Commit graph

2266 commits

Author SHA1 Message Date
Oliver Schmidt 757809196e Some finishing touch on the CBM retro targets. 2015-08-08 15:41:24 +02:00
Oliver Schmidt ca2552461e Adjusted retro target clock to "new" DNS resolver.
The DNS resolver requires 1/4 sec clock resolution. The retro targets had a 1/2 sec clock resolution (optimized for the 1/2 sec TCP timer) resulting in DNS resolver timeouts being 0. Therefore the retro target clock resolution is now increased to 1/4 sec.
2015-08-04 13:48:08 +02:00
Oliver Schmidt a30e2e0045 Allow to configure Telnetd idle timeout.
The default Telnetd idle timeout of 30 seconds seems somewhat short. Best to have it user-configurable (incl. the option to turn it off with an config value of 0).
2015-07-06 12:25:20 +02:00
Oliver Schmidt 5d039d9848 Optimized retro webbrowser configs.
The change c7b8bac006 optimized memory usage and thus allowed to adjust the retro webbrowser configs for improved web page compatibility.
2015-07-05 16:56:25 +02:00
Oliver Schmidt 2827b2d800 Rearrange Apple II language card usage.
The code of etimer.o has become to large to fit into $D000-$D400. So other object file have been chosen.
2015-06-28 22:12:44 +02:00
Oliver Schmidt a70fbf1bbf Reconfigured Telnet server.
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
2015-06-21 21:07:41 +02:00
Oliver Schmidt 55e568e7cb Minor Win32 config adjustment. 2015-06-21 14:15:41 +02:00
Oliver Schmidt 74db518846 Set Win32 file i/o to binary mode.
This is i.e. necessary to have the file based webserver-example successfully read 'contiki.gif'.
2015-06-14 17:48:36 +02:00
Oliver Schmidt c9edb9006b Merge pull request #1112 from oliverschmidt/master
Various improvements of the HTTP client and web browser.
2015-06-14 16:12:24 +02:00
Benoît Thébaudeau e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau 117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Benoît Thébaudeau aba0b8ab40 Merge pull request #1085 from alignan/pull/remote
New Zolertia Re-Mote platform (CC2538 + CC1120)
2015-05-30 00:11:57 +02:00
Antonio Lignan 330e450ba4 Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094).
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00
Benoît Thébaudeau 8c952e8026 Merge pull request #1082 from g-oikonomou/cc2538/readme-cdc
Update the CC2538DK README about a Win CDC driver
2015-05-26 00:29:50 +02:00
George Oikonomou b86c26fff8 Update the CC2538DK README about a Win CDC driver
* The current version of the README points to a wrong URL
  for the LUFA Virtual Serial driver.
* A driver is nowadays provided by TI with CC2538
  Foundation Firmware

Thus, this pull updates the LUFA driver URL and also provides a
link to CC2538 Foundation Firmware
2015-05-25 22:06:25 +01:00
Matthieu Baerts 78b6b50194 Z1: tmp102: simple: fixed wrong cast
When using this code:

    (int8_t)tmp102_read_temp_x100() / 100

Only the first value is casted into a int8_t type.

tmp102_read_temp_x100() returns the temperature in Celcius * 100. Most of
the time this value will be lower than -2^7 and higher than 2^7 (+/- 1.27°C).

