oliverschmidt
614fa668cd
Removed SELFSTART_PROCESS as AUTOSTART_ENABLE generally serves that purpose - and AUTOSTART_ENABLE gets already set as required :-)
2008-02-08 22:48:28 +00:00
oliverschmidt
0655839603
Removed superfluous semicolon.
2008-02-08 12:14:52 +00:00
oliverschmidt
fe6a55d1a4
Accomodate for the now more complex shell output.
2008-02-07 23:06:03 +00:00
oliverschmidt
806f79bb03
Replaced (now obsolete) PROCESS_LOADABLE with SELFSTART_PROCESS.
2008-02-07 16:34:18 +00:00
oliverschmidt
155a27ff59
Switched from (now obsolete) 'process_load' to 'autostart_processes'.
2008-02-07 15:53:43 +00:00
oliverschmidt
a105e1a40c
Added 'const'.
2008-02-06 16:41:19 +00:00
adamdunkels
cb6bc45350
Added code for routing IP packets over low-power radios using the Rime mesh module
2008-02-03 21:03:19 +00:00
adamdunkels
dc43a9713d
Added uIP destimation unreachable message, removed defailt XMAC timer definitions (for now), turned profiling off(for now), added process event number configuration, reduced data memory size for the ELF loader
2008-02-03 21:01:36 +00:00
adamdunkels
f5b08ff115
Added a crude hack for drawing lines between nodes
2008-02-03 20:49:50 +00:00
adamdunkels
28a3a51f82
Added uIP ICMP destimation unreachable message generation
2008-01-24 23:09:40 +00:00
adamdunkels
68523814c5
Moved from examples/sky into generic platform/sky/apps so that all examples can use it
2008-01-23 20:34:37 +00:00
adamdunkels
c2ef303c24
Updated for the new simple_cc2420 API
2008-01-23 14:58:01 +00:00
nvt-se
6005437b27
Disable the watchdog during the whole erase operation.
2008-01-21 10:40:26 +00:00
nvt-se
bed0963769
Call watchdog_periodic before erasing each sector, because this operation
...
takes approximately 1s.
2008-01-21 10:28:44 +00:00
adamdunkels
685de41feb
Fixed buggy build
2008-01-19 06:57:44 +00:00
nifi
3e0e3d4965
added energest-arch.c
2008-01-18 18:26:02 +00:00
adamdunkels
34bd11905c
Rewrote the timesynch code to use the Rime sniffer interface instead of the kludge of running timesynch as a MAC layer
2008-01-14 14:50:01 +00:00
adamdunkels
02ee418313
Moving timesynch.[ch] from sys/ to core/net/rime as they have more to do with Rime than with the kernel
2008-01-14 14:22:16 +00:00
adamdunkels
7a356d0fb5
Added support for (simulated) serial data input. Data written to netsim's standard input are now sent as serial data to the main node.
2008-01-14 09:38:16 +00:00
fros4943
4c131d6975
added max printf2log message size
2008-01-11 15:37:38 +00:00
adamdunkels
0cb1efe718
Added cfs-posix
2008-01-08 14:27:28 +00:00
adamdunkels
f935be10c9
Added initalization of the serial library. Changed LPM3 to LPM2 since the current serial driver does not work with LPM3 yet (we need to add start edge detection interrupt support to fix that).
2008-01-08 08:21:03 +00:00
adamdunkels
690805ebe7
Added configuration for upcoming shell improvements, removed PROCESS_CONF_FASTPOLL
2008-01-08 08:19:56 +00:00
adamdunkels
959c4f3ee2
Removed ENERGEST_CONF_ON which is present in contiki-conf.h anyway
2008-01-08 08:18:00 +00:00
adamdunkels
bd9230b4b3
Added serial input from stdin, removed uIP initialization since uIP is not used anyway, made stdout unbuffered
2008-01-08 08:08:57 +00:00
adamdunkels
b7ab95499f
Added serial and cfs-posix-dir
2008-01-08 08:08:05 +00:00
oliverschmidt
26a554e7c2
Added C128 port. It runs the example webserver both in the cgi and cfs variant - although the latter only with a reduced MTU size due to memory constraints.
2008-01-05 22:30:23 +00:00
oliverschmidt
a9a1a00f27
Moved GTK port to the backyard as it doesn't work for quite some time by now.
2008-01-05 21:06:38 +00:00
oliverschmidt
00d75c8d16
Made use of uip_ipaddr_to_quad().
2008-01-04 23:28:33 +00:00
oliverschmidt
74fc3b4576
Made netsim gateway ip addr on Windows/Cygwin configurable at the command line.
2008-01-04 23:23:29 +00:00
oliverschmidt
5bff4631e4
Minor reformatting.
