Michael LeMay
1f445172ff
galileo: Fix build help message in examples
...
This patch fixes examples/galileo/Makefile so that it actually
displays the intended help message when an unrecognized EXAMPLE is
selected.
2016-02-16 21:19:44 -08:00
Michael LeMay
b82d92e373
galileo: Add I2C callbacks example
...
This patch adds an example for I2C callbacks that is very similar to
the i2c-LSM9DS0 example except that it uses a PWM device that is built
into the platform.
2016-02-16 21:19:44 -08:00
Michael LeMay
58874ea25d
x86, galileo: Refactor I2C and GPIO initialization
...
This patch revises the I2C and GPIO initialization code to always be
run during platform boot rather than within each process that requires
it.
This patch also revises the gpio-output example to use a pin that is
set as an output by the default pinmux configuration. Previously, it
used a pin that was set as an output by the pinmux configuration that
is in effect when the OS does not change the pinmux configuration.
2016-02-16 21:19:44 -08:00
Michael LeMay
3e64447631
galileo: Expand README for examples
...
This patch expands the instructions in examples/galileo/README.md.
2016-02-16 21:19:44 -08:00
Michael LeMay
c9bffe6d5a
galileo: Convert README for examples into README.md
...
This patch renames and reformats examples/galileo/README to use
Markdown.
2016-02-16 21:19:44 -08:00
Michael LeMay
c815fa4511
x86: Use shared ISR for I2C and GPIO
...
This patch permits interrupts to be generated by both the I2C and GPIO
controllers for simultaneously-executing applications. The controllers
share a single interrupt pin, INTC. Prior to this patch,
quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an
incorrect assumption that INTA is connected to the GPIO controller),
and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C
controller initialization is a prerequisite for GPIO initialization,
so the final configuration was that INTA and INTC were both routed to
PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if
the I2C controller was actually responsible for the interrupt.
This patch refactors the I2C and GPIO ISR setup and handler code so
that the shared portions are combined in
cpu/x86/drivers/legacy_pc/shared-isr.[ch]. The I2C and GPIO drivers
communicate their interrupt information to the shared component by
placing structures in a specific section of the binary.
2016-02-16 21:19:44 -08:00
Antonio Lignan
0e17b98372
Merge pull request #1518 from Zolertia/pm10-remove-issue
...
Removed PM10 code lines from adc-sensors driver
2016-02-15 17:38:36 +01:00
Toni Lozano
2cbde75b02
Removed PM10 code lines from adc-sensors driver
2016-02-15 14:45:26 +01:00
Antonio Lignan
0dbed519a5
Merge pull request #1507 from Zolertia/remote-voc-test
...
Added VOC (iAQ-Core) drivers and test application
2016-02-15 12:21:32 +01:00
Aitor Mejias
cb1e7c2c45
Added VOC (iAQ-Core) drivers and test application
2016-02-15 11:00:48 +01:00
Antonio Lignan
4cd0e3ad35
Merge pull request #1516 from alignan/pull/weather-meter-contikimac
...
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 23:02:17 +01:00
Antonio Lignan
25ff850a43
Weather meter: replaced rtimer by ctimer as it was breaking contikimac
2016-02-13 22:33:05 +01:00
Antonio Lignan
c6ded00dc4
Merge pull request #1512 from alignan/pull/fix-z1-websense
...
Fix z1-websense example
2016-02-13 16:35:50 +01:00
Antonio Lignan
b2b573e9e7
Fix z1-websense example
2016-02-12 19:10:02 +01:00
Simon Duquennoy
99de563e8d
Merge pull request #1503 from amitgeron/route_discovery_typo
...
Typo
2016-02-08 13:35:03 +01:00
Amit Geron
ba6419cc25
Typo
...
* route_discovery_expicit_open --> route_discovery_explicit_open
2016-02-07 11:58:31 +02:00
Simon Duquennoy
daa83ee3ef
Merge pull request #1404 from amitgeron/route_discovery_channels
...
Add route_discovery_explicit_open()
2016-02-05 23:12:39 +01:00
Simon Duquennoy
5afdae1399
Merge pull request #1498 from alignan/pull/fix-ip64-warnings
...
Fix ip64 warnings and error
2016-02-05 23:02:39 +01:00
Benoît Thébaudeau
287092db42
Merge pull request #1486 from alignan/pull/cc2538-common
...
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 23:48:35 +01:00
Antonio Lignan
45c125949a
Unified cc2538 examples into single cc2538-common placeholder
2016-02-04 17:26:11 +01:00
Nicolas Tsiftes
9b3e334c7d
Merge pull request #1497 from simonduq/pr/shell-warnings
...
Fix compiler warnings in shell
2016-02-04 13:14:26 +01:00
Nicolas Tsiftes
4dce5f6765
Merge pull request #1494 from simonduq/pr/uip6-debug
...
