deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
8643 commits 6 branches 13 tags 80 MiB
Commit graph

8643 commits

This branch
This branch
All branches
Author SHA1 Message Date
Niclas Finne e25226f01e Use the directory of the source file as initial directory when opening file browser 2012-10-19 14:07:22 +02:00
Mariano Alvira 6ff896d5b2 add zero len mode for mac addr 2012-10-12 10:48:53 -04:00
Mariano Alvira 74193d952b add flexibity layout to bbmc 2012-10-12 10:47:48 -04:00
Mariano Alvira d1a0ab0973 Add C version of mc1322x-load courtesy of Maxim Osipov 2012-10-11 23:14:14 -04:00
josh gordonson 3cea9b567f made macros for each gpio pin 2012-10-05 12:42:04 -04:00
simonduq 74baca91b1 Added sanity check to avoid deleting DS6 neighbor table entry for a default route 2012-10-05 17:55:45 +02:00
simonduq dbd4f1c579 Force call of subscriber_callback when the ETX of a link is estimated for the first time. Otherwise, it was not called in case of NO_ACK. 2012-10-05 17:24:23 +02:00
Joakim Eriksson 621790f156 fixed read loop to be slightly less CPU speed dependent 2012-10-01 13:14:47 +02:00
George Oikonomou d84a97103f cc2x3x stack debugging macro fix 2012-09-20 15:12:02 +01:00
George Oikonomou fde1510653 Added definitions for cc2530 DMA-related SFR bits 2012-09-20 15:09:15 +01:00
George Oikonomou 3b0e92168b Copied cc2530 stack functions to the cc2430 port 2012-09-20 15:09:15 +01:00
George Oikonomou b292e02012 Sensinode putdec() debugging 2012-09-20 15:09:15 +01:00
George Oikonomou 95b9d4ee29 Sensinode/cc2430 stack depth optimisation 
This replicates the method used by the cc2530 port
 2012-09-20 15:09:15 +01:00
George Oikonomou 067fabe0f9 Sensinode main variable optimsations: 
r is now uint8_t, allocated to registers
len is uint16_t for more efficent arithmetic