2008-01-04 23:09:03 +00:00
oliverschmidt
f75d01a428
Log ip addr in the ordinary way.
2008-01-04 22:21:04 +00:00
oliverschmidt
b96c9deebc
Added "usual" comments.
2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21
Introduced yet another high-level config macro.
2008-01-01 19:47:03 +00:00
oliverschmidt
852d2c0283
Introduced very lightweight pfs implementation based on Apple ProDOS.
...
ProDOS requires for each opened file a user-supplied page-aligned 1024 byte i/o buffer. This makes the generic POSIX file i/o library contained in the cc65 C-library quite heavyweight.
In contrast the lightweight pfs implementation uses the uIP packet buffer as ProDOS i/o buffer. Therefore:
- Only one file may be open at any time.
- That file may not be open while the uIP packet buffer is used by uIP. The open()/read()/close() sequence should be completed before Contiki event scheduling or inside handling a single Contiki event.
- The uIP packet buffer must be large enough to hold the ProDOS I/O buffer. Depending on the position of the uIP buffer in memory this means between 1024 and 1024 + 256 bytes. Therefore in an Ethernet environment setting the MTU_SIZE to at least 1266 is safe (So the default of 1500 is just fine).
2008-01-01 18:49:50 +00:00
oliverschmidt
69faf1ff4d
Set sprite color.
2007-12-24 15:01:49 +00:00
oliverschmidt
5592b1df6c
Implement cfs API on preprocessor level using POSIX functions..
2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9
Introduced some more high-level config macros.
2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200
Made use of the new high-level config macros.
2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d
Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios.
2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd
Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all.
2007-12-21 01:36:01 +00:00
oliverschmidt
fe023c6d3e
Introduced very lightweight log implementation not depending on any file I/O library.
2007-12-21 00:43:57 +00:00
oliverschmidt
c36697fca9
Added target-specifc mouse configuration values.
2007-12-20 22:59:41 +00:00
oliverschmidt
e63610e1c9
Added target-specifc mouse support (sprite handling).
2007-12-20 22:54:22 +00:00
oliverschmidt
ff6622310f
Added target-specifc mouse configuration values.
2007-12-20 22:52:18 +00:00
oliverschmidt
eab988e84d
Added target-specifc ctk (and www) configuration values.
2007-12-20 20:54:15 +00:00
nvt-se
f0891be218
added clear channel assessment timeout. long to begin with.
2007-12-20 14:44:31 +00:00
fros4943
d8f6f03edc
moving radio init to init-net files
2007-12-20 13:43:24 +00:00
fros4943
d0997c2dab
major bugfix: padding synch with zero
2007-12-20 13:36:59 +00:00
nvt-se
abb2731ed7
corrected comparison when bits don't need shifting.
2007-12-20 10:48:01 +00:00
nvt-se
7a6a9e62e4
improved logic.
2007-12-19 13:25:41 +00:00
nvt-se
1f00c20815
state variable must be volatile.
2007-12-19 13:09:01 +00:00
oliverschmidt
70fe24817e
Added target-specifc ctk (and www) configuration values.
2007-12-18 17:51:20 +00:00
nvt-se
b4a8641dda
removed printf's.
2007-12-18 15:27:43 +00:00
nvt-se
f9d24f0d24
Wake up from sleep in the interrupt when the receiver process is going
...
to be polled.
2007-12-18 15:26:25 +00:00
fros4943
d21572da02
configurable port
2007-12-18 11:55:01 +00:00
nvt-se
ab115e4b10
Removed deprecated function.
2007-12-17 20:18:29 +00:00
nvt-se
1566f55e04
use smaller payload buffer size and provision for synchronization word in
...
the total buffer.
2007-12-17 20:15:53 +00:00
nvt-se
bcefffb0e7
set ev to valid value.
2007-12-17 18:48:50 +00:00
nvt-se
692da8fd47
swapped the currents for lpm and cpu.
2007-12-17 18:47:17 +00:00
nvt-se
004143b6b8
set rxlen to zero before enabling interrupts.
2007-12-17 16:37:15 +00:00
nvt-se
2288cdecbb
small cleanup.
2007-12-17 16:23:32 +00:00
nvt-se
2d5f331b34
new line.
2007-12-17 16:20:34 +00:00
fros4943
479d74ce6a
added receiver process outside interrupt
2007-12-17 15:53:57 +00:00
fros4943
7886d51045
removed old dma_init
2007-12-17 15:47:55 +00:00
fros4943
3936e0c275
updated version
2007-12-17 15:47:40 +00:00
nvt-se
5f1ca4ccdf
use synchronous transmission.
2007-12-17 15:26:47 +00:00
nvt-se
2a0351afb4
improved uip support and cleaned up the source.
