Commit graph

9901 commits

Author SHA1 Message Date
Enrico Joerns 0a63922fa2 Buttons: Move implementation of button routines to Button class
The implementation of clickButton(), pressButton(), and releaseButton()
can be shared accross the several node-dependent implementations as
they use the node-dependent doPressButton() doReleaseButton() routines.
2014-11-04 01:48:12 +01:00
Enrico Joerns be88a4fc52 Button: Add doPressButton() and doReleaseButton() to Button class
As every Button has a node-specific implementation part, this should be
the minimal interface to the backend node emulator for pressing and
releasing a button.
2014-11-04 01:48:11 +01:00
Enrico Joerns 378ca2629d Button: None of the buttons will saves its state
Saving a buttons state in simulation file is not required as its state
is much too volatile.
2014-11-04 01:48:11 +01:00
Enrico Joerns 82d30ef2e3 SkyButton: Reduce dependency on SkyMote
Placed call to setButton() in implementation-specific functions
doPressButton() and doReleaseButton() as in ContikiButton.
2014-11-04 01:48:11 +01:00
Enrico Joerns d99708ba08 Button: Move common interface visualization to Button class
The implementation of a simple JPanel with a JButton was only code
duplication accross the several button implementations.
2014-11-04 01:48:11 +01:00
Enrico Joerns 0d12bcffcb [cooja-platform] Fixes for slip-bridge compatibility
* Added dev/uart1.h header file to cooja platform
* Added slip arch stub
* Suppress examples putchar definition as cooja platform provides its own

Note that the uart1.h file should only be an intermediate solution.
A generic contiki-wide definition for uart handling is required as each
platform defines its own varying set of uart functions.
2014-11-04 00:14:06 +01:00
Enrico Joerns 5a4c2e0d1f [cooja-platform] Add cast to linkaddr_t to avoid warning 2014-11-04 00:09:45 +01:00
Enrico Joerns f8445ba1bd [cooja-platform] Remove unused variable 'shortaddr'
This variable was set but never used in the code
2014-11-04 00:09:45 +01:00
Enrico Joerns 2bc1e08f19 [cooja-platform] Include eeprom.h to avoid implicit declaration warning 2014-11-04 00:09:45 +01:00
Fredrik Österlind a50bc08adc Merge pull request #841 from gebart/build-git-tag-io-reduce
Makefile.include: Reduce I/O load (and build time) by assigning git description variable once.
2014-11-03 09:26:18 +01:00
Joakim Gebart b3dd696ec3 Makefile.include: Assign git description variable once.
By changing RELSTR= into RELSTR:= we force Make to evaluate the Git
version string only during Makefile read, and not on every single build
command execution.

The reduction in file system I/O cut the time to build
examples/er-rest-example on my development machine by a significant
amount, see below.

Core i7 notebook with ext4 file system on an SSD (building for TARGET=mulle):
"RELSTR="  make  19.70s user 1.07s system 82% cpu 25.291 total
"RELSTR:=" make  11.81s user 1.27s system 79% cpu 16.499 total

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-10-29 15:17:07 +01:00
Nicolas Tsiftes 6fb7dd238e Merge pull request #648 from cetic/pr-csma-fixes
High throughput fixes for csma and sixlowpan
2014-10-21 12:17:03 +02:00
Nicolas Tsiftes 10d444637e Merge pull request #825 from alignan/i2c_changes
Add function to change I2C baudrate and push relevant configuration valu...
2014-10-21 06:46:55 +02:00
Antonio Lignan ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes 0d39ee96ad Merge pull request #820 from alignan/serialnum_as_nodeid
Use the Z1 product ID as MAC/Node ID if no value is found in XMEM
2014-10-20 11:38:11 +02:00
Nicolas Tsiftes 27cde1ff81 Merge pull request #824 from alignan/fix_warnings
Warning fixes
2014-10-20 11:16:36 +02:00
Antonio Lignan cceb97059c Use the Z1 product ID as MAC/Node ID if no value is found in the XMEM 2014-10-20 10:36:49 +02:00
Antonio Lignan c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
kkrentz 0579e304e4 llsec: Renamed ccm to ccm_star & Renamed llsec regression test 2014-10-16 09:21:56 -07:00
Fredrik Österlind 7c55290c32 Merge pull request #810 from cmorty/pull/sky_energest
sky: Initialize energest as early as possible / make regression testing more tolerant
2014-10-16 15:11:23 +02:00
Nicolas Tsiftes fd47acba09 Merge pull request #808 from adamdunkels/pr/ip64
Conversion functions for IPv4/IPv6 addresses (missing from the NAT64 pr)
2014-10-10 00:42:37 +02:00
Moritz 'Morty' Strübe 9236b68779 Only fail on real fails 2014-10-09 09:43:08 +02:00
Moritz 'Morty' Strübe 74b741bad2 Support running multiple random seeds in case one fails 2014-10-09 09:43:07 +02:00
Moritz 'Morty' Strübe c0783e2841 sky: Initialize energest as early as possible
If energest is initialized too late, the radio is not accounted
until the first switch. This is a problem when the radio is always
listening.
2014-10-09 09:42:56 +02:00
Adam Dunkels 5a24a781d5 The ip64-addr module converts between IPv4 and IPv6 addresses. 2014-10-09 08:07:34 +02:00
Mariano Alvira e803a654b4 Merge pull request #684 from SmallLars/2nd-button
Enabled 2nd button on platform econotag
2014-10-08 14:05:24 -05:00
Nicolas Tsiftes 0a88764185 Merge pull request #804 from adamdunkels/pr/ip64
NAT64 for Contiki (RFC6164, RFC6147)
2014-10-08 19:41:09 +02:00
Adam Dunkels d891d11324 Merge pull request #557 from kkrentz/llsec-integration
Integration of Link Layer Security
2014-10-08 15:45:46 +02:00
Nicolas Tsiftes 9423f70cdf Merge pull request #802 from alignan/add_batery_capability
Added battery capability to Z1 platform
2014-10-08 14:56:28 +02:00
Fredrik Österlind f0f7f07c8d Merge pull request #799 from ejoerns/pull-req/cooja-mspsim-radiofix
[Cooja/MSPSim] Msp802154Radio: Fix maximum power indicator
2014-10-08 12:15:32 +02:00
Antonio Lignan 5bbb0cabbc Added battery capability to Z1 platform 2014-10-08 11:53:09 +02:00
Nicolas Tsiftes 4cc1762851 Merge pull request #797 from gebart/rpl-border-router-warnings
examples/rpl-border-router: Fix two minor warnings.
2014-10-05 17:15:15 +02:00
Enrico Joerns 9d27b181c1 [cooja/mspsim] Msp802154Radio: Fix maximum power indicator
Previously getOutputPowerIndicatorMax() returned the fixed value 31.
This is valid for e.g. the mspsim CC2420 radio implementation but not for the CC2520 implementation where the maximum returned value is 9.

