dak664
0f59ba3187
Add rtimers, allow Jackdaw to use RF230BB driver
2010-02-16 21:48:38 +00:00
dak664
893a31f49b
Jackdaw additions
2010-02-16 21:41:24 +00:00
dak664
8603f0f0f6
Add RADIOSTATS
2010-02-12 18:00:30 +00:00
dak664
a6ab27402a
Add RADIOSTATS
2010-02-12 16:41:02 +00:00
dak664
eb2ac1a154
Make seconds a global variable, add optional radio on time
2010-02-12 14:37:50 +00:00
ksb
8e7ada96d3
Use .u prefix for uploading to device and PROG variable to select programmer
2010-02-10 10:08:36 +00:00
oliverschmidt
50be40768b
Removed closing of stdin, stdout (and stderr on the Apple2). It was introduced in order to maximize the number of available file handles for the webserver. However none of the target machine DOSes allows to open a single file several times diminishing the intended effect very much. One the other hand not being able to "just printf() something" causes trouble over and again - i.e. hello-world seemingly not working...after all a typical case of german over-enigneering ;-)
2010-02-10 07:43:25 +00:00
oliverschmidt
1ac4d7f501
Used CFS instead of POSIX.
2010-02-08 22:26:19 +00:00
oliverschmidt
5570972957
Added a Contiki app basically combining apps/netconf and apps/dhcp. It's a 6502 specific app as it doesn't configure the running uIP instance but instead writes to the 'contiki.cfg' configuration file used by 6502 apps to configure uIP.
2010-02-08 22:08:17 +00:00
adamdunkels
dea4826f94
Added watchdog.c to the USB stick code
2010-02-07 23:05:20 +00:00
adamdunkels
091483c150
Added dummy watchdog functions for all AVR platforms
2010-02-07 07:43:35 +00:00
ksb
387483ad24
Missing file
2010-02-05 16:41:23 +00:00
ksb
2c955d6e3f
Synchronizing with my work copy.
2010-02-05 16:23:40 +00:00
ksb
cd30fa2b50
Removing obsolete directory, moved to cpu/arm/at91sam7s/
2010-02-05 15:07:26 +00:00
oliverschmidt
2d40c75efe
Allow 6502 ctk programs (all running in non-window mode) to exit the Contiki process by calling LOAD_UNLOAD().
2010-02-04 23:52:30 +00:00
c_oflynn
95d0b09954
-Fix that can cause USB stick to freeze up
...
-Add EEM Support
2010-02-04 10:40:00 +00:00
oliverschmidt
4189884793
Don't activate UDP checksums on 6502 targets as the inline-assembler implementation in cpu/6502/net/uip_arch.c is broken!
2010-01-30 20:54:15 +00:00
oliverschmidt
26c9ec41f7
Activate uIP logging when "high level config" logging is enabled.
2010-01-30 20:48:31 +00:00
adamdunkels
4ff6b5460a
Removed safeguards around the update code for the timer; turns out they weren't needed (but instead triggered a bug in MSPsim)
2010-01-30 14:03:35 +00:00
anthony-a
76749a382d
move cc2430_process to home bank since it needs to be called from a function pointer.
...
disable led code to make room in home bank.
2010-01-29 19:15:44 +00:00
anthony-a
507460d29a
update code bank assignments
2010-01-29 19:13:00 +00:00
adamdunkels
dbacf3e781
Values altered in interrupt handlers should be volatile
2010-01-26 10:20:16 +00:00
anthony-a
dbdf9982a9
change bank assignments.
...
add missing header file.
add ihx converter
2010-01-26 02:37:51 +00:00
anthony-a
1427c79b7a
include new files in source file list.
2010-01-25 23:24:03 +00:00
anthony-a
6280cea706
remove bank macros which are now in banked.h
2010-01-25 23:13:04 +00:00
anthony-a
9cfe29612a
Modifications to support banked code. Interrupts and routines accessed through function pointers reside in independent files so they can be assigned to the HOME bank. Init code can be placed in any bank.
...
Also add adc init code and bank header files.
2010-01-25 23:12:09 +00:00
c_oflynn
15ffaeed86
Fix for error where USB host could send NAK, but isn't considered in jackdaw, resulting in jackdaw hanging
2010-01-24 13:01:58 +00:00
anthony-a
742c5a0782
add definition for PSBANK used in sdcc crtbank.asm
2010-01-21 15:37:18 +00:00
anthony-a
acc1fe923c
rules file for assigning code files to specific banks.
