Commit graph

1104 commits

Author SHA1 Message Date
c_oflynn 9f6a069f96 New USB IPv6 address translation, works better with bridges. Enabled by a #define at start of sicslow_ethernet.c 2010-01-24 14:14:13 +00:00
adamdunkels 11362d0489 Remove the default list of sensors from the main() file to save space - those apps that need them can use them directly in any case 2010-01-21 11:17:08 +00:00
nifi c9a48aa752 Updated to match the new sensors API 2010-01-15 21:37:15 +00:00
nifi a7f8761978 Updated to match the new sensors API 2010-01-15 10:34:36 +00:00
adamdunkels 2f19892f74 Updated with the new sensors API 2010-01-15 08:50:39 +00:00
nifi 467df8ad4c reverted accidental commit 2010-01-14 22:26:38 +00:00
nvt-se d2655eac7a make watchdog management slightly more abstract to simplify porting 2010-01-14 21:16:58 +00:00
adamdunkels 46753473fa Added constants for light sensor values 2010-01-14 20:23:02 +00:00
adamdunkels 9ae29c3be5 Added light, sht11, battery sensors; restored light and battery activation since rtimers don't work without them (at present) 2010-01-14 20:18:23 +00:00
adamdunkels bb63085f60 Added SHT11 sensor API for Tmote Sky 2010-01-14 20:16:52 +00:00
adamdunkels 4f6f6c972d Use new sensors API 2010-01-14 20:15:55 +00:00
nifi 00e8164e58 updated vibration sensor name to Contiki standard 2010-01-14 20:02:55 +00:00
nifi dbe56e4666 Updated to match the new sensors API 2010-01-14 20:01:18 +00:00
nifi 4ffa7b95b7 Updated to match the new sensors API 2010-01-14 19:19:50 +00:00
nifi 7154b4c68d Removed references to irq, which is not used with the new sensor APIs 2010-01-14 19:14:47 +00:00
nifi 2a7ad011c5 Updated to match the new sensors API 2010-01-14 19:12:31 +00:00
nifi e1c6c4993a Removed references to irq, which is not used with the new sensor APIs 2010-01-14 18:13:33 +00:00
nifi 24f28f0f1c Updated to match the new sensors API 2010-01-14 17:39:35 +00:00
joxe 071a9eaa6b adapted for new sensor APIs 2010-01-14 16:13:45 +00:00
nifi e0c0808767 removed obsolete file 2010-01-14 15:55:15 +00:00
joxe 3c0dcb45c7 fixed for updated sensors API 2010-01-14 15:50:13 +00:00
adamdunkels fe126bc90e Updated to match the new sensors API 2010-01-14 15:38:56 +00:00
nifi 4d03a30456 removed obsolete file (available in core/dev) 2010-01-14 14:00:45 +00:00
joxe 31ea888b75 fixed Sky platform for new sensor APIs 2010-01-14 14:00:38 +00:00
joxe 4a3953204f changed sky sensors to new api 2010-01-14 13:53:06 +00:00
matsutsuka 23d5f84a46 Workaround for compiling some examples available 2009-12-16 06:47:17 +00:00
matsutsuka a628b0c581 minor aesthetic modification 2009-12-11 15:00:38 +00:00
matsutsuka 1586b3b5c4 fixed minor bug of mt-test due to sdcc 2009-12-11 14:59:45 +00:00
matsutsuka ebe74fed56 size-optimization option and peep-hole optimizer have been introduced.
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels e3fed27f4a Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files 2009-12-05 19:42:56 +00:00
nifi 3c1a7f3bc7 * Added configuration for radio receive buffer size (default Rime packet size)
* Added configuration for beep on bad crc
* Changed to drop packet if read buffer is too small rather than truncating data
* Turn off energest-listen during transmission
2009-11-19 18:04:02 +00:00
nifi c89028a11f reduced serial line buffer size 2009-11-18 15:34:57 +00:00
nifi bb0ffe0478 moved rime initialization into rime router so it is easier to switch IPv6 routing module 2009-11-18 13:51:55 +00:00
nvt-se 7a9e9c72a1 switched to new radio return values 2009-11-13 12:38:14 +00:00
nvt-se b909a62265 Reduced application buffer size for SD and switched parameter in cfs-coffee-arch.c 2009-11-11 14:59:33 +00:00
nvt-se 8c040be133 Changed the name of the declaration of the default block size. Reduced the OCR reading timeout. 2009-11-07 01:05:23 +00:00
nvt-se 7aac2d90fb specify that energest.h is in the sys directory. 2009-11-06 17:18:47 +00:00
nvt-se 31850d2e29 wait for RX before reading, and ensure that the byte is read out by using a volatile dummy variable 2009-11-06 15:40:15 +00:00
nvt-se 731e1da844 increase the I/O rate and use etimer_restart to maintain a uniform wait time between iterations 2009-11-06 15:11:52 +00:00
nvt-se f59e89cfb9 Fixed the problem of reads from the SPI where the first byte was sometimes lost.The SPI read function now only generates an idle symbol if there is not a byte
already in the reception buffer.
2009-11-06 14:02:59 +00:00
nvt-se 84f2a077de the return value should be checked against the size of sd_buf instead of buf 2009-11-03 16:18:37 +00:00
nvt-se 9b4cd05e1f Patch from David Gustafsson: break out SPI functions and fix bug in capacity
calculation.

Removed expensive modulo operations from sd_read and sd_write because the block size is now a variable. (nvt)
2009-11-03 15:21:43 +00:00
adamdunkels d3131e1811 Print link-local IPv6 address when booting the node 2009-10-29 22:10:59 +00:00
adamdunkels f03caa357e Allow reprogramming invidual nodes with 'make file.upload MOTE=x' where x is the mote number just like with make login 2009-10-29 22:10:21 +00:00
nifi 831f16cf61 Fixed COOJA quickstart to run COOJA from current directory 2009-10-28 13:39:15 +00:00
fros4943 99a540fd0d macro renamed to SPI_IS_ENABLED() to avoid confusions 2009-10-27 15:33:24 +00:00
fros4943 6b36cd9de9 added macro for checking whether SPI is ENABLED 2009-10-27 15:25:02 +00:00
nvt-se 4a0973a95f specify the number of queuebufs that we want to use in the MSB430 platform by default 2009-10-26 16:11:24 +00:00
kasunch ca6c8818b1 Two comment fixes 2009-10-22 15:48:20 +00:00
nifi 178548413e added option to specify JTAG port for programming 2009-10-22 09:27:46 +00:00