Thus to fix transmission range issues (for example for Wismote node) the maxium value provided by the radio implementaiton must be used.
2014-10-05 00:38:49 +02:00
Joakim Gebart d4179a0a0c examples/rpl-border-router: Fix two minor warnings.
- Remove unused variable i in generate_routes.
 - Add cast to unsigned long for printf(..%lu..) in generate_routes.

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-10-04 18:05:38 +02:00
Adam Dunkels fd5e79d0db Merge pull request #796 from gebart/core-net-ip-buffer-overflow-fix
core/net/ip: Prevent (tiny) buffer overflow in resolv_found()
2014-10-02 13:52:05 +02:00
Joakim Gebart 24d15ad9a5 core/net/ip: Prevent (tiny) buffer overflow in resolv_found()
An off-by-one error in resolv_found() could make an strncat() call
overflow by the terminating null byte.

When building with Clang the following warning was shown:

../../../core/net/ip/resolv.c:1458:17: warning: the value of the
      size argument in 'strncat' is too large, might lead to a
      buffer overflow [-Wstrncat-size]
                sizeof(resolv_hostname) - strlen(resolv_hostname));
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../../../core/net/ip/resolv.c:1458:17: note: change the argument to
      be the free space in the destination buffer minus the
      terminating null byte
                sizeof(resolv_hostname) - strlen(resolv_hostname));
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                sizeof(resolv_hostname) - strlen(resolv_hostname) - 1

Signed-off-by: Joakim Gebart <joakim.gebart@eistec.se>
2014-10-02 12:52:39 +02:00
Fredrik Österlind 718e488b78 Merge pull request #795 from ejoerns/pull-req/cooja-println-cleanup
[Cooja] Println cleanup
2014-10-02 09:25:36 +02:00
Enrico Joerns 903d0333d3 [cooja] Removed some further printlns 2014-10-02 02:11:41 +02:00
Enrico Joerns f02266d67c [cooja] dialogs/MessageListe: User Logger instead of println 2014-10-02 02:05:39 +02:00
Enrico Joerns 927d9a3153 [cooja] dialogs/MessageList: Added @Override annotations 2014-10-02 02:05:14 +02:00
Enrico Joerns 40f54a8e26 [cooja] Radio802154: Removed obsolete comments including println hints 2014-10-02 01:53:26 +02:00
Enrico Joerns c7abba860f [cooja] Radio802154: Added @Override annotations
Also removed some unused imports
2014-10-02 01:40:07 +02:00
Enrico Joerns c5e034fa1a [cooja] IEEE802154Analyzer: Use logger
Replaced println and printStackTrace by logger
2014-10-02 01:37:24 +02:00
Enrico Joerns 373b00fc47 [cooja] PcapExporter: Use logger
Removed unnused imports, replaced println and printStackTrace by logger
2014-10-02 01:25:49 +02:00
Enrico Joerns 95b54f415e [cooja] MemoryLayout: Remove annoying println 2014-10-02 01:14:07 +02:00
Nicolas Tsiftes 77a265cf0f Merge pull request #793 from alignan/add_radio_def
Added missing radio capability define to Z1 platform config
2014-09-24 13:59:30 +02:00
Fredrik Österlind 8df1c98a85 Merge pull request #781 from ejoerns/pull-req/cooja-serialsocket
[Cooja] Configurable serial socket plugin
2014-09-24 12:49:15 +02:00
Fredrik Österlind 91610b9e1f Merge pull request #780 from ejoerns/pull-req/cooja-varwatcher
[Cooja] VariableWatcher 2.0
2014-09-24 12:37:32 +02:00
Antonio Lignan 343a3d3f7b Added missing radio capability define to Z1 platform config 2014-09-24 11:42:55 +02:00
Adam Dunkels 49cb87025e README file for the IP64 module 2014-09-14 21:26:33 +02:00