Commit graph

2815 commits

Author SHA1 Message Date
Robert Olsson 29914b5a1f Fixing input serial line initialization pointed by Peter Sjödin/KTH
For avr-rss2 platform
2017-03-24 16:57:03 +01:00
Peter Sjödin fa6c52633f Use RS232_BAUDRATE to define baudrate from projekt config file.
Removed serial initialization from contiki-main.c. It seems to be
too soon.
2017-03-24 16:56:42 +01:00
Robert Olsson 9e5aed5df6 Support for changing PANID and channel from project-conf.h
modified:   cpu/avr/radio/rf230bb/rf230bb.c
	modified:   platform/avr-rss2/contiki-conf.h
	modified:   platform/avr-rss2/contiki-main.c
2017-03-24 16:56:22 +01:00
Oliver Schmidt 356814fe9c Merge pull request #2146 from oliverschmidt/slip
Add SLIP support to retro platforms.
2017-03-18 15:56:06 +01:00
George Oikonomou dc782732e0 Merge pull request #2132 from JoaoS/energest_avr_rss2
add CPU energest measurements that were lacking in this platform
2017-03-18 13:17:51 +00:00
Oliver Schmidt a0134ff35e Beautified SLIP macros. 2017-03-18 14:06:11 +01:00
Oliver Schmidt 79855ff02d Beautified SLIP macros. 2017-03-18 14:05:36 +01:00
Atis Elsts a0a2881ab0 CC26xx SensorTag I2C: add and use LIMITED_BUSYWAIT macro 2017-03-14 18:52:10 +00:00
root cc4aa440a0 moved energest init to after the rtimer init 2017-03-13 13:54:40 +00:00
root 42cbe85a49 add CPU energest measurements that were lacking in this platform 2017-03-08 16:13:27 +00:00
Laurent Deru da45afdf27 Add basic contikimac parameters for jn516x 2017-03-08 15:25:55 +01:00
Laurent Deru 79b06879fe Add to jn516x micromac driver full MAC layer support 2017-03-08 15:25:55 +01:00
Simon Duquennoy 0ceb45ee78 Merge pull request #2129 from simonduq/pr/update-jn516x-sdk
jn516x: update SDK
2017-03-08 15:20:31 +01:00
Simon Duquennoy 04bce213e6 jn516x: remove redundant declaration 2017-03-08 12:13:37 +01:00
Oliver Schmidt 91beb8670f Added SLIP support to retro platforms.
The cc65 tool chain comes with V.24 drivers so it seems reasonable to use the existing Contiki SLIP driver to implement network access via SLIP as alternative to Ethernet.

Some notes:
- The Ethernet configuration was simplified in order to allow share it with SLIP.
- The Contiki SLIP driver presumes an interrupt driven serial receiver to write into the SLIP buffer. However the cc65 V.24 drivers aren't up to that. Therefore the main loops were extended to pull received data from the V.24 buffers and push it into the SLIP buffer.
- As far as I understand the serial sender is supposed to block until the data is sent. Therefore a loop calls the non-blocking V.24 driver until the data is sent.

On all platforms there's only one V.24 driver available. Therefore V.24 drivers are always loaded statically.

On the Apple][ the mouse driver is now loaded statically - independently from SLIP vs. Ethernet. After all there's only one mouse driver available. However there's a major benefit with SLIP: Here all drivers are loaded statically. Therefore the dynamic module loader isn't necessary at all. And without the loader the heap manager isn't necessary at all. This allows for a reduction in code size roughly compensating for the size of the SLIP buffer.
2017-02-15 23:43:28 +01:00
Oliver Schmidt a26ee64dc0 Merge pull request #2097 from oliverschmidt/master
Removed artifacts of former uip_appdata handling.
2017-02-13 20:05:57 +01:00
Oliver Schmidt 6463c91a4f Removed artifacts of former uip_appdata handling.
Adam Dunkels writes on 2/5/2017 on the Contiki mailing list:
[...] the original idea was that the application could just point the uip_appdata pointer to wherever the data was, but we then changed it so that the data actually had to be copied into the uip_aligned_buf buffer. So, yes, the network device driver should only need to read from this buffer. [...]

This change removes comments on the possibility of uip_appdata pointing somewhere outside the uip_aligned_buf. And it removes code in the SLIP drivers not necessary anymore.

