Adam Dunkels
b78ab6753c
Added makefiles to make core/net/mac into a separate module
2014-01-26 23:20:26 +01:00
Adam Dunkels
d777ae14e4
Moved cxmac into a separate module
2014-01-26 23:20:26 +01:00
Adam Dunkels
083fe0b594
Moved the contikimac code into a core/net/mac/contikimac module
2014-01-26 23:20:25 +01:00
Adam Dunkels
41050794a4
Include the core/net and core/net/ip modules in the core/net/ipv6 module
2014-01-26 23:20:25 +01:00
Adam Dunkels
c80615913f
Include the core/net and core/net/ip modules in the core/net/ipv4 module
2014-01-26 23:20:25 +01:00
Adam Dunkels
d10a0f8830
Made the rime code into a separate module
2014-01-26 23:20:24 +01:00
Adam Dunkels
cb02e67b29
Replaced the old Makefile.uip with module makefiles
2014-01-26 23:20:24 +01:00
Adam Dunkels
5f3fe7f7c7
Updated include paths for the moved files under net/
2014-01-26 23:20:23 +01:00
Adam Dunkels
afdeed1c64
Moved IPv6 files into the net/ipv6 module
2014-01-26 23:20:22 +01:00
Adam Dunkels
06c83ffb91
Moved IPv4 files into the net/ipv4 module
2014-01-26 23:20:21 +01:00
Adam Dunkels
65eba46be2
Moved all generic IP files into the net/ip module
2014-01-26 23:20:21 +01:00
Adam Dunkels
17d48c6d7a
Merge pull request #504 from adamdunkels/push/ping-reply-api
...
A ping reply API
2014-01-26 14:03:21 -08:00
Martin Heusse
662eb4db14
Fix compilation error when DEBUG enabled in core/net/mac/framer-nullmac.c
2014-01-24 20:23:26 +01:00
Csaba Kiraly
d1822b5880
collect: making some protocol parameters configurable by COLLECT_CONF_ style defines
...
TTL (which has a rather low default of 15), MAC level retransmissions,
overall number of retransmissions, and the header bits dedicated to these
were all fixed in the collect.h and collect.c, without a simple way to
override them.
Extracted these as COLLECT_CONF_ parameters, keeping defaults as they were
before.
Signed-off-by: Csaba Kiraly <kiraly@disi.unitn.it>
2014-01-24 12:53:16 +01:00
Adam Dunkels
c8c7c4ae3a
Add comments to the #else and #endifs to make it clearer to what #ifdef they belong.
2014-01-21 20:58:31 +01:00
Adam Dunkels
9e8733e57a
Correct the operator in the comment so that it matches the actual #if
2013-12-18 08:35:06 +01:00
Adam Dunkels
9114cd3215
Added an API for getting a callback when a ping reply is received.
2013-12-13 08:36:51 +01:00
Adam Dunkels
a6a081e67d
Fixed a severe error in the bugfix: the conditional was reversed. The check must be if the TCP MSS is larger than the BUFSIZE and not the other way around.
2013-12-12 22:43:28 +01:00
Adam Dunkels
ef83850e63
Removed redundant #ifdef
2013-12-12 22:20:20 +01:00
Adam Dunkels
c0b3c87ba7
Make 0 the default link-layer header length, as far as uIP is concerned. Most currently used linke layers (specifically, 802.15.4) has adaptation layers that use separate buffers, so there is no need to reserve space in the uIP buffer.
2013-12-12 22:20:09 +01:00
Adam Dunkels
c7e0fa7152
Moved #defines so that UIP_TCPIP_HLEN and UIP_LLH_LEN are defined before they are used
2013-12-12 20:57:35 +01:00
Nicolas Tsiftes
a8a9b66eff
Merge pull request #457 from adamdunkels/push/uip6-bugfixes
...
IPv6 bugfixes
2013-12-12 05:02:39 -08:00
Nicolas Tsiftes
75cbf4f48a
Merge pull request #479 from adamdunkels/push/cleanup-xmac-and-lpp
...
Remove xmac.c and lpp.c
2013-12-04 04:57:27 -08:00
Nicolas Tsiftes
7b1e3d1c94
Merge pull request #460 from adamdunkels/push/routelist
...
IPv6 routes LRU
2013-11-29 05:23:05 -08:00
Adam Dunkels
0908924f91
Removed the lpp.c code
2013-11-28 15:24:40 +01:00
Adam Dunkels
f86aaf7c14
Removed the xmac.c code
2013-11-28 15:24:22 +01:00
Nicolas Tsiftes
db4cada4e7
Merge pull request #462 from adamdunkels/push/no-reserved-double-inclusion-defines
...
