Commit graph

6132 commits

Author SHA1 Message Date
adamdunkels
09c223f549 Updated Contiki X-MAC to use hardware acks, which allows for tighter timing and results in a lower duty cycle. Hardware acks also make X-MAC more robust against packet losses, as there is a direct way for the CSMA layer to detect loss of data packets. Before, Contiki X-MAC only detected loss of strobes. 2011-01-25 14:31:09 +00:00
adamdunkels
d51e99a3dd Updated streaming mode to use only about 20% radio. Made guard time more conservative due to problem report by Ricklef Wohlers. 2011-01-25 14:29:46 +00:00
adamdunkels
fa524fabd7 Bugfix: q->buf was not tested for NULL, as it should be. Fix by Simon Duquennoy. 2011-01-25 14:24:38 +00:00
joxe
e79c0ab1ee fixed rpl so that it sends and receives on the rpl-all-nodes multicast address 2011-01-25 09:55:12 +00:00
joxe
3a643fa0c6 added address macros for rpl-all-nodes 2011-01-25 09:54:03 +00:00
enricmcalvo
af6d2f3e72 Added tmp102-related makefiles directives for proper compilation. 2011-01-23 18:54:18 +00:00
oliverschmidt
8c87f85a1d Made cc65 build compatible with make.exe from GnuWin32 and cmd.exe. We just live without the phony targets when building with cmd.exe - the next cc65 release will make the whole sed thingy obsolete anyway :-) 2011-01-23 16:30:30 +00:00
oliverschmidt
10a7bb2579 Made Atari build compabile with make.exe from GnuWin32 and cmd.exe. cmd.exe comes with a builtin mkdir which doesn't understand -p. However -p isn't necessary as long as the disk creation works - and therefore the directory is successfully deleted. 2011-01-23 16:25:45 +00:00
oliverschmidt
f3cf57e41b Somewhat surprisingly this is the only change necessary to make the Contiki build system in general compatible with make.exe from GnuWin32 and cmd.exe. 2011-01-23 16:22:48 +00:00
nvt-se
375e1d76ef Print the error if select fails 2011-01-21 14:19:57 +00:00
adamdunkels
6fcef66675 Bugfixed version of MSPsim: the previous version would cause timer drift when a TxCCR register was written to 2011-01-21 07:46:57 +00:00
enricmcalvo
47613e57ad Added test program in the z1 examples directory for the tmp102 temperature sensor. 2011-01-20 10:28:48 +00:00
enricmcalvo
594d033c04 Added device drivers for tmp102 sensor for the Zolertia Z1 platform. 2011-01-20 10:28:00 +00:00
joxe
801a7e1149 fixed bug with uart DMA 2011-01-19 20:44:20 +00:00
salvopitru
6864494646 Added some parameter checks. 2011-01-19 09:22:23 +00:00
salvopitru
5fcae86be3 Now it is putchar that has to be redefined (instead of __io_putchar), like other platforms. 2011-01-19 09:13:06 +00:00
adamdunkels
8f283b3989 Bugfix 2011-01-19 07:30:31 +00:00
adamdunkels
6f076dbe1a A set of compiler options that reduce the size of the final code size and RAM usage with ~10%. Courtesy of Simon Duquennoy. 2011-01-19 07:24:37 +00:00
nvt-se
50aee97fc2 More comments + minor adjustments to the header file 2011-01-19 05:09:57 +00:00
nvt-se
d34de25f29 A facility for testing units of Contiki software. 2011-01-18 19:10:06 +00:00
maralvira
68180c0574 use network 230 --- 802.15.4 no-FCS 2011-01-18 16:58:18 +00:00
adamdunkels
bb2e3b25bd Larger default DMA tx buffer size, to allow SLIP operation. Warn if DMA is enabled, since MSPsim does not yet support it. 2011-01-18 16:07:16 +00:00
adamdunkels
4b4b8fad56 More recent packet entries. Allow 4 queue entries to be dedicated to generated packets. 2011-01-18 16:05:53 +00:00
adamdunkels
808c21fbfa Bugfix: default should be 3 MAC-level retransmissions if collissions or loss occurs 2011-01-18 16:03:57 +00:00
adamdunkels
affba785b5 Enabled phase-lock only for channel check rates of 32 Hz or lower 2011-01-18 16:03:19 +00:00
nifi
3d28da8813 Coffee no longer uses watchdog calls 2011-01-18 15:49:37 +00:00
nifi
1e69c4c795 Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up 2011-01-18 15:48:38 +00:00
nvt-se
9ad02dbdd8 Removed header inclusion 2011-01-18 14:58:39 +00:00
nvt-se
28421f1fe2 Removed watchdog calls from Coffee 2011-01-18 14:06:33 +00:00
nvt-se
00ac8cfaa0 Moved watchdog_periodic into the lowest level to avoid multiple redundant calls higher up 2011-01-18 14:03:55 +00:00
joxe
db0423af20 added response to Mac addr request and added addrs in printout 2011-01-17 20:05:51 +00:00
maralvira
ce92a90e58 new timer setup routines. 2011-01-17 15:51:19 +00:00
maralvira
b3c8c14b7d add timer setup routines 2011-01-17 15:51:02 +00:00
maralvira
ca098db611 fix a race condition regarding advancement of the softclock. Without
this, the advancment would fail to trigger a tx cycle
occasionally. This would cause the packet to get deferred until the
next expiration of the softclock.
2011-01-17 15:49:17 +00:00
maralvira
40bb4b80dc whitespace fixup to sync with libmc1322x 2011-01-17 15:48:39 +00:00
maralvira
6fb75263f9 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:23 +00:00
maralvira
d82b004154 fix parsing and pcap generation for packets with multiple output lines
(those that are > 16 bytes).
2011-01-17 15:47:08 +00:00
maralvira
d0227afbed cycle channel on keypress. 2011-01-17 15:46:27 +00:00
maralvira
c78e1e345e add stdint.h 2011-01-17 15:45:02 +00:00
maralvira
0445a4f78f add cmdline options to set the intercharacter delays. 2011-01-17 15:44:18 +00:00
maralvira
fb8c08ca7c only use these stubs with linux toolchains 2011-01-17 15:42:24 +00:00
salvopitru
dcff411f9d New example for mb851 board that comes from sky-websense. 2011-01-17 10:58:04 +00:00
salvopitru
9aa734936f RANDOM_MAX changed to RANDOM_RAND_MAX. 2011-01-17 10:08:14 +00:00
salvopitru
fb75503624 'BTM' can be defined to flash devices already in bootloader mode.
COFFEE_FILES changed to COFFEE.
2011-01-17 09:41:47 +00:00
salvopitru
a9b1b37bec Added definition of BAUD2UBR macro. 2011-01-17 09:22:24 +00:00
salvopitru
8e0bcaee50 Added new options that make wpcapslip6 work also with the rpl-border-router. 2011-01-17 09:16:55 +00:00
joxe
d7712b27d0 added undef of putchar for platforms where it is a macro 2011-01-14 17:57:48 +00:00
adamdunkels
26e3b6fdc0 Bugfix by Simon Duquennoy: don't transmit packet until previous packet has been sent by the RDC layer. 2011-01-13 19:06:22 +00:00
adamdunkels
6f89233b01 Print out the speedup when simulation stops 2011-01-13 19:05:09 +00:00
nifi
569895af1c Removed void * operations 2011-01-12 22:58:33 +00:00