Commit graph

1367 commits

Author SHA1 Message Date
Ricardo de Almeida Gonzaga 61e06c632a galileo: Add GPIO input example
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate input pins.

The application uses default galileo pinmux initialization and sets the
GPIO 5 (IO2) as output pin and GPIO 6 (IO3) as input. It toggles the
output pin state at every half second and checks the value on input pin.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga 7dfd753b21 galileo: Add I2C master example
This patch adds an example application that shows how to use I2C driver
APIs to communicate with LSM9DS0 sensor. At every 5 seconds, the
application reads the "Who Am I" register from gyroscope sensor and
prints if the register value matches the expected value.
2015-12-21 08:06:14 -02:00
Ricardo de Almeida Gonzaga cc51f89b31 galileo: Add GPIO output example
This patch introduces an example application to demonstrate how to use
GPIO driver APIs to manipulate output pins. The application sets the
GPIO 4 pin as output pin and toggles its state at every half second.
2015-12-21 08:06:14 -02:00
Jesus Sanchez-Palencia b8056b9c97 examples: Add all-timers example
This commit adds a very simple example which is useful to verify
that all timers APIs are working. There are 3 protothreads running,
the first process tests etimer, timer and stimer APIs, the second
process tests the ctimer APIs, and the third one tests the rtimer
APIs.
2015-12-21 08:06:14 -02:00
Antonio Lignan 5e14c22c98 Add support for the RE-Mote on-board power management feature 2015-12-18 16:20:30 +01:00
Theo van Daele 654bb913f0 Add examples for NXP JN516x using TSCH 2015-12-17 13:29:42 +01:00
Antonio Lignan 834f965c95 Added support for the RE-Mote on-board Real Time Clock Calendar (RTCC) 2015-12-16 18:43:33 +01:00
Benoît Thébaudeau 4a6e19ed38 cc2538: pwm: Automatically disable PM1+ if running
The peripheral core clocks of the PWM timers are gated in PM1+, so these
power modes must be disabled if a PWM timer is running. Use
lpm_register_peripheral() to handle this automatically and dynamically.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-12-13 02:39:55 +01:00
Simon Duquennoy 7eabf8d391 TSCH: latest update from https://github.com/EIT-ICT-RICH/contiki 2015-12-04 15:21:58 +01:00
Simon Duquennoy f225ff43d3 Added TSCH+RPL example, with support for link-layer security and Orchestra scheduling 2015-12-04 15:21:54 +01:00
Simon Duquennoy bc17cdca2c Merge pull request #1408 from simonduq/pr/jn516x-update
JN516x: tickless clock, power saving update, 32 kHz rtimer
2015-12-03 14:59:53 +01:00
Simon Duquennoy bef32c20fb jn516x examples: print out network state periodically 2015-12-03 13:57:26 +01:00
Oliver Schmidt 7288a364b0 Fixed C&P error. 2015-12-03 09:09:21 +01:00
Oliver Schmidt 922bebc68a Some targets only return from getchar() on newline. 2015-12-02 18:27:54 +01:00
Oliver Schmidt 48d1d74f1c Fixed dacef46b03 2015-12-02 18:24:44 +01:00
Niclas Finne 3dd11603a7 Implementation of OMA LWM2M Engine / IPSO Objects 2015-12-02 15:40:05 +01:00
Antonio Lignan e47b309536 Added note in PWM driver and example about PM0 2015-11-30 09:43:35 +01:00
Harald Pichler c493bc6618 initial upload 2015-11-29 22:34:24 +01:00
Harald Pichler ba9d4ed578 add dallas ds1820 external sensor 2015-11-29 22:31:59 +01:00
Harald Pichler 67ed80e9fe move defines to servo.h 2015-11-28 18:45:15 +01:00
Antonio Lignan 37fcb927be Added PWM driver for the Zolertia Zoul module and CC2538 platforms 2015-11-25 23:56:29 +01:00
Marco Grella e47c69c170 Merge remote-tracking branch 'upstream/master' into stm32nucleo-spirit1 2015-11-25 12:36:01 +01:00
Antonio Lignan 830f5fb60d Fixed warnings in Z1 examples 2015-11-24 22:02:05 +01:00
George Oikonomou a30154c43e Fix code style: zoul examples 2015-11-24 21:15:34 +01:00
George Oikonomou be1bd9a619 Fix code style: Z1 websense example 2015-11-24 21:15:34 +01:00
George Oikonomou e1f6d39857 Fix code style: Z1 main examples 2015-11-24 21:15:34 +01:00
Antonio Lignan 27fd1a5eb8 Updated RE-Mote revision A support and cleaning up Zolertia platforms 2015-11-24 21:15:33 +01:00
Simon Duquennoy 673d1d103b JN516x: minor fixes 2015-11-21 10:23:15 +01:00
Harald Pichler 9b9958fb43 initial upload 2015-11-20 14:08:43 +01:00
Marco Grella 41f9ca08e2 Merge with updated master. 2015-11-11 13:42:35 +01:00
Simon Duquennoy 4c52b87ac1 Ported jn516x slip-bridge to new uip_fallback_interface 2015-11-10 09:30:36 +01:00
Simon Duquennoy dacef46b03 wget.c: replace deprecated gets with safe fgets 2015-11-10 09:09:31 +01:00
Simon Duquennoy fbd78a7e3b Merge pull request #1293 from simonduq/pr/fix-warnings
Fix a number of compiler warnings and enable -Werror in Travis
2015-11-10 08:49:11 +01:00
Oliver Schmidt 8e9da827c0 Several minor adjustments. 2015-11-03 22:09:24 +01:00
Oliver Schmidt fb5d0b7ef0 Made 80 column display a cc65 application attribute.
So far 80 column display was an attribute of a cc65 platform. Now each cc65 application can ask for 80 column display by defining WITH_80COL. Of course this is ignored by platforms incapable of 80 column display.

I see three types of application:

* Applications not benefitting from 80 column at all and in fact looking better with 40 column display. These are now using 40 column display. Examples: ethconfig, ipconfig