Remove all leading double underscore inclusion #defines
2013-11-26 14:26:37 -08:00
Benoît Thébaudeau
4deba89f81
rdc: duplicate packets: Keep only the last sequence number for each address
...
According to IEEE 802.15.4e (§6.4.3.9), in order to detect duplicate received
MAC-layer frames, only the most recently received frame's sequence number needs
to be stored for each unique device address. Doing so limits the possible false
duplicate packet detections to a single sequence number. This also allows to
keep the last sequence number of more device addresses for the same value of
MAX_SEQNOS.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 13:01:11 +01:00
Benoît Thébaudeau
477a4a7178
rdc: duplicate packets: Factor out detection code
...
The code detecting duplicate packets in the RDC layer had been copied into most
RDC implementations. Factor it out into a new mac-sequence module in order to
have a single instance of this code.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 13:01:11 +01:00
Benoît Thébaudeau
14db3382af
csma: Initialize sequence number with random value
...
According to IEEE 802.15.4 (§5.1.6.1, §6.4.2), the MAC sequence numbers should
be initialized to random values. This was already the case in
framer-802154.c:create(), but not in csma.c:send_packet(), sometimes causing
false detections of duplicate MAC-layer packets in other devices when a device
was restarted too quickly. This patch decreases the probability of such an
event.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
2013-11-25 13:01:11 +01:00
Nicolas Tsiftes
acee82abbb
Merge pull request #456 from adamdunkels/push/6lowpan-changes
...
6lowpan changes
2013-11-24 15:37:12 -08:00
Adam Dunkels
bb2dcaa057
A massive all-tree automated update of all double inclusion guard #defines that changes from using two underscores as a prefix, which are reserved, to not using two underscores as a prefix
2013-11-24 20:20:11 +01:00
Nicolas Tsiftes
7283e48f09
Merge pull request #454 from adamdunkels/push/dao-updates-rebased
...
RPL feather mode
2013-11-24 07:49:49 -08:00
Adam Dunkels
b0460317b8
Moved variable declaration to the start of the function block
2013-11-24 15:17:52 +01:00
Adam Dunkels
faff1c2a7e
Preliminary support for RPL node types. This change allows a node to be in any of three given types:
...
* Mesh: this is the normal case. Nodes route data on behalf of others and the node can be reached via a DAO route.
* Leaf: the node does not route data on behalf of others, but others can route data to the node (it has a RPL DAO route).
* Feather: this is a new type of node. A feather node routes data on behalf of others, but does not install DAO routes in the network. Feather nodes allow having a larger number of nodes than the RPL network can sustain in terms of routing tables.
This commit introduces the RPL node types and the feather mode, but does not add support for the leaf node type.
2013-11-24 15:17:52 +01:00
Adam Dunkels
af24d07848
Forward no-path DAOs up the tree to allow the root to repair the network if needed
2013-11-24 15:17:52 +01:00
Adam Dunkels
9039b0ecd8
Remove references to the now unused dag->parents list
2013-11-24 15:17:52 +01:00
Adam Dunkels
4e6fe7dda6
Add a neighbor table entry if a DAO is received from a node where we don't yet have a neighbor table entry.
2013-11-24 15:17:52 +01:00
Adam Dunkels
490791eaa4
Add a check for the case when the parent neighbor may have gone away to avoid using a NULL pointer
2013-11-24 15:17:52 +01:00
Adam Dunkels
0ed7db0f9b
Slight improvements in debug messages
2013-11-24 15:17:52 +01:00
Adam Dunkels
fc1adec1b8
Made it a bit more clear what function that gets called when a neighbor is removed
2013-11-24 15:17:51 +01:00
Adam Dunkels
61ea7fbb1c
RPL DAO timers and management:
...
* Added a DAO lifetime timer that sends out a new DAO after half the lifetime of the DAO. This allows implementing DAO route soft state that avoids routing tables in the network keeping stale routes for ever.
* Added ways to schedule a new DAO transmission as well as cancelling an active DAO transmit timer, which makes it possible to do nodes that don't send DAOs.
2013-11-24 15:17:51 +01:00
Adam Dunkels
454088c117
Removed old, unused rawpacket code
2013-11-24 11:02:35 +01:00
Adam Dunkels
19b32c54c0
Removed the old unused hc.[ch] code
2013-11-24 11:02:35 +01:00
Adam Dunkels
9819c5b5b8
Rewrote the IPv6 route management so that all routes are maintained on a list that is ordered by the time at which the route was accessed. If a new route is added to the system, the oldest route is dropped.
2013-11-22 18:00:47 +01:00
Adam Dunkels
ea4bc3816f
Produce an error if the UIP_TCP_MSS is too large for UIP_BUFSIZE
2013-11-22 15:46:48 +01:00
Adam Dunkels
61a8fa9977
Allow the default TTL to be configured with UIP_CONF_TTL
2013-11-22 15:44:48 +01:00
Adam Dunkels
d577d03e21
Bugfix: correctly handle the case if uip_sappdata is NULL.