Minor debug output fixes
2016-02-04 13:09:21 +01:00
Simon Duquennoy
ebdc536d61
Merge pull request #1496 from simonduq/pr/jn516x-serial-input
...
jn516x enable serial input whenever there is no fallback interface
2016-02-04 10:02:15 +01:00
Antonio Lignan
c924567d86
Fix ip64 warnings
2016-02-04 00:26:54 +01:00
Simon Duquennoy
fa078381cf
Fix compiler warnings in shell
2016-02-03 18:01:25 +01:00
Simon Duquennoy
f87f7e7edd
jn516x enable serial input whenever there is no fallback interface
2016-02-03 17:53:29 +01:00
Simon Duquennoy
521cc7600d
Minor debug output fixes
2016-02-03 17:10:24 +01:00
Simon Duquennoy
9f383ba534
Merge pull request #1492 from simonduq/pr/jn516x-minor
...
Reworking jn516x default configuration and examples
2016-02-03 11:41:10 +01:00
Simon Duquennoy
658cf0d2cc
Reworking jn516x default configuration and examples
2016-02-03 10:35:48 +01:00
Simon Duquennoy
79a0709cd7
Merge pull request #1491 from simonduq/pr/sicslowpan-printf
...
Fix compiler errors and warnings in sicslowpan.c PRINTF statements
2016-02-03 09:35:05 +01:00
Simon Duquennoy
f0d1b6c5bb
Fix PRINTF statement in sicslowpan
2016-02-02 17:18:45 +01:00
Simon Duquennoy
5d67a612b4
Merge pull request #1402 from simonduq/pr/ci-simexec-log-output
...
Travis: improved output for failed Cooja simulation
2016-02-01 15:30:13 +01:00
Simon Duquennoy
77fac155c1
Merge pull request #1489 from simonduq/pr/jn516x-examples-tsch
...
Adding TSCH to examples/jn516x/rpl
2016-02-01 15:08:20 +01:00
Nicolas Tsiftes
eef96f3ba7
Merge pull request #1480 from mdlemay/revise-clang-flags
...
galileo: Revise include flags for LLVM Clang
2016-02-01 14:25:53 +01:00
Nicolas Tsiftes
deb39df3a3
Merge pull request #1478 from zq301/patch-11
...
a memory overflow in shell-vars.c
2016-02-01 14:25:06 +01:00
Simon Duquennoy
badc4b77f1
Merge pull request #1488 from simonduq/pr/jn516x-uart
...
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 14:19:44 +01:00
Simon Duquennoy
15a5f27080
Adding TSCH to examples/jn516x/rpl
2016-02-01 13:38:53 +01:00
Simon Duquennoy
7c3108bf3b
jn516x: flush only uart Tx FIFO in main loop, leaving Rx FIFO intact
2016-02-01 13:36:18 +01:00
Antonio Lignan
447286197f
Merge pull request #1487 from alignan/pull/weather-meter-wind-bane-fix
...
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 23:40:42 +01:00
Antonio Lignan
35345cdb40
Fixed casts and calculations for the wind direction circular averaging
2016-01-31 22:51:08 +01:00
George Oikonomou
7d6966b22c
Merge pull request #1483 from Zolertia/pm10-sensor
...
Added PM10, VAC and AAC sensor drivers
2016-01-27 11:47:07 +00:00
George Oikonomou
a2d7b87936
Merge pull request #1479 from g-oikonomou/bugfix/cc13xx/dont-mask-cmdsta
...
Allow the caller to access the entire content of CMDSTA
2016-01-27 11:46:01 +00:00
Toni Lozano
1f6dafecb0
Modified ADC measurement of PM10 driver to include adc-zoul direct access
2016-01-26 17:55:48 +01:00
Antonio Lignan
8337843d69
Minor fixes
2016-01-26 09:45:43 +01:00
Michael LeMay
6557194fc5
galileo: Revise include flags for LLVM Clang
...
This patch revises the compiler flags when LLVM Clang is in use to
cause Clang to automatically use its built-in header files rather than
those for GCC.
2016-01-25 14:01:16 -08:00
Antonio Lignan
9f1376d37a
Merge pull request #1453 from g-oikonomou/contrib/test-with-arm-gcc-5
...
Change travis arm tests to use gcc-arm-embedded v5
2016-01-25 21:32:28 +01:00
Toni Lozano
31e6cc48ca
Solved doxygen comments information from VAC, AAC and PM10 sensor files
2016-01-25 18:13:00 +01:00
Toni Lozano
42e1beb931
Added PM10 GP2Y1010AU0F sensor driver and demo test
2016-01-25 10:06:17 +01:00
Toni Lozano
4907842821
Added parameters of aac-sensor on adc-sensors file and adapted AAC and VAC test files for correct results
2016-01-25 10:05:43 +01:00
Toni Lozano
1fca3e810a
Added PM10 and VAC parameters to adc_sensors driver
2016-01-25 10:04:25 +01:00