nvt-se
366d845336
DMA destination is now given as a parameter instead of being hardwired.
2007-11-06 15:08:55 +00:00
nvt-se
dc8b6e7dcd
Removed some unused headers and definitions.
2007-11-06 14:48:18 +00:00
nvt-se
882f340f17
Use a counter for the test so lost packets are spotted easily.
2007-11-06 14:44:42 +00:00
joxe
1d447dc043
added button sensing and leds-blinking for better sensor demo
2007-10-26 12:37:48 +00:00
adamdunkels
dd8469ee4a
Added inclusion of Tmote Sky bulk upload makefile
2007-10-25 13:28:15 +00:00
adamdunkels
d2f90802de
Compile profiling support only if PROFILE_CONF_ON is defined
2007-10-25 10:21:48 +00:00
adamdunkels
a9e4287cbe
Changed the energy estimation type ENERGEST_TYPE_RECEIVE to ENERGEST_TYPE_LISTEN to highlight that energy is spent on idle listening, not just the actual reception of packets
2007-10-25 09:30:39 +00:00
zhitao
ff006a5103
keep in synch with the Rime abstraction
2007-10-25 08:26:49 +00:00
nvt-se
e7dc3ec422
Initialize ctimer.
2007-10-24 13:47:50 +00:00
adamdunkels
910c9ea161
Added profiling support, made rime/mac initialization nicer
2007-10-23 21:29:40 +00:00
fros4943
7512df3f7b
removed bad memcpy:s
2007-10-23 12:16:13 +00:00
nifi
217056b8bd
sht11 architecture support for Sky
2007-10-23 08:53:50 +00:00
fros4943
28ddccef19
added missing function declarations
2007-10-22 13:08:13 +00:00
nvt-se
e57310c0b3
Removed duplicated statement.
2007-10-22 13:07:00 +00:00
nvt-se
06f923e502
Simple test for the SHT11 driver.
2007-10-22 13:05:30 +00:00
nvt-se
91b79de654
Use sht11 driver.
2007-10-22 12:21:20 +00:00
nvt-se
045225fa05
Made driver less platform-dependent and added support for msb-430.
2007-10-22 12:19:58 +00:00
nvt-se
0c9db3caa3
Moved to core/dev.
2007-10-22 12:19:31 +00:00
nvt-se
406cc6d5a8
Set channel to RF_CHANNEL after simple_cc2420_init.
...
Otherwise the init function would reset the channel to 11.
2007-10-12 12:47:32 +00:00
nvt-se
2d0225b0e4
Safeguard for invalid packets.
2007-10-04 10:02:08 +00:00
nvt-se
fb9b800c53
More clear power down procedure. Now it is required that cc1020_on
...
is called before anyone can send after the power down.
2007-10-02 14:05:45 +00:00
nvt-se
4e8bdb1c08
Power managment is handled by another layer.
2007-10-01 11:59:36 +00:00
nvt-se
c0686e80f1
Added definitions for the MAIN register.
2007-10-01 11:56:49 +00:00
matsutsuka
d6ec25e37c
The libconio_arch-small is architecture-depend implementation of console I/O with minimum size for the server mode.
2007-09-30 12:46:34 +00:00
matsutsuka
c2472ff0f1
contiki-main file for network client support.
2007-09-29 04:13:14 +00:00
matsutsuka
4381f4b964
Platform-depend CTK support is modified to minimize size of module.
2007-09-29 04:10:00 +00:00
matsutsuka
9e1e31f3bb
Makefiles have been modified to support customized crt0.
2007-09-29 04:07:00 +00:00
matsutsuka
c3d13b6dd4
Configuration file now supports:
...
- telnet window size
- UIP configuration
- new rs232 driver
2007-09-29 04:05:20 +00:00
fros4943
87e32f037e
enabled config of entire ar command, not only arguments
2007-09-28 07:21:21 +00:00
nvt-se
b72c228379
* Enable rtimers.
...
* Specify port direction first.
2007-09-21 14:53:36 +00:00
nvt-se
24ffa8cfaf
support third DMA line.
2007-09-21 13:51:09 +00:00
nifi
9d75d6d153
enabled inline functions
2007-09-19 14:09:31 +00:00
matsutsuka
c99b7dc827
status has been added for polling function.
