deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
9375 commits 6 branches 13 tags 80 MiB
Commit graph

2071 commits

Author SHA1 Message Date
Nicolas Tsiftes
350c83c947 Merge pull request #656 from atiselsts/native_platform_patches 
Minor improvements for the native platform
 2014-06-07 23:06:36 +02:00
George Oikonomou
ba9c2d40eb Merge pull request #682 from g-oikonomou/watchdog-cc2538 
Confine CC2538 WDT on/off conf inside the driver
 2014-06-03 22:05:08 +01:00
George Oikonomou
25cd0788a6 Merge pull request #683 from g-oikonomou/sensinode-modules 
Fix MODULES for the Sensinode platform
 2014-06-03 22:03:42 +01:00
Adam Dunkels
64f65b4e45 Merge pull request #617 from nfi/extended-radio-api 
Extended radio API with support for setting channel, pan id, addressing modes, etc
 2014-06-03 21:32:53 +02:00
Nicolas Tsiftes
3650950460 Merge pull request #678 from simonduq/sky-disable-ndp 
Disable IPv6 Neighbor Discovery Protocol by default on the sky platform
 2014-06-02 10:52:07 +02:00
Rémy Léone
25c8b0835d Closing doxygen groups 2014-05-30 11:01:20 +02:00
George Oikonomou
6e08841e5c Fix MODULES for the Sensinode platform 2014-05-18 15:30:54 +02:00
George Oikonomou
807ee624e4 Confine CC2538 WDT on/off conf inside the driver 
Instead of requiring all calls to `watchdog_start` to be
wrapped inside `#if WATCHDOG_CONF_ENABLE` guards, we control
things from within the WDT driver itself.

This commit also includes some minor documentation and
indentation cleanups
 2014-05-18 14:12:16 +02:00
George Oikonomou
b864ec2b71 Merge pull request #661 from hexluthor/watchdog-enable 
CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer
 2014-05-18 14:11:49 +02:00
George Oikonomou
eabc244bff Merge pull request #641 from hexluthor/backdoor-conf 
CC2538: Add CONF parameters to select boot loader backdoor pin and logic level
 2014-05-18 13:29:02 +02:00
George Oikonomou
026864d129 Merge pull request #665 from hexluthor/cc2538-flash-conf 
CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters.
 2014-05-18 13:12:49 +02:00
Simon Duquennoy
6e53ab6eb0 Disable IPv6 Neighbor Discovery Protocol by default on the sky platform 2014-05-14 17:29:18 +02:00
Claes Jakobsson
9c08f28956 Added EEPROM support for Cooja with a rudimentary hexdump -C like viewer in the mote interface view 2014-05-08 22:35:58 +02:00
Ian Martin
2abaeaa8cc CC2538: Add FLASH_CONF_ORIGIN and FLASH_CONF_SIZE config parameters. 2014-05-02 11:35:58 -04:00
Ian Martin
7081440eff CC2538: Add WATCHDOG_CONF_ENABLE to optionally disable the watchdog timer. 2014-05-02 10:28:30 -04:00
George Oikonomou
08c884afa0 Improve the CC2538 extended RF API implementation 
* Decouple 64-bit address from LINKADDR_SIZE
* get and set object from/to the start/end of the src/dest buffer
* We expect size == 8 (rather than size < 8) for both get_ and set_object. Error otherwise
* The RF no longer sets parameters by itself. We let the platform do this, using the extended API.
 2014-04-23 12:20:16 +01:00
George Oikonomou
3183805ba4 Implement extended RF API for the CC2530 RF 2014-04-23 12:16:50 +01:00
Atis Elsts
9cbfede2b6 Explicitly initialize queue buffer in the main startup routine only if uIP is used. 
The Rime stack already does this on its own, and there is no need to do it twice.
 2014-04-22 14:40:04 +02:00
Atis Elsts
b9e15a5986 Make native platform's main loop less noisy. 2014-04-22 14:38:08 +02:00
Atis Elsts
6ea744421b Initialize the rtimer component on native platform's startup. 
Otherwise applications that use rtimers die when run as native code because of an unhandled signal.
 2014-04-22 14:35:01 +02:00
Ian Martin
ee05810904 Changes suggested by @bthebaudeau. 2014-04-18 10:29:47 -04:00
George Oikonomou
49bf7cc241 Merge pull request #616 from hexluthor/listing 
CC2538: Add a Makefile rule to generate a final assembly listing.
 2014-04-17 22:13:52 +01:00
Benoît Thébaudeau
d93d129da6 cc2538: uart: Make it possible to use several UARTs simultaneously 
This avoids the limitation of having a single UART available at runtime, without
duplicating code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
 2014-04-17 18:53:44 +02:00
Ian Martin
2cf730a1c6 Un-indent preprocessor directives. 2014-04-17 10:39:00 -04:00
Ian Martin
23a3a7f004 Add a note about "make cc2538-demo.lst" to the platform README. 2014-04-16 10:47:01 -04:00
Ian Martin
16936d864c Rename FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PIN to FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN. 2014-04-16 10:19:37 -04:00
Ian Martin
1a63c47cf9 CC2538: Add CONF parameters to select boot loader backdoor pin and logic level. 2014-04-15 17:36:55 -04:00
Brad Campbell
af27d2d252 [CC2538-SPI] Implement SPI_FLUSH, spi mode, !CS 
Because the CC2538 has a multi-byte SPI RX FIFO, flushing the buffer
requires more than just a single read. This adds a loop that empties the
entire RX buffer on a FLUSH().

