Commit graph

1039 commits

Author SHA1 Message Date
nvt
20171985c6 Split the RPL header into a private and a public header. 2011-02-11 16:21:17 +01:00
Adam Dunkels
706045120f Changed the variable name local_confidence to etx to better reflect what it was used for 2011-02-11 14:18:57 +01:00
Adam Dunkels
ba6bf7dd6b Rewrote the parent selection to favour parents with a low ETX and a good rank. The old parent selection would always favour parents with a lower rank, regardless of their ETX, which in some cases lead to suboptimal parent selections. Also, the old code was buggy in that it would always pick the worst parent (the one with the highest ETX). 2011-02-11 14:17:26 +01:00
Adam Dunkels
bb8377dfee Set the end-of-stream flag on the TCP FIN packet 2011-02-10 22:47:45 +01:00
Joakim Eriksson
d24c63c0f1 fixed so that minhoprankinc is configurable 2011-02-10 19:44:12 +01:00
Adam Dunkels
8d55a68ebe Added a PACKETBUF_ATTR_STREAM_END packet flag 2011-02-08 22:20:07 +01:00
Adam Dunkels
46348d9013 Added the low-power streaming mode where frequent channel checks are performed when streaming is on. Enabling this will (by setting WITH_STREAMING to 1), however, significantly slow down Cooja/MSPsim simulations. 2011-02-08 21:57:46 +01:00
Joakim Eriksson
d518c84471 made rank calculation depend on selected parent when joining DAG 2011-02-08 19:59:50 +01:00
Nicolas Tsiftes
aeca16d01f Just update the node rank and let rpl_process_parent_event take care of the rest 2011-02-07 17:29:23 +01:00
Nicolas Tsiftes
e3638d2791 Updated to the minrank-hysteresis OF 2011-02-04 15:46:01 +01:00
joxe
389a4f9220 added rpl-all-nodes multicast address to nodes mcast addresses 2011-01-25 22:41:30 +00:00
adamdunkels
09c223f549 Updated Contiki X-MAC to use hardware acks, which allows for tighter timing and results in a lower duty cycle. Hardware acks also make X-MAC more robust against packet losses, as there is a direct way for the CSMA layer to detect loss of data packets. Before, Contiki X-MAC only detected loss of strobes. 2011-01-25 14:31:09 +00:00
adamdunkels
d51e99a3dd Updated streaming mode to use only about 20% radio. Made guard time more conservative due to problem report by Ricklef Wohlers. 2011-01-25 14:29:46 +00:00
adamdunkels
fa524fabd7 Bugfix: q->buf was not tested for NULL, as it should be. Fix by Simon Duquennoy. 2011-01-25 14:24:38 +00:00
joxe
e79c0ab1ee fixed rpl so that it sends and receives on the rpl-all-nodes multicast address 2011-01-25 09:55:12 +00:00
joxe
3a643fa0c6 added address macros for rpl-all-nodes 2011-01-25 09:54:03 +00:00
adamdunkels
4b4b8fad56 More recent packet entries. Allow 4 queue entries to be dedicated to generated packets. 2011-01-18 16:05:53 +00:00
adamdunkels
808c21fbfa Bugfix: default should be 3 MAC-level retransmissions if collissions or loss occurs 2011-01-18 16:03:57 +00:00
adamdunkels
affba785b5 Enabled phase-lock only for channel check rates of 32 Hz or lower 2011-01-18 16:03:19 +00:00
adamdunkels
26e3b6fdc0 Bugfix by Simon Duquennoy: don't transmit packet until previous packet has been sent by the RDC layer. 2011-01-13 19:06:22 +00:00
adamdunkels
81d23a3a36 Minor bugfixes pertaining to queue handling: if a packet was explicitly dropped, the packet would later be acknowledged despite it never being received; added a limit on how many queue entries that can be used for packets that are being forwarded, to allow for originated packets even if the forwarding queue is filled. 2011-01-10 15:10:43 +00:00
adamdunkels
70f9f075a0 Safeguard against NULL arguments 2011-01-10 15:08:52 +00:00
adamdunkels
148bd60fe1 Bugfix: the defensive retransmission timer setting must be made before the packet is transmitted, otherwise the retransmission timer will always be for the defensive retransmit 2011-01-09 23:49:27 +00:00
adamdunkels
50a3e6ea23 Increased the max ETX to allow for longer paths even with the initial conservative ETX estimate; made collect use announcements by default 2011-01-09 23:48:33 +00:00