2013-11-22 15:38:20 +01:00
Adam Dunkels
f31d6f271f
Bugfix: if a SYN is received in the SYN_RCVD state we should not send a blank SYN, but a SYNACK in response.
2013-11-22 15:37:21 +01:00
Adam Dunkels
b31e84649a
If the 6lowpan layer is currently reassembling a packet, and a non-fragmented packet comes along, this is a sign that one of the fragments were lost (as they normally would arrive back-to-back, in sequence). So we'll grab the non-fragmented packet instead of dropping it.
2013-11-22 15:12:02 +01:00
Adam Dunkels
3788b08780
Added a way to get the RSSI of the last received packet
2013-11-22 15:10:44 +01:00
Ari Suutari
c1c64dd1cc
Received UDP packet was counted twice in statistics, first in udp_input and then again in udp_found.
...
Fix this to use same logic as in uip.c: valid packet is counted only in udp_found.
2013-11-22 08:16:05 +02:00
Nicolas Tsiftes
0e24fb0bc0
Merge pull request #432 from adamdunkels/push/154-len
...
Allow the 802.15.4/6lowpan code to operate on packets larger than 256 bytes
2013-11-20 05:23:26 -08:00
Nicolas Tsiftes
263e212427
Merge pull request #431 from adamdunkels/push/ipv6-const
...
Make IP addresses const
2013-11-20 04:26:05 -08:00
Nicolas Tsiftes
d183b87f4b
Merge pull request #434 from adamdunkels/push/cleanup-sys
...
Remove old unused code from the core/sys/ directory
2013-11-19 09:53:57 -08:00
Adam Dunkels
84fd0f9ae1
Removed out-commented timetable code
2013-11-19 08:21:53 +01:00
Adam Dunkels
5e9a76d38e
Removed old unused tcpdump.c code
2013-11-19 00:24:18 +01:00
Adam Dunkels
f9cb6ec2fa
Added the const keyword to IP address arguments that are not (and should not be) changed by the callee
2013-11-18 00:55:57 +01:00
Adam Dunkels
f26e35cffa
Allow the 6lowpan code to handle packets larger than 256 bytes
2013-11-16 14:44:14 +01:00
Adam Dunkels
bec721d313
Allow payload len to be larger than 256 bytes
2013-11-16 14:22:48 +01:00
Laurent Deru
fd97136fee
As RPL Root, drop an incoming DIO from the same instance but different DAG
2013-11-15 08:48:29 +01:00
Adam Dunkels
a6227e1e3e
Merge pull request #350 from AriZuu/udp-stats-fix
...
Fix UDP statistics.
2013-11-14 23:39:16 -08:00
Ari Suutari
8ffd29616a
Fix UDP statistics also in ipv6 code.
2013-11-15 08:00:41 +02:00
Nicolas Tsiftes
5688650f6d
Merge pull request #391 from cetic/fix-duplicate
...
Removed duplicate code in rpl-icmp6
2013-11-14 12:35:24 -08:00
Simon Duquennoy
03dcca15cb
Implement a truncated exponential backoff for csma
2013-11-14 15:02:36 +01:00
Sébastien Dawans
a60d3bf6cf
Removed duplicate code in rpl-icmp6
2013-10-23 15:43:16 +02:00
Enrico Joerns
4ba22102fd
[core/net/mac] Removed invalid struct member u8 in PRINTADDR
2013-10-15 01:43:26 +02:00
Simon Duquennoy
677b5ede16
Fixed printout that used deprectated rpl_parent_t structure
2013-10-08 14:46:55 +02:00
Adam Dunkels
4e1beb3ed3
Merge pull request #361 from nvt/rpl-mrhof-fix
...
MRHOF fixes
2013-10-07 11:45:31 -07:00
Adam Dunkels
bf7edf6c4c
Merge pull request #354 from lab11/core-net-fixes
...
Small fixes to networking files
2013-09-26 23:43:07 -07:00
Nicolas Tsiftes
43b5425493
Cleaned up various fragments and fixed a compilation error that occured when switching metric container.
...
Fixed a wrapping problem in the ETX EWMA calculation.
Corrected the multiplier of the link metric, and simplified the configuration
so that the user does not need to specify the multiplier.
2013-09-23 15:58:42 +02:00
Adam Dunkels
50395666fc
Merge pull request #341 from ismb-pert/fix-lladdr
...
Fixed fail to build from source due to a bad &nbr->lladdr
2013-09-14 03:24:12 -07:00
Zhen-Huan Hwang
b5815e8509
Fixed a typo in net/uipopt.h
2013-09-11 18:30:31 +03:00
Brad Campbell
bc762b6dd6
Small fixes to networking files
...
