Commit graph

27 commits

Author SHA1 Message Date
George Oikonomou 1a0f01ccc4 cc253x: Config to swap between UART and USB I/O
See Pull Request #18
2012-11-01 17:41:57 +00:00
Philippe Rétornaz eabaa0c8e4 cc253x: DMA Changes
- Fixed DMA irq flag clearing
- Added a dma_reset helper

See Pull Request #18
2012-11-01 17:41:49 +00:00
Philippe Rétornaz 898bd07810 cc253x: optionally push bits in p2 interrupt
See Pull Request #18
2012-11-01 17:41:46 +00:00
George Oikonomou c1d72475d7 cc253x: Renamed P2 interrupt-related files for better consistency
See Pull Request #18
2012-11-01 17:41:38 +00:00
George Oikonomou c60f0b4349 cc253x: P2-related routines are now bankable
We keep the ISR in its own file and move everything else
to a different one, so that we only have to keep the ISR
in HOME

See Pull Request #18
2012-11-01 17:41:32 +00:00
George Oikonomou d9d4fa168d cc253x: Renamed the P2 ISR
This is mainly a naming convention thing, we want to have 'isr'
as part of the name, instead of 'int'. We also want port_2 instead
of p2 because we already had port_1

See Pull Request #18
2012-11-01 17:41:28 +00:00
George Oikonomou fea4970142 cc253x: Configurable linkage for the P2 ISR
See Pull Request #18
2012-11-01 17:41:24 +00:00
Philippe Rétornaz ddc8120d7c cc253x: Add p2 interrupt handler
The P2 Interrupt is shared across many periferal (I2C, USB, GPIO).
This adds a generic interrupt handler on which the differents drivers
can register a handler.

See Pull Request #18
2012-11-01 17:41:11 +00:00
George Oikonomou fa5a38666b Removed redundant #else blocks 2012-09-20 15:09:15 +01:00
Philippe Rétornaz 48d99f15c8 cc253x: fix dma interrupt enable flag 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
2012-09-07 17:32:53 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
George Oikonomou 26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou 43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration
Report and fix by Tom Xiao
2012-07-11 10:53:14 +01:00
George Oikonomou 4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
George Oikonomou 47db065034 Bugfixed the cc253x UART0 init (Thanks, Deng Jian)
The flush instruction was resetting the stop bit level to 'low'
2012-06-06 15:25:57 +01:00
George Oikonomou 1f7171f943 Adjust cc2x3x ports to the new clock API 2012-05-16 15:22:31 +01:00
George Oikonomou 0d4b90c42b cc2530 watchdog improvements and cleanup 2012-05-16 15:22:31 +01:00
George Oikonomou e95f94a9a8 Added support for reading MAC from the cc253x flash
We still use the primary location by default (Info Page) but
this is now configurable. This change is useful for users who
wish to specify their own MAC address. Since the Info Page is
read-only, they need to be able to use the secondary location
2012-04-20 16:03:38 +01:00
David Kopf cac4e9a222 Add clock_delay_us and clock_set_seconds to clock.h. Modify clock_wait to use clock_time_t.
Remove the troublesome avr/dev/delay.* files.
Add PLATFORM_NAME and combine the confusing *_REVISION defines into a single PLATFORM_TYPE
2012-04-09 15:49:53 -04:00
George Oikonomou 57969259ce cc2x3x clock_delay(len) now delays for approx. len usecs 2012-04-03 16:26:11 +01:00
George Oikonomou 242e02658f The cc2530 UART driver was sending a 0 down the line on init 2012-04-03 16:26:10 +01:00
George Oikonomou b3de052e01 Ported the stack-friendly clock ISR code over from cc243x to cc253x 2012-04-03 16:26:10 +01:00
George Oikonomou ffa3a1c4c3 cc2x3x clock driver cleanup
* Bit-Addressable SFRs are now accessed as such,
  instead of (N)OR-ing the byte
* A routine was declared as CCIF but not defined as such. Fixed
* Deleted a leftover duplicate define
* Formatting
* Comment updates and clarifications
2012-04-03 16:26:10 +01:00
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00