adamdunkels
acf45ec648 Bugfix: memory wasn't freed when a neighbor was dropped from the list. Also increase the max age to 180 minutes to allow for regular beacons to refresh the neighbor before it is dropped. 2011-01-09 21:20:05 +00:00
adamdunkels
90dc0ceebf Replaced default link estimator with an exponential weighted moving average, which reduces memory consumption per neighbor. 2011-01-09 21:14:22 +00:00
adamdunkels
4e91d9303e Added safeguard timer if the MAC layer would fail to call back after transmission. 2011-01-09 21:13:20 +00:00
adamdunkels
a0960154ba Cleaned up parts of the code; added comments 2011-01-09 21:07:01 +00:00
nvt-se
30f5e29db7 dos2unix conversion 2011-01-05 17:01:03 +00:00
joxe
65048c519c removed some void * casts in uip code 2011-01-04 22:11:37 +00:00
nvt-se
7a43b7d832 Configuration of the objective function made easier. Updated OF0 to the new rank calculation. 2011-01-04 20:43:28 +00:00
joxe
b2296e462b removed void * + changed ux_t to uintx_t 2011-01-04 20:22:21 +00:00
dak664
3c3cd868cd Allow shorter UIP_CONF_WAIT_TIMEOUT for more aggressive power saving modes. 2010-12-24 00:39:04 +00:00
dak664
322d835fee Fix avr-gcc compiler warnings 2010-12-18 22:12:53 +00:00
nvt-se
8f76c82433 Improved DAO management. 2010-12-17 15:24:25 +00:00
adamdunkels
4914739e5d Revived the timesynch module, which has been switched off since the introduction of the new radio API after Contiki 2.4. The new code uses explicit timestamp messages instead of piggybacking timestamps on every transmission. It is also significantly better in terms of exactness. 2010-12-16 22:47:38 +00:00
adamdunkels
10fb99a89d Reduced the value of the max depth, so that a count-to-infinity loop will not count too long before hitting the maximum value. This is important when a network loses its sink, so that packets are not forwarded around the network for ever. 2010-12-16 22:46:34 +00:00
adamdunkels
19e930e6f2 Changed the behaviour of retransmissions to work better with the in-order CSMA code. The retransmission timer is now set when the packet is known to be sent by the MAC layer. 2010-12-16 22:45:15 +00:00
adamdunkels
4a89cc9db3 Rework of the new CSMA in-order code that fixes a number of smalllish bugs in the in-order code. 2010-12-16 22:44:02 +00:00
adamdunkels
79f2c25dae Rework of the phase-lock optimization mechanism. There were several bugs in the existing code, such as the phase-lock would lose synchronization when a packet was lost. 2010-12-16 22:43:07 +00:00
adamdunkels
01c28ab502 Added explicit timestamp packet type, for the revived timesynch support 2010-12-16 22:41:43 +00:00
nvt-se
dae3dc22f3 Corrected a comment that was accidentally overwritten in a previous commit 2010-12-15 19:57:40 +00:00
nvt-se
cd08939b38 Corrected the reported ETX in the initial callback, and fixed the coding style 2010-12-15 14:35:07 +00:00
nvt-se
79ae813f88 Improved macro definitions and removed obsolete declarations. 2010-12-15 13:37:34 +00:00
nvt-se
542bbd4b31 Increased the width of dio_next_delay to avoid possible wrappings 2010-12-15 12:24:00 +00:00
nvt-se
486f202d09 Fixed problem with too large values for the DIO timer. 2010-12-15 12:12:27 +00:00
dak664
a026c94467 Fix compiler warnings 2010-12-14 22:45:22 +00:00
dak664
0a4a0ffb32 Add SICSLOWPAN_CONF_ACK_ALL for hardware autoack testing 2010-12-14 22:18:20 +00:00
dak664
240d478c1f Allow platform to specify COLLECT_CONF_BROADCAST_ANNOUNCEMENT_MAX_TIME 2010-12-14 22:14:33 +00:00
adamdunkels
952dfc9384 Rework of the CSMA layer: instead of using one timer per packet, the module now uses one central timer and a queue of outgoing packets. This helps to keep packets in order, which is extremely useful for TCP transfers, and reduces the amount of congestion since consecutive packets now are spaced in time if there is a collision. Based on the observations and ideas of Simon Duquennoy. 2010-12-14 07:57:14 +00:00