2007-09-19 12:47:19 +00:00
matsutsuka
8d7bb2119c
Architecture-depend CTK implmeentation has been all rewritten by assembler for performance and memory reasons.
2007-09-19 12:46:15 +00:00
matsutsuka
b2a6d163fc
configuration for serial has been changed.
2007-09-19 12:44:45 +00:00
nvt-se
bbecdd9c34
removed uncommented line.
2007-09-14 19:27:22 +00:00
nvt-se
87018b2af5
use uint16_t to be specific about id type size.
2007-09-14 19:24:45 +00:00
nvt-se
5e7a435959
do not declare msp430_cpu_init here.
2007-09-14 19:24:07 +00:00
nvt-se
6955e028da
Use splhigh and splx.
2007-09-14 19:20:54 +00:00
nvt-se
290f41db06
better comments.
...
enable interrupt later.
2007-09-14 19:20:24 +00:00
nvt-se
ca733ddfce
Added some statistics.
2007-09-14 19:14:54 +00:00
nvt-se
928c22eda1
Minor refactoring and improved compliance with the radio interface.
2007-09-14 18:51:51 +00:00
matsutsuka
71e5298d90
Process "kill" is properly implemented.
2007-09-11 12:55:57 +00:00
matsutsuka
661476ad92
PC-6001mkII setting is added.
2007-09-11 12:55:35 +00:00
matsutsuka
809b23fe28
Configuration of regular ctk-conio.c has been added.
2007-09-11 12:55:16 +00:00
matsutsuka
6dd93a3d04
NEC PC-6001 support sources are initially added.
2007-09-11 12:12:59 +00:00
fros4943
db74bb6566
changed link argument sent to makefile:
...
instead of using linker, user may specify linker line including tools
2007-09-05 14:00:59 +00:00
oliverschmidt
89e81f9eed
Renamed 6502-conf.h into 6502def.h to be in line with similiar files created in the meanwhile and added C99 names.
2007-09-05 10:59:10 +00:00
ksb
6441821fc3
Forgot to add this file
2007-09-01 11:17:25 +00:00
ksb
73dfa52324
Changes IP address so it won't collide with the Tmote.
2007-09-01 10:09:11 +00:00
ksb
2bbf074f39
Added a gateway application the routes between SLIP on USB and the radio.
2007-09-01 10:06:05 +00:00
fros4943
974fcb66d4
convenience function for cooja.
...
converts printf()'s to log_message()'s
2007-08-23 08:14:30 +00:00
fros4943
6d86b77cfe
setting rime id at init
2007-08-23 07:35:26 +00:00
fros4943
d272b062f0
reimplemented receiver calls (earlier tcpip_input) from inside multithreaded environment
2007-08-21 13:09:40 +00:00
ksb
e55dbe433b
Build system improvements.
2007-08-21 09:06:23 +00:00
nvt-se
186a99857b
minor adjustments for ip.
2007-08-20 11:39:03 +00:00
nvt-se
81174c6389
cr->lf
2007-08-20 11:01:13 +00:00
nvt-se
aee4c71200
Use test-abc instead of core.
2007-08-17 13:10:16 +00:00
nvt-se
6dffb0ed63
unnecessary file.
2007-08-17 13:08:38 +00:00
nvt-se
96e06d1dde
Standardized integer types.
...
Removed unecessary volatility.
Make sure that the random back-off is only if the channel is busy.
2007-08-16 20:38:40 +00:00
nvt-se
defbe1d9ac
use new function.
2007-08-16 20:29:56 +00:00
nvt-se
9017949535
Improved interface and C standard compatibility.
2007-08-16 20:29:18 +00:00
nvt-se
6983417307
forgot return.
2007-08-16 17:10:49 +00:00
nvt-se
8b3e9477d9
call dma_init.
2007-08-16 13:54:58 +00:00
nvt-se
d5027f0041
Subscribe to DMA events on line 0 for the radio.
2007-08-16 13:52:17 +00:00
nvt-se
0723f1fbc7
Make it possible to subscribe to DMA events.
2007-08-16 13:51:57 +00:00
nifi
2780aef873
Include msp430def.h for standard defines
2007-08-16 13:35:33 +00:00
nvt-se
fefe56d913
Changes to standard types.