2010-01-21 15:34:26 +00:00
anthony-a
2f853dc930
Add support for bank switching and segment.rules file to assign code to banks.
2010-01-21 15:33:19 +00:00
adamdunkels
5a03e4e6ad
Bugfix: changed #ifdef to #if, otherwise the SFD code would be enabled anyway
2010-01-19 20:35:41 +00:00
adamdunkels
9d751da8e5
Disable SFD interrupt by default
2010-01-19 13:11:23 +00:00
adamdunkels
acea0afb35
Enable a flag when packet SFD seen
2010-01-19 13:11:01 +00:00
adamdunkels
2772d31ae6
Turn off Timer A before modifying its control registers to avoid problems when timer is updated frequently
2010-01-18 21:17:11 +00:00
nifi
a364213180
IRQ_PORTx is no longer used. Instead returning port number.
2010-01-14 20:05:58 +00:00
nifi
a937f8626c
removed files no longer used with new sensor APIs
2010-01-14 18:10:31 +00:00
zdshelby
c5ecde4ca0
Fixes and improvements from Anthony Asterisk
...
- First in 8051def.h, it appears the uip_arch-asm.S file was copied from z80 and am unsure it will work properly. I modified the 8051def.h to prevent the UIP code from using these routines.
- In dma.c the config routine provides access to all of the DMA channel options, except for the word mode flag. In order to maintain compatibility with any existing code I created a second routine and converted the original routine into a wrapper routine with a fixed word mode value.
- uart.c::uart0_init was missing blocking access to the higher baud rates. I am not sure why, so I corrected this.
- I also copied over to header files that provide some useful macros from the msp430 cpu. The files are lpm.h and hwconf.h. The lpm.h is for switching power modes, I think. The hwconf.h has various macros for configuring port I/O. By porting these files the led/button api's can be ported with minimal modifications.
2009-12-22 09:28:14 +00:00
matsutsuka
23d5f84a46
Workaround for compiling some examples available
2009-12-16 06:47:17 +00:00
matsutsuka
ebe74fed56
size-optimization option and peep-hole optimizer have been introduced.
...
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels
9ac4109bad
Increased the clock speed to 32768/4 from 32768/8 to provide better accuracy for power profiling of radio CCA checks
2009-12-09 12:55:35 +00:00
adamdunkels
f9260c4fae
Enable interrupts during the periodic clock processing to allow rtimers to execute on top of the clock
2009-12-08 23:40:14 +00:00
adamdunkels
a4df6e0fbf
Remove the read from TAIV - this should not be done for TIMERA0 interrupts (in fact, doing so messes up the other timer a interrupts, like the clock tick...)
2009-12-08 23:39:45 +00:00
adamdunkels
873f4d0222
Need to clear the interrupt flag register for Timer A
2009-12-07 14:32:16 +00:00
adamdunkels
e3fed27f4a
Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files
2009-12-05 19:42:56 +00:00
nifi
efdbbf9fe3
minor cleanup: random.c is already included in Makefile.include
2009-11-19 17:33:05 +00:00
nifi
4f2318152e
Added support for CPU speed 2.4576MHz and configuration to enable/disable interrupt driven TX
2009-11-18 15:45:32 +00:00
nifi
2640f9bf26
Must check error flag before reading. Removed leds debug.
2009-11-18 13:24:12 +00:00
adamdunkels
790f2f632a
Moved putchar into separate file to make it easier to override its implementation
2009-10-30 15:06:26 +00:00
fros4943
53d03aa924
uart correction values for 3.9Mhz (default sky freq.)
2009-10-27 16:25:28 +00:00
oliverschmidt
fda46f6800
- cc65 2.13. allows to define all necessary paths through the single env var CC65_HOME.
...
- cc65 2.13. allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
- cc65 2.13. integrates the startup code with the library. In 2.12. the startup code pulled in main(). Now main() is supposed to pull in the startup code. But if main() resides itself in a library (as with Contiki) then nothing is pulled in at all :-(. The workaround is to pull in main() explicitly through the new option -u (working like the same GCC option).
2009-10-18 11:34:38 +00:00