Additionally it makes code in a SLIP driver optional that takes care of the Microsoft-specific CLIENT / SERVER / CLIENTSERVER chat.
2017-02-05 23:20:39 +01:00
Simon Duquennoy 263af6f642 Merge pull request #2023 from OpenMote/master
Adding support for OpenMote-CC2538 Rev.A1 and OpenUSB
2017-02-02 08:47:07 +01:00
Oliver Schmidt a6472c8dd9 Revert to static Ethernet driver for the ATARI.
After all there's no momentum for a W5100-based Ethernet solution on the ATARI. So I revert to static linkage of the CS8900A driver as this improves program load times.
2017-01-27 00:18:25 +01:00
George Oikonomou 7b7781360f Merge pull request #2071 from g-oikonomou/bugfix/cc13xx/no-acks
Make the number of Prop Mode RX Buffers easy to configure
2017-01-21 00:17:49 +00:00
Laurent Deru 12c930893c Fix semantic of UIP_ND6_SEND_NA and add UIP_ND6_SEND_NS 2017-01-16 15:48:14 +01:00
George Oikonomou 5fb226f4c9 Make the count of prop mode RX buffers configurable 2017-01-15 12:31:09 +00:00
Nicolas Tsiftes c1f11cfaa9 Merge pull request #2034 from Vinggui/patch-1
Fixing Avr-Zigbit Makefile not compiling.
2017-01-12 07:49:30 +01:00
Pere Tuset 361cb612a7 Reduce bootloader baudrate to be on the safe side. 2017-01-10 10:59:06 +01:00
Antonio Lignan 82f3ce392e Merge pull request #2028 from joakimeriksson/minimal-net-ND-fix
added support for 6-bytes link-layer address
2017-01-10 09:07:50 +01:00
Antonio Lignan 247d79ea7c Merge pull request #2011 from jdede/z1-llsec
Enable llsec on Z1 nodes
2017-01-10 09:07:27 +01:00
George Oikonomou 960b81d484 Merge pull request #2024 from alignan/pull/eth-gw
Zolertia Orion ethernet router with active POE support
2017-01-09 21:03:45 +00:00
George Oikonomou 14757201a5 Merge pull request #2027 from alignan/pull/fix-adc-channels
zoul: fix a bitmask bug in channels used
2017-01-09 21:02:20 +00:00
Vinicius Guimaraes 42557bf484 Fixing Avr-Zigbit Makefile not compiling.
I just tried to compile this platform for my Zigbit mote (AT86RF230) here in a hello-world example, but it didn't work.
I reviewed this makefile and found that the request to compile "frame.c" was not necessary and bring up a missing error:
"make: *** No rule to make target `obj_avr-zigbit/frame.o', needed by `contiki-avr-zigbit.a'.  Stop."
Frame.c is already inserted in radio's makefile.

Another problem was the undefined reference created by the missing module "core/net":
"contiki-avr-zigbit.a(sicslowpan.o): In function `input':"
"contiki/examples/hello-world/../../core/net/ipv6/sicslowpan.c:1521: undefined reference to `link_stats_input_callback'"

Both solved now. Hope it helps anyone else.
2017-01-04 16:58:53 -02:00
Antonio Lignan a7e617657a zoul: fix a bitmask bug in channels used 2016-12-29 14:19:32 +01:00
Antonio Lignan fb9c6009a2 Fixed Firefly revision A image links 2016-12-29 13:40:50 +01:00
Antonio Lignan a98792a79f Updated ARM toolchain information 2016-12-29 13:38:09 +01:00
Antonio Lignan 6bda852052 Updated maintainer info 2016-12-29 13:32:35 +01:00
Antonio Lignan 579620ce0e Added Zolertia Orion ethernet router with active POE support 2016-12-29 13:07:53 +01:00
Pere Tuset 93828d867e Updated OpenMote-CC2538 README.md file with new features. 2016-12-29 12:30:58 +01:00
Pere Tuset b72110fe8a Add support for the OpenMote-CC2538 Rev.A1 board that uses the CC2538SF23 (256 KB) chip instead of the CC2538SF53 (512 KB) chip. 2016-12-29 12:10:21 +01:00
Pere Tuset 1a993da8fc Add support for automatic bootloading with the cc2538-bsl.py script on the OpenUSB carrier board. 2016-12-29 12:09:07 +01:00
Antonio Lignan cf2b24971b Merge pull request #1978 from makrog/pr/cc1200-fixes
Added NullRDC and ContikiMAC timings for Zolertia RE-Mote.
2016-12-23 18:31:47 +01:00
Jens Dede 7b2c687789 Use hardware-AES on z1 as default 2016-12-22 20:08:19 +01:00
Jens Dede 0b68334e95 Enable llsec on Z1 nodes 2016-12-21 14:54:15 +01:00
Antonio Lignan 3594cf5167 zoul: default cc2538-bsl baudrate to 460800 2016-12-20 18:18:28 +01:00
Antonio Lignan 7927af021e Minor cosmetic change 2016-12-16 15:47:13 +01:00
Antonio Lignan ac2a31455e Merge pull request #1957 from alignan/pull/bme280-sensor
sensors: bme280 weather sensor
2016-12-10 18:37:21 +01:00
Antonio Lignan bd3f8fa3c5 Merge pull request #1939 from bthebaudeau/re-mote-sd-fat
Add global SD/MMC and FAT support, with RE-Mote as an example
2016-12-10 18:32:39 +01:00
Nicolas Tsiftes ece7cfee38 Merge pull request #1835 from mdlemay/gp-exc-handler
galileo: Add general protection exception handler
2016-12-08 20:12:45 +01:00
Antonis Makrogiannakis ba241db968 Added NullRDC and ContikiMAC timings for Zolertia RE-Mote.
CC1200 SubGHz 50 Kbps mode.
2016-12-06 13:34:26 +02:00
Nicolas Tsiftes f09e84976a Merge pull request #1950 from yatch/pr/update-for-tsch-cooja-mote
Miscellaneous updates for tsch-cooja-mote
2016-12-05 18:40:28 +01:00
Antonio Lignan 2be999c707 Merge pull request #1967 from MohamedSeliem/patch-9
Fix the leftover mentions of aaaa as a prefix to be UIP_DS6_DEFAULT_PREFIX (now fd00)
2016-12-04 12:46:07 +01:00
Mohamed Seliem 82b5fb5073 Fix the leftover mentions of aaaa as a prefix to be UIP_DS6_DEFAULT_PREFIX (now fd00) 2016-12-04 03:29:49 +02:00
George Oikonomou d6656ccde1 Fix minor typo 2016-12-03 23:26:25 +00:00