The cast is not needed but a comment about this implicit cast has been added.
2015-05-22 18:15:26 +02:00
Antonio Lignan 2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Adam Dunkels 730bda2001 Merge pull request #883 from cmorty/pull/global-macros
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Ulf Knoblich a388a1bcd7 CC2538: added support for SSI1 2015-05-18 10:02:55 +02:00
Moritz 'Morty' Strübe 0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou 541688235c Update the CC26xx README in terms of CC26xxware 2015-05-17 15:01:02 +01:00
George Oikonomou b4067560ba Remove references to obsolete peripheral clock scaling functions 2015-05-17 15:01:01 +01:00
George Oikonomou 8b1f2ef33c Reset I2C with HAPI call instead of register access 2015-05-17 15:01:00 +01:00
George Oikonomou 7a5b670f76 Remove references to IOC_JTAG_DISABLE 2015-05-17 14:09:52 +01:00
George Oikonomou 32840db66b Update driverlib version macros 2015-05-17 14:09:51 +01:00
Benoît Thébaudeau e88b3908ad cc2538dk: README: Add URL of Sourcery G++ Lite 2008q3-66
Document the URL of the older Sourcery G++ Lite 2008q3-66 arm-none-eabi
toolchain mentioned by README.md so that users can easily find it if
needed.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-05-17 01:53:09 +02:00
Antonio Lignan 32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
Antonio Lignan 402eabecca Merge pull request #929 from lab11/delete-old-coap
Delete old CoAP implementation
2015-05-15 15:49:04 +02:00
George Oikonomou 7ae3cd49ba Make sure SSI0 is powered and clocked before accessing it
* Fail all SSI0 operations if the module is not powered and clocked
* Make sure SERIAL is powered before trying to enable run mode clock
2015-05-15 11:38:20 +01:00
George Oikonomou 019143226b Adjust main:
* Re-order OSC, VIMS cache, I/O latch configuration instructions
* Don't automatically enable UART RX: Let the example decide this
2015-05-15 09:21:04 +01:00
George Oikonomou 6e7d52b5df Improve MPU power-cycling logic:
* Keep MPU_PWR low when the sensor is not in use
* Deselect the sensor when not in use, in order to restore the I2C ping state
* Explicitly control the MPU_INT pin
* Don't shutdown the sensor when it's shut down
* Remove explicit shutdown-related API extension. It is no longer required
2015-05-15 09:21:04 +01:00
George Oikonomou dcf0d11050 Re-map tag UART-related IOID defines 2015-05-15 09:21:03 +01:00
George Oikonomou 2cc59c524a Configure pins for unused tag peripherals 2015-05-15 09:21:03 +01:00
George Oikonomou e893c914b6 Set SPI pins to a low leakage state 2015-05-15 09:21:03 +01:00
George Oikonomou 421fbfae25 Change the LPM locks API:
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.

This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou 0e92b508b3 Don't clock GPT0 on device startup 2015-05-15 09:21:02 +01:00
George Oikonomou 6611acadc7 Don't fire-up SERIAL automatically 2015-05-15 09:21:02 +01:00
George Oikonomou 34be012661 Improve I2C power-cycling logic:
We only power, clock and enable the peripepheral when / if we need it

* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
2015-05-15 09:21:02 +01:00
George Oikonomou 0ad4b5f323 Add the ability to put the I2C in a known/default state 2015-05-15 09:21:01 +01:00
George Oikonomou d1a1c16bd0 Define pins for more sensortag peripherals 2015-05-15 09:21:01 +01:00
George Oikonomou 4378217462 Improve sensortag external flash power management:
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag

Obsoletes and Closes #988
2015-05-15 09:21:01 +01:00
George Oikonomou cf99160706 Change lpm_shutdown() API call:
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou 5644e95fb6 Fix global interrupt manipulation 2015-05-15 09:21:00 +01:00
George Oikonomou 3f310e462f Tidy-up clock configuration 2015-05-15 09:20:59 +01:00
George Oikonomou 450550a7d1 Explicitly configure Srf pins for unused peripherals 2015-05-15 09:20:59 +01:00
George Oikonomou 7a189d010b Don't power on SERIAL in the Srf's board_init 2015-05-15 09:20:59 +01:00
George Oikonomou 00a6c31158 Improve OPT sensor driver and usage
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou 3ab1b836c4 Configure button pins with hysterisis 2015-05-15 09:20:58 +01:00
George Oikonomou 7641aa89f2 Tidy-up macro semicol usage 2015-05-15 09:20:58 +01:00
George Oikonomou 0b6813513c Undefine CTS/RTS pins for the SmartRF 2015-05-15 09:20:58 +01:00