2007-12-17 13:33:09 +00:00
nvt-se
86ce511469
Separate files for network initialization.
2007-12-17 13:20:54 +00:00
nifi
babb455dae
More explicit assignment of Rime address from node ID
2007-12-17 13:04:10 +00:00
adamdunkels
381f5dc4cc
Initialize Rime address from hardware MAC address if no node ID has been configured. Be more explicit on how Rime address is assigned from node ID. Set time synch authority level from Rime address rather than node ID. Fix bug that put CPU in LPM2 instead of LPM3.
2007-12-17 12:35:23 +00:00
nifi
f4ddc371e8
changed the way that rime address is set
2007-12-17 12:17:23 +00:00
fros4943
4da695ce72
bugfix: adding cc1020_init again, node hangs at cc1020_on (calib) otherwise
2007-12-17 11:23:57 +00:00
nvt-se
6a42706847
removed duplicate.
2007-12-17 11:15:21 +00:00
nvt-se
a305e3ccbb
removed lpm_on.
2007-12-17 11:14:28 +00:00
fros4943
3969ea6f9d
not using usb port to program the msb
2007-12-17 11:10:45 +00:00
oliverschmidt
e991edc24d
Added route handling to the Cygwin build. It is done similiar to the other builds by simply shelling out to 'route'. However the coding isn't placed in the driver but in the netsim node main method - and it is fully parametrized.
...
Cygwin doesn't seem to call exit functions on SIGTERM so I needed to go for a signal handler in order to delete the route.
2007-12-17 01:12:09 +00:00
adamdunkels
2b4f33a4dd
Enabled support for CC2420 timestamps
2007-12-16 15:05:04 +00:00
adamdunkels
d13648292e
Added initialization of the time synchronization module
2007-12-16 15:03:35 +00:00
oliverschmidt
8644822a34
Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:08:09 +00:00
oliverschmidt
c7a24bf6cf
Soe we're finally bak at reducing the memory footprint be avoiding to pull in large C-library enitities.
2007-12-16 13:07:35 +00:00
oliverschmidt
805f3f87d3
Make the "empty" error_exit implementation the default to be optionally overridden.
2007-12-16 13:05:23 +00:00
oliverschmidt
7b3d0559b3
Minimal reformatting.
2007-12-15 23:02:16 +00:00
oliverschmidt
21e343dc2f
Don't depend on program handler for project builds.
2007-12-15 21:54:54 +00:00
oliverschmidt
0e8649e5ae
Don't override www defaults for project builds.
2007-12-15 21:39:06 +00:00
oliverschmidt
97b1c95005
Activate mouse support for fullscreen mode.
2007-12-15 21:30:56 +00:00
oliverschmidt
9765b76455
Fixed typos.
2007-12-15 20:12:28 +00:00
oliverschmidt
6fd3b0dbae
Removed CTK_CONF_HYPERLINK from shared code as its use is still unclear (and the implementation was incomplete anyway).
2007-12-15 11:34:59 +00:00
oliverschmidt
b32f0643ab
Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well).
2007-12-15 11:04:11 +00:00
oliverschmidt
b89a08be8b
Allow Cygwin based Win32 platform to be used for 'project builds' (in the sense of the Contiki 2.x build system) beside the exsisting 'platform build'.
2007-12-15 00:00:34 +00:00
oliverschmidt
3a3a98fc0f
Made pc-6001 behave as before.
2007-12-14 23:49:14 +00:00
oliverschmidt
4519240466
Made ethernut2 behave as before.
2007-12-14 23:45:56 +00:00
oliverschmidt
7ad283bfe1
Made ethernut1 behave as before.
2007-12-14 23:44:49 +00:00
oliverschmidt
e4e608bd1d
Made gtk behave as before.
2007-12-14 23:40:41 +00:00
fros4943
c028df7ecf
not using mempcy for ack crc
2007-12-13 16:57:31 +00:00
fros4943
afb1cb28d3
initializing rimeaddr from nodeid similar to sky platform (!= esb platform)
2007-12-13 16:11:22 +00:00
nvt-se
54bef4bea3
added back initializations that were missing in the previous commit.
2007-12-13 13:10:02 +00:00
nvt-se
665c58fd2a
Contributions from Michael Baar:
...
CC1020
o Turns off only after transmission has ended and not in between
o Using events for DMA takes too long. It should use a callback when
DMA finishes to turn off the transmit mode as early as possible.
Core/UART
o Added profiling and energest initialization
o Changed low-power mode from LPM1 to LPM3
2007-12-13 12:51:38 +00:00
nvt-se
b1d87bf0d3
Removed deprecated rules.
2007-12-13 11:29:12 +00:00
fros4943
0fc2178857
added queuebuf conf
2007-12-13 08:00:51 +00:00