1. Added #include header
2. Fixed #defines that weren't updated
3. Small change to comment that now points to correct RFC section
2013-09-09 20:48:11 -04:00
Oliver Schmidt
c4bba3e89a
Removed unnecessary code from resolver.
2013-09-09 21:35:51 +02:00
Gianfranco Costamagna
2afea590f7
Fixed fail to build from source due to a bad "&nbr->lladdr" reference
2013-09-06 22:11:19 +02:00
Ari Suutari
35c7314093
Fix UDP statistics.
2013-09-05 20:37:01 +03:00
Oliver Schmidt
e0ddea2a17
Removed unnecessary code from resolver.
2013-09-01 20:23:11 +02:00
Sébastien Dawans
78e807403c
Inserts missing IPv6 Hop-By-Hop RPL Option at first hop
2013-08-19 21:40:24 +02:00
Adam Dunkels
86e247025a
Removed debugging printout that came before a local variable declaration, which seems to have broken sdcc
2013-08-19 17:48:33 +02:00
Adam Dunkels
bfd7e5f25b
Fixed a few bugs in the route handling code. While bughunting, rewrote parts of the code to make its intention clearer. Also added a bunch of comments to make the logic of the code more evident.
2013-08-19 17:48:32 +02:00
Adam Dunkels
8dc4e46968
Check if the nexthop neighbor for a given route has disappeared. If so, we drop the route too. If we happen to be the RPL root, we also initiate a global repair as the neighbor may moved.
2013-08-19 17:48:32 +02:00
Adam Dunkels
d0a939afb0
Bugfix: must multiply with ETX divisor to turn into fixed-point format.
2013-08-19 17:48:32 +02:00
Adam Dunkels
4d0ecaae02
Make sure our parent's IP address isn't NULL.
2013-08-19 17:48:32 +02:00
Adam Dunkels
e5a6565137
Loop detection via DAO: if we get a DAO from a parent, that parent thinks we are its parent. We poison it and recalulate our parents.
2013-08-19 17:48:32 +02:00
Adam Dunkels
34119b7ef2
Poor man's loop reparation: reset the DIO timer and hope the neighbor learns a better route.
2013-08-19 17:48:32 +02:00
Adam Dunkels
d830e9df3f
Implement forwarding error handling: if a packet changes direction, we set the FWD_ERR flag. If we see the FWD_ERR flag, we drop the route that we sent it to. If we are the root node, we also initiate a global repair.
2013-08-19 17:48:31 +02:00
Adam Dunkels
abb3ef9b3b
Bugfix: don't set the parent if the dag is NULL
2013-08-19 17:48:31 +02:00
Adam Dunkels
08761dfd8a
Added a function uip_ds6_nbr_num() for getting the number of neighbors
2013-08-19 17:48:31 +02:00
Adam Dunkels
a027832f94
Fixed a bunch of compiler warnings
2013-08-19 17:48:31 +02:00
Adam Dunkels
9a74ada90c
Added a function rpl_get_parent_link_metric() for obtaining the link metric of a given parent
2013-08-19 17:48:31 +02:00
Adam Dunkels
c52fc2fd19
Defensive programming: check for the argument being NULL.
2013-08-19 17:48:31 +02:00
Adam Dunkels
b42ccaed1b
Added function prototypes to a number of functions with void arguments
2013-08-19 17:48:31 +02:00
Adam Dunkels
82e8eb420d
Added and updated debugging printouts and reformatted code to make it a little easier to read.
2013-08-19 17:48:31 +02:00
Simon Duquennoy
248301a041
Fix naming issues and includes in uip-ds6-nbr.h
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ff093a2b50
Removed now unused per-module neighbor table size configs. Use NEIGHBOR_CONF_MAX_NEIGHBORS instead.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
c3f62b24c8
Moved ETX management from neighbor-info to rpl-of-etx. Avoids conversions between different fixed point representations, and simplifies neighbor management. Makes more clear how default-ETX and noack-ETX actually affect the rank. Removed neighbor-info and neighbor-attr.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
c50d10aa53
Make RPL use neighbor tables. RPL locks the neighbor used as preferred parent.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
09d26f8060
Make uip-ds6-route use neighbor table. Instead of storing a global list of routing entries that contain both the next hop and the destination, we have a separate list of reachable destination for each neighbor in the global table.
2013-08-19 17:48:30 +02:00
Simon Duquennoy
ec609b49eb
Make DS6 neighbors use neighbor-table, and move all DS6 neighbor management from uip-ds6 to a new uip-ds6-neighbor module.
2013-08-19 17:48:30 +02:00