Commit graph

1627 commits

Author SHA1 Message Date
Antonio Lignan 8cc1870663 Zoul: generic servo driver 2016-08-24 14:27:41 +02:00
Antonio Lignan cb42bafbfb Merge pull request #1756 from g-oikonomou/contrib/cc26xx/new-ccxxwares
Update to latest TI CC13xxware/CC26xxware
2016-08-16 15:44:41 +02:00
Antonio Lignan 7ddbe640be Merge pull request #1795 from g-oikonomou/contrib/sensniff
Add generic sensniff example and remove legacy sniffers
2016-08-16 14:47:17 +02:00
Antonio Lignan 3550d43b47 Merge pull request #1794 from g-oikonomou/bugfix/cc13xx/prop-set-channel
Fix PROP mode channel switching
2016-08-16 12:57:43 +02:00
Benoît Thébaudeau a52a3d94d3 cc2538: uart: Fix garbled output occurring upon lpm_enter()
lpm_enter() must not enter PM1+ if the UART is transmitting. Otherwise,
the UART clock gets disabled, and its TX is broken.

The commit b8b54a033c had already
partially fixed this issue, but it could still occur while transmitting
stop bits because, contrary to UART_FR.BUSY, UART_FR.TXFE takes only the
data bits into account, not the stop bits.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-15 03:07:52 +02:00
Antonio Lignan 1cd39a2621 Merge pull request #1780 from g-oikonomou/bugfix/cc2538/sniffer
Don't flush the CC2538 RF RX FIFO unconditionally
2016-08-12 12:09:12 +02:00
George Oikonomou 983a618a36 Extend CC13xx PROP mode driver
We now write a dummy LQI in read() and we also add support for `RADIO_PARAM_RX_MODE` in `set_value()`
2016-08-12 01:23:50 +01:00
George Oikonomou 07f984eec2 Remove legacy sniffer references: Docs 2016-08-12 01:23:50 +01:00
George Oikonomou b0672713bb Remove built-in sniffer support: aducrf101 2016-08-12 01:23:49 +01:00
George Oikonomou a932dfa6df Remove built-in sniffer support: CC2538 2016-08-12 01:23:49 +01:00
George Oikonomou dbd4f630fd Remove built-in sniffer support: CC13xx PROP mode 2016-08-12 01:23:49 +01:00
George Oikonomou 0de1dc1025 Remove built-in sniffer support: CC2530 2016-08-12 01:23:49 +01:00
Benoît Thébaudeau ae5205f9e2 doxygen: Fix orphan modules
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-08-10 04:56:15 +02:00
Michael LeMay bde8eb35ae x86, galileo: Fix UART system call authorization initialization
This patch fixes UART system call authorization initialization (when
protection domain support is enabled) to only initialize the system call
entrypoint and authorization data structures once, prior to per-port
setup. Previously, if two UARTs were configured, the setup procedure for
the second UART would erase the system call authorization for the
first (console) UART, resulting in a crash upon the next attempt to
perform console output.
2016-08-04 16:09:44 -07:00
Michael LeMay 31ad67abd7 x86: Support configurable UART baud rate
This patch extends the Intel Quark X1000 SoC UART initialization API to
accept a numeric baud rate specification.
2016-08-03 07:58:51 -07:00
Simon Duquennoy cda89aaaf2 Merge pull request #1217 from tiagoshibata/c64_compilation_fixes
Fixes compilation targeting c64
2016-07-25 14:57:24 +02:00
George Oikonomou 8ab0522cec Fix PROP mode channel switching
If `NETSTACK_CONF_RADIO.set_value(RADIO_PARAM_CHANNEL, ...)` is called when radio is on, it will fail to apply the channel change, because it won't re-send `CMD_PROP_RADIO_DIV_SETUP` and `CMD_PROP_FS`. This commit fixes this condition, by making sure the correct commands are sent to the radio.
2016-07-24 03:39:13 +01:00
Sumankumar Panchal 3bb58b7c82 Minor data type correction. 2016-07-22 22:49:49 +05:30
George Oikonomou eec890d60e Update CC26xxware to v2.24.02.17202 2016-07-17 00:26:52 +01:00
George Oikonomou fd82603786 Update CC13xxware to v2.04.02.17240 2016-07-17 00:26:52 +01:00
George Oikonomou dc1f9fe010 Simplify MODESEL value determination 2016-07-17 00:26:52 +01:00
George Oikonomou 4495d14702 Make ROM bootloader configurable through contiki- or project-conf.h 2016-07-17 00:26:52 +01:00
George Oikonomou ccba6bdb20 Update cpu files to reflect API in latest CCxxware versions 2016-07-17 00:26:51 +01:00
George Oikonomou 0e4c02bf3b Update ChipInfo and OSC macros 2016-07-17 00:25:18 +01:00
George Oikonomou f68b77fdfa Remove ROM AUX timer macros
They have been undefined in CCxxwares
2016-07-17 00:25:17 +01:00
George Oikonomou 171fe8d08e Adjust GPIO macros to reflect API in latest CCxxware 2016-07-17 00:25:17 +01:00
George Oikonomou 788cb1e119 Move ROM function macros to separate file 2016-07-17 00:25:17 +01:00
George Oikonomou 568973f6ec Don't flush the CC2538 RF RX FIFO unconditionally
After reading a frame, `read()` checks the status of the RX FIFO:

* If an overflow is detected, the FIFO gets flushed
* If there are more frames in the FIFO, the `cc2538_rf_process` will get polled again in order to read out the next frame.

