mDNS/Bonjour Support
--------------------------

This patch adds basic support for mDNS/Bonjour, which allows you to
refer to the name of a device instead of its IP address. This is
incredibly convenient for IPv6 addresses because they tend to be very
long and difficult to remember. It is especially important for
link-local IPv6 addresses, since not all programs support the '%'
notation for indicating a network interface (required on systems with
more than one network interface to disambiguate).

In other words, instead of typing in this:

 * `http://[fe80::58dc:d7ed:a644:628f%en1]/`

You can type this instead:

 * `http://contiki.local/`

Huge improvement, no?

The convenience extends beyond that: this mechanism can be used for
nodes to talk to each other based on their human-readable names instead
of their IPv6 addresses. So instead of a switch on
`aaaa::58dc:d7ed:a644:628f` triggering an actuator on
`aaaa::ed26:19c1:4bd2:f95b`, `light-switch.local` can trigger the
actuator on `living-room-lights.local`.

What you need to do to be able to look up `.local` names on your
workstation depends on a few factors:

 * Your machine needs to be able to send and receive multicast packets
   to and from the LoWPAN. You can do this easily with the Jackdaw
   firmware on an RZUSBStick. If you have a border router, you will need
   it to bridge the mDNS multicast packets across the border.

 * If you are using a Mac, you win. All Apple devices support mDNS
   lookups.

 * If you are using Windows, you can install Apple's Bonjour for Windows
   package. (This may be already installed on your machine if you have
   installed iTunes) After you install this you can easily do `.local`
   lookups.

 * If you are using a Unix machine, you can install Avahi.

The default hostname is set to `contiki.local.`. You can change the
hostname programmatically by calling `resolv_set_hostname()`. You can
change the default hostname by changing `CONTIKI_CONF_DEFAULT_HOSTNAME`.

You may disable mDNS support by setting `RESOLV_CONF_SUPPORTS_MDNS` to
`0`.

---------------------------------

core/net/resolv: `resolv_lookup2()` -> `resolv_lookup()`

Note that this patch should fix several `resolv_lookup()` bugs
that already existed. There were many cases where `resolv_lookup()`
was being called and the IP address ignored, but later code
assumed that the IP address had been fetched... ANYWAY, those
should be fixed now.

---------------------------------

examples/udp-ipv6: Updated client to use MDNS to lookup the server.

Also updated the Cooja regression test simulation.
2013-03-10 11:40:08 -07:00
Robert Quattlebaum 97e16760c3 core/net/uip-ds6: Make uip_ds6_maddr_add() and uip_ds6_maddr_lookup() const-correct. 2013-03-10 11:39:12 -07:00
Robert Quattlebaum 1d113f52ad core/net/uip: Rename uip_ethaddr to uip_lladdr.
There isn't really a good reason I can think of for these
to be different between IPv4 and IPv6.
2013-03-10 11:39:11 -07:00
Sébastien Dawans e02d480ff5 Moved RPL Lifetime configuration to rpl-conf.h 2013-03-09 16:28:43 +01:00