2007-08-16 13:24:57 +00:00
bg-
f398e56048
* Include avrdef.h for standard defines.
...
* Define AODV_COMPLIANCE.
2007-08-16 13:24:20 +00:00
nvt-se
5db2990884
Use the new type definitions file for msp430.
2007-08-16 13:23:41 +00:00
bg-
a20c9e6abb
* Include msp430def.h for standard defines.
...
* Remove obsolete LPM_CONF_OFF definition.
2007-08-16 13:10:53 +00:00
oliverschmidt
c42cbe3141
Added a naive clock implementation based on main loop counting for the Apple2 as it doesn't have a hardware clock.
2007-08-10 13:30:02 +00:00
nifi
296ad6cdb7
Updated to new radio_driver API
2007-08-07 11:20:11 +00:00
nifi
7e57cd240a
Updated to new radio_driver and mac_driver APIs
2007-08-07 11:17:54 +00:00
nifi
cc80dbf546
removed obsolete rime code for tr1001
2007-08-07 11:16:19 +00:00
nifi
d74d8d176d
Updated to new radio_driver API, removed obsolete rime code
2007-08-07 11:14:39 +00:00
nifi
fb54bba19e
Updated to new radio_driver API + LPM4_EXIT instead of LPM_AWAKE()
2007-08-07 11:11:19 +00:00
nifi
39c12bad29
Added stdint.h
2007-08-07 11:09:38 +00:00
nifi
6b2cd5c2d4
LPM4_EXIT instead of LPM_AWAKE()
2007-08-07 11:06:14 +00:00
nvt-se
199e6bd270
Use stdint.h
2007-08-06 12:20:46 +00:00
nvt-se
016778b29e
Removed redundant text.
2007-08-02 08:58:38 +00:00
nvt-se
6139885c51
Awake in order to let event processing occur immediately.
2007-08-02 08:57:58 +00:00
nvt-se
a6af72d129
Style changes.
2007-08-02 08:17:43 +00:00
nvt-se
0412975efd
Uncommented radio init line.
...
Added informative output.
2007-08-02 08:14:00 +00:00
nvt-se
a6dba97b84
Erase only main flash memory.
2007-08-02 08:13:20 +00:00
nvt-se
709adf51ad
Contributions from Michael Baar:
...
# msb430\dev\cc1020.c
Data type problem in the calibration function, therefore looping 10 seconds on boot. Fixed.
# msb430\contiki-msb430-main.c
Directly accessed power management while other modules used the Contiki layer resulting in the node sleeping most of the time. Fixed.
Added uIP support.
# msb430\buildscripts\makefile.win
Changed to erase only main-memory but keep infomemory so the node configuration is not erashed during flashing.
2007-07-31 07:54:44 +00:00
fros4943
1a021bbfc3
random ack time
2007-07-26 13:22:01 +00:00
fros4943
d80efeb8ed
defining uip cache size
2007-07-20 15:21:56 +00:00
fros4943
3768b44804
updated uip uaodv radio driver
2007-07-17 23:02:21 +00:00
fros4943
55443a148a
storing ack destination + removed header compression
2007-07-16 07:40:55 +00:00
fros4943
c50b7cc7ee
unicast packets being acknowledged
2007-07-11 15:23:42 +00:00
nvt-se
836eae63cb
Improvement batch.
2007-07-05 08:35:13 +00:00
nvt-se
eb7f7ba65b
Some more cleaning up.
2007-06-28 18:27:45 +00:00
nvt-se
268766e890
dma transfer support.
2007-06-28 14:41:17 +00:00
nvt-se
ff04b5e153
cleaned file.
2007-06-28 14:07:02 +00:00
nvt-se
b88e6642bd
Removed unnecessary things.
2007-06-28 13:47:28 +00:00
nvt-se
d7c489f0b2
jtag support.
2007-06-28 13:43:24 +00:00
nvt-se
ff3e2b8bd8
From the ESB port.
2007-06-28 12:54:05 +00:00
nvt-se
ae2e9f3677
Platform-specific devices.
2007-06-28 12:52:41 +00:00
nvt-se
792056e325
Test applications.
2007-06-28 12:51:31 +00:00