Different SPI chips needs different SPI settings. This commit adds a
function that allows chip drivers to configure the SPI peripheral before
using it.

The frame pin the driver was using as a chip select does not work as
most devices expect it to. It toggles after every byte, and most chips
interpret that as end of message. To make drivers more reliable, each
chip driver should setup a GPIO and assert it as needed.
 2014-04-15 14:07:10 -04:00
George Oikonomou
33abe26ec8 Merge pull request #411 from ADVANSEE/cc2538-adc 
cc2538: Add adc driver and example
 2014-04-13 03:05:12 +01:00
George Oikonomou
22554e6d72 Merge pull request #596 from hexluthor/cc2538-uart-baudrate 
cc2538: Support any UART baudrate.
 2014-04-13 02:51:58 +01:00
Niclas Finne
fc6814a104 Added stub for extended radio API for seedeye 2014-04-03 13:38:31 +02:00
Niclas Finne
b8a23564a3 Added stub for extended radio API for Cooja 2014-04-03 13:38:29 +02:00
Ian Martin
336224633a Eliminate UART_CONF_IBRD and UART_CONF_FBRD. 2014-03-22 10:26:03 -04:00
François Revol
726bdd699a native: Add CTK to the module list 
It is needed for apps compiled WITH_GUI.
 2014-03-21 23:01:02 +01:00
Nicolas Tsiftes
b78eb96a54 Merge pull request #590 from g-oikonomou/native-rpl-module 
Include the RPL module for the native platform
 2014-03-18 12:32:56 +01:00
Oliver Schmidt
d1d6278f42 Added info on W5100 driver. 2014-03-15 16:56:08 +01:00
George Oikonomou
4704eeb919 Include the RPL module for the native platform 2014-03-09 03:29:43 +00:00
George Oikonomou
6dc9dfa6c2 Merge pull request #551 from JelmerT/feature-cc2538-bsl 
CC2538 serial boot loader python script
 2014-03-09 02:11:36 +00:00
Jelmer Tiete
34e48f4233 Added bootloader backdoor configuration for cc2538DK in contiki-conf.h and selector in startup-gcc.c. Updated Makefile.cc2538dk to support direct uploading. Also updated the platform readme to include the workflow with cc2538-bsl. 2014-03-07 15:44:08 +01:00
Brad Campbell
d14f0d5eed CC2538: add secondary location to ieee address 
The CC2538 currently has two addressing options: a hardcoded address set
at compile time or the address stored in primary address section of the
info page. This commit adds the option to choose the secondary location
of the ieee address from the info page, or any memory address.

To use, define `IEEE_ADDR_CONF_USE_SECONDARY_LOCATION` in `project-conf.h`
or similar.

For example:

    #define IEEE_ADDR_CONF_USE_SECONDARY_LOCATION 1
 2014-03-06 10:31:30 -05:00
Oliver Schmidt
a1cd642e6e Merge pull request #554 from oliverschmidt/master 
Fixed win32 broken by recent changes.
 2014-02-02 12:10:57 -08:00
Oliver Schmidt
71c671b6cf Fixed win32 broken by recent changes. 2014-02-02 20:19:47 +01:00
George Oikonomou
a63376f8be Use -Os for CC2538 builds 
As discussed in #503, -Os was broken with one of the toolchains
recommended in the platform's README and for that reason we were
using -O2 by default.

This commit sets the default to -Os and updates the README to no
longer recommend the toolchain in question
 2014-01-31 20:02:43 +00:00
Adam Dunkels
45265249fc Changed the name of the rimeaddr module to linkaddr 2014-01-29 20:12:24 +01:00
Adam Dunkels
765e9acded Merge pull request #499 from adamdunkels/bold/modularize-everything 
A bold move: modularize everything
 2014-01-29 08:17:10 -08:00
Ian Martin
f3cc607101 eval-adf7xxxmb4z: Use the nullrdc driver instead of sicslowmac. 2014-01-26 17:40:31 -05:00
Adam Dunkels
4f498e2eac Updated the include paths to point to the new places 2014-01-26 23:20:47 +01:00
Adam Dunkels
2ec176891f Added the necessary modules to make the eval-adf7xxxmb4z port compile 2014-01-26 23:20:47 +01:00
Adam Dunkels
824d2047da Add the explicit list of modules, since we cannot do auto-dependency management of them 2014-01-26 23:20:47 +01:00
Adam Dunkels
fce84c178c Removed unused rime-udp code 2014-01-26 23:20:45 +01:00