(Changes replicated from the 253x port, originally
contributed by Philippe Retornaz - EPFL)
 2012-09-20 15:09:15 +01:00
George Oikonomou cb168da729 Changed the cc2430 sleep_flag to uint8_t 2012-09-20 15:09:15 +01:00
George Oikonomou fa5a38666b Removed redundant #else blocks 2012-09-20 15:09:15 +01:00
George Oikonomou 88c6689e38 cc2430: Build with --fomit-frame-pointer 2012-09-20 15:09:15 +01:00
Niclas Finne 767e8bb551 Default value for _DATA20_HEAP_SIZE when using the IAR compiler on MSP430 platforms 2012-09-20 14:01:56 +02:00
Niclas Finne 4630945475 Made the stack and heap size configurable when using the IAR compiler on the MSP430 platforms 2012-09-19 22:49:19 +02:00
Niclas Finne 919ddfbf09 Added delay at startup to let things stabilize before writing to the uart 2012-09-19 22:47:48 +02:00
Niclas Finne 8053e2c353 Workaround for an odd type inference problem associated with the IAR compiler. Patch by Vilhelm Jutvik. 2012-09-12 14:46:19 +02:00
George Oikonomou ee7af77ca9 Reworked the cc2530 stack debugging facilities: 
- Moved to their own file
  (so we can later copy the entire thing over to cc2430)
- Renamed the functions
  (for naming convention reasons)
- The entire thing can be enabled/disabled
- Added a couple more macros
- Hooked into main()
 2012-09-07 17:40:17 +01:00
Philippe Rétornaz 9a63e8c027 cc253x: Add stack monitoring helpers 2012-09-07 17:32:54 +01:00
Philippe Rétornaz 780e62d7e8 cc253x: add putdec debug function 2012-09-07 17:32:54 +01:00
Philippe Rétornaz 48d99f15c8 cc253x: fix dma interrupt enable flag 2012-09-07 17:32:54 +01:00
George Oikonomou c6ec22c4c8 cc2530: Added a method to maximise stack depth 
This was oringinally contributed/reported/discussed/patched by
Philippe Retornaz (EPFL) but it's implemented
in a more configurable fashion here.
 2012-09-07 17:32:53 +01:00
Philippe Rétornaz a0d2988846 cc253x: Don't force __data usage 
SDCC optimize "r" and put it in a register.
Don't force len to be in __data.
 2012-09-07 17:32:10 +01:00
Philippe Rétornaz 666ff6ca55 cc253x: use a uint8_t for sleep_flag 
__bit variables must be located after the 0x20 address
This force the stack to start after 0x20, thus decrease
the stack size by a considerable amount.
 2012-09-07 17:32:10 +01:00
Philippe Rétornaz 44bcabe89c cc253x: Change CFLAGS 
This add -fomit-frame-pointer by default, it decrease sliglty the
stack usage when several function call are nested.
On some specific case 30 bytes could be saved on the stack.
 2012-09-07 17:32:10 +01:00
George Oikonomou 8699f7741d Fixed typos and a stray printf. Adjusted comments 2012-09-07 17:31:25 +01:00
Ivan Delamer b43dad00b0 Cleaned up RF230BB, and refactored FRAME_RETRIES and CSMA_RETRIES 
#defines.
 2012-09-04 11:12:18 -06:00
Ivan Delamer 2e72ec3594 Place ATmega1281 define in correct section (it does have compare C 
unit, avoid duplicate define and compiler warning).
 2012-09-01 15:22:13 -06:00
Ivan Delamer 5636357243 Fix RF230 transition: RX_AACK_ON -> TX_ARET_ON (go through PLL_ON, 
as per datasheet). Tested on RF230 and 128RFA1 (RF231).
 2012-09-01 15:20:00 -06:00
simonduq 1bb055bae6 Fixed the udp-stream example: use the new RPL interface, reduce RAM usage 2012-08-30 13:22:27 +02:00
Niclas Finne c425e51911 Added support for nested quotes in arguments when calling external commands from Cooja 2012-08-22 14:14:55 +02:00
simonduq 24dba740e2 Added support for quote-delimited arguments when calling external commands from Cooja 2012-08-22 13:32:20 +02:00
Antonio Lignan c5e9d688a5 Fixed sht11 driver, now ensures the i2c bus is disabled when initializing 2012-08-16 14:12:27 +02:00
Antonio Lignan 73e7f25cbc Simple phidget-like relay driver for the Z1 mote with basic functionalities 2012-07-30 11:27:13 +02:00
Adam Dunkels a3e56371a5 Bumped version number 2012-07-12 11:33:12 +02:00
Adam Dunkels 08d854f782 Updated README with new website and shorter text 2012-07-12 11:30:21 +02:00
Adam Dunkels dd148e1d12 Bumped version number 2012-07-12 11:30:05 +02:00
George Oikonomou 26a87ee9cb Improved handling of cc2x3x rf_flags 2012-07-11 10:53:14 +01:00
George Oikonomou 43f2790357 Added channel_get() to the cc2x3x RF drivers 2012-07-11 10:53:14 +01:00
George Oikonomou d66241fd97 Bugfixed the cc2530 LOW_POWER_RX configuration 
Report and fix by Tom Xiao
 2012-07-11 10:53:14 +01:00
George Oikonomou 62fbd389d8 Renamed a cc253x SFRX to stop namespace conflicts 
The TR0 SFRX can not use the name TR0 because it
conflicts with TCON.TR0 on the default 8051.

See SDCC bug 3513300
 2012-07-11 10:53:14 +01:00
George Oikonomou 4b73b48f60 Fixed the cc2530 RSSI adjustment 2012-07-11 10:53:14 +01:00
Ivan Delamer 17a62a649c ATmega128RFA1 bug fix: no interrupt pin used (embedded radio). 
Enabling interrupt caused MCU reset if using pin as GPIO.
 2012-07-10 14:36:47 -06:00
Nicolas Tsiftes 86115a392e Include string.h 2012-06-27 15:44:53 +02:00
Nicolas Tsiftes 0ba83a10df Merge branch 'master' of ssh://contiki.git.sourceforge.net/gitroot/contiki/contiki 2012-06-27 15:42:51 +02:00
Mariano Alvira 6c5ab6f155 fix typo 2012-06-14 21:36:57 -04:00