adamdunkels
1d090ea0f5
Made configuration of CC2420 SFD timestamps easier
2010-12-16 22:49:33 +00:00
adamdunkels
c0fedd7661
Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module
2010-12-16 22:49:12 +00:00
dak664
570f6e705f
Move conditional needed by previous commit.
2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807
Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan.
2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a
Added a check for Coffee start address.
2010-12-15 15:01:00 +00:00
dak664
1cc336f188
Conditional code to use hardware multiply by default.
2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d
Added elfloader machine dependent code for STM32W.
2010-12-15 11:10:20 +00:00
dak664
c784e8bc46
Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register
2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9
Return TRAC_STATUS register when tx autoretry is enabled.
2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb
Add status page link, show correct rssi, fix indexing off array in ipv4 builds
2010-12-04 21:32:35 +00:00
dak664
58b7a19803
Hardware/software radio HAL patch from Roger Larsson.
...
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
2010-12-03 20:42:01 +00:00
dak664
21b10e8021
Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer
2010-12-03 18:16:56 +00:00
dak664
0ba9846abd
Add macros by Roger Larsson to select between hardware or software SPI transactions.
...
Minor speed optimizations.
2010-11-30 19:47:40 +00:00
nifi
7110afdad5
added missing include
2010-11-27 15:27:20 +00:00
dak664
dc028b3f85
Get rssi correctly in either rx mode, clean up radio driver debugging
2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21
Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers
2010-11-25 09:22:56 +00:00
dak664
880233a451
RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing.
2010-11-24 18:46:57 +00:00
adamdunkels
4fac3037e0
Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash.
2010-11-15 21:52:54 +00:00
dak664
69ef9d57eb
sizeof(*) is sizeof first array element
2010-11-12 17:24:36 +00:00
dak664
9e94ba9803
Allow non-ipv6 build, e.g. Hello World
2010-11-12 17:15:00 +00:00
nifi
5de83c9085
Only include code for stack printouts when needed
2010-11-12 15:54:41 +00:00
maralvira
3426eae031
fix typos
2010-11-11 20:37:33 +00:00
maralvira
9b2a2bb5e6
fix up stdint include
2010-11-10 22:12:29 +00:00
maralvira
6da84819dd
use stdint.h instead of custom types.h
...
stdint.h is more portable across compilers
2010-11-10 22:06:28 +00:00
maralvira
e229022f38
include crm.h
2010-11-10 21:58:12 +00:00
salvopitru
28e1445a0f
Added a simple implementation of Coffee for STM32W108.
2010-11-10 11:20:44 +00:00
maralvira
dfbc81158b
Allow CROSS to be overridden with CROSS or CROSS_COMPILE
2010-11-09 13:13:45 +00:00
maralvira
1aac14f252
add tutorial explaining how to set up an RPL network of econotags
2010-11-09 01:30:01 +00:00
maralvira
3b515587c5
change how prepare and transmit work --- Contiki expects to call
...
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
2010-11-07 20:07:42 +00:00
maralvira
e029fa8da0
fix defines for raw mode
2010-11-07 18:34:52 +00:00
maralvira
4664151419
fix build errors with start.S
2010-11-07 15:19:45 +00:00
maralvira
29333232d5
add section .start and undef _start so that _start is placed by the
...
linker correctly
2010-11-07 14:57:53 +00:00
maralvira
b8ebce0fef
add a memory section for RAM so that the linker will warn when you've
...
made your program too big.
2010-11-07 14:54:05 +00:00
maralvira
8385536c41
fix how start object is linked
2010-11-07 14:52:23 +00:00
maralvira
f38598ce9f
clear BSS
2010-11-07 14:49:42 +00:00
maralvira
57513948c9
Move stack near BSS so it doesn't take up space in the .bin
2010-11-07 14:48:52 +00:00
maralvira
77cf0f0f5e
update ring_osc_on and _off to the new bit structs
2010-11-07 14:42:31 +00:00
maralvira
c8056cc4e2
define TCF TCF1 and TCF2 --- the new bit structs don't work here for
...
some reason.
2010-11-07 14:42:02 +00:00
maralvira
dab7faf13c
Add gpio_set and gpio_reset
...
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a
Name the GPIO structure so we can set multiple bits at once
2010-11-07 14:28:30 +00:00
maralvira
4217eb2ebc
Provide a function to change timer interrrupt handlers
...
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime. This lets us set handlers
without necessarily knowing the name at link-time. The old way of
having weakly-linked tmr0_isr functions should still work.
2010-11-07 14:27:01 +00:00
maralvira
65d3942c76
Add the disable_int({}) macro
...
This is similar to safe_irq_enable and disable
2010-11-07 14:26:24 +00:00
maralvira
83e6995af1
Add TMR_ADDR helper
2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b
Add some useful timer macros
2010-11-07 14:24:36 +00:00
maralvira
5e00219a9c
Register definitions: get rid of some macro magic that doesn't help much
...
Instead of e.g. GPIO.DATA.GPIO_08, you now use GPIO->DATA.GPIO_08.
2010-11-07 14:24:11 +00:00
maralvira
091e4cd84e
Add structure-based ITC access
2010-11-07 14:23:15 +00:00
maralvira
11ac20a361
REF_OSC is a 32-bit number, not 64-bit number
2010-11-07 14:22:51 +00:00
maralvira
745e7b5ac2
Add cal_isr() support
2010-11-07 14:21:59 +00:00
maralvira
ab84453401
Add structure-based CRM definitions
2010-11-07 14:21:33 +00:00
maralvira
9d072d5309
Add macro to help compute TMR.ENBL values (useful when using #defined
...
values to represent timers)
2010-11-07 14:21:06 +00:00