#1550 changed `read()`, which now performs the above check for non-poll mode, but it then flushes the FIFO unconditionally. Therefore, if there are two or more frames in the FIFO, they will get flushed before the `cc2538_rf_process` has had a chance to read them out. This results in missed frames.

Reproducing this is trivial: Build a CC2538 sniffer and see how it will never show you .15.4 ACK frames. ACK reception completes while `read()` is still streaming the previous captured frame to the host. Upon completion, the FIFO will get flushed and the ACK will get lost.

This pull proposes removing the unconditional flush and reverting to the original logic for non-TSCH operation.

Pinging @thomas-ha here for input regarding poll mode.

This pull sits on top of #1778
2016-07-17 00:24:47 +01:00
Benoît Thébaudeau c05665a16b Merge pull request #1778 from g-oikonomou/contrib/cc2538/rf-driver-code-style
Improve code style of the CC2538 RF driver
2016-07-17 01:22:21 +02:00
George Oikonomou dcad5e7e3f Merge pull request #1727 from g-oikonomou/contrib/cc26xx/trng
Add CC13xx/CC26xx TRNG Support
2016-07-16 23:34:53 +01:00
George Oikonomou 7fdb9849de Remove unnecessary parentheses 2016-07-16 22:35:23 +01:00
Atis Elsts 2fe4b4d5bb CC26xx: enable MCU sleeping while transmitting if and only if not in poll mode 2016-07-16 18:22:20 +01:00
George Oikonomou c359e98bf1 Change mac_timer_init() to static
We also move the function to a different location so we won't have to provide the prototype separately
2016-07-16 17:11:58 +01:00
George Oikonomou 6ef9509dfb Change get_sfd_timestamp() to static
We also move the function to a different location so we won't have to provide the prototype separately
2016-07-16 17:11:57 +01:00
George Oikonomou 833dc89f7c Fix code style 2016-07-16 17:11:57 +01:00
George Oikonomou 0313f9abf1 Merge pull request #1751 from atiselsts/bugfix/cc26xx_etimer_sleep
CC26xx: fix a regression in and refactor LPM code
2016-07-16 14:45:56 +01:00
Antonio Lignan 23a0449a97 Merge pull request #1753 from g-oikonomou/bugfix/cc26xx/missing-include
Add missing include
2016-06-30 22:53:45 +02:00
Atis Elsts b6617f17c5 CC26xx: always request HF crystal oscillator at radio on() 2016-06-29 16:41:33 +03:00
Atis Elsts 9caaf26012 CC26xx: fix a regression in and refactor LPM code 2016-06-29 01:03:06 +03:00
Benoît Thébaudeau 01a533fb75 Merge pull request #1704 from kkrentz/cc2538-aes-fixes
One fix to CC2538 hardware security
2016-06-25 01:30:16 +02:00
Antonio Lignan 6a2d802b9a Merge pull request #1737 from bthebaudeau/cc2538-fix-missing-result-av
cc2538: aes: Fix possibly missing result available status
2016-06-25 00:14:29 +02:00
kkrentz c28b6fb7ba CC2538: Reboot if the crypto engine fails (error handling is too hard) 2016-06-24 01:50:27 -07:00
Benoît Thébaudeau 1da00a482f cc2538: aes: Fix possibly missing result available status
Depending on the use case and on the timings,
aes_auth_crypt_check_status() sometimes never reported an available
result, leading to a deadlock of any protothread waiting for this event,
and to a WDT reset if a protothread was polling it.

This was caused by aes_auth_crypt_start() clearing the result available
interrupt after operations that may rightfully trigger it, leading to a
missed interrupt.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-23 22:25:27 +02:00
Benoît Thébaudeau 8a273a248e cc2538: Add configuration for firmware location
Introduce FLASH_CONF_FW_ADDR and FLASH_CONF_FW_SIZE in order to make it
possible to place the firmware anywhere, regardless of Coffee, and
without having to write a custom linker script. Also, handle the default
values properly in order to fix the link breakage reported by
Arthur Fabre <arthur@arthurfabre.com> with COFFEE_CONF_CUSTOM_PORT.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2016-06-19 23:12:02 +02:00
George Oikonomou de18c16c9f Add CC13xx/CC26xx RNG support to the build 2016-06-15 10:32:03 +01:00
George Oikonomou fd9d878e1d Implement random.h API for the CC13xx/CC26xx 2016-06-15 10:32:03 +01:00
George Oikonomou bb4056903c Add CC13xx/CC26xx TRNG driver 2016-06-15 10:32:03 +01:00
George Oikonomou f8864c67fd Add TRNG CCxxware macros 2016-06-15 10:30:17 +01:00
Atis Elsts e233c3f27f cc26xx: change CCA logic to be standard-compatible; change receiving_packet to return true iff sync (SFD) has been seen 2016-06-14 00:54:33 +03:00
Atis Elsts d85667d535 cc26xx: packet queue changes: allow to read packets after radio has been turned off; make pending_packet() return true when there is a packets being received 2016-06-14 00:54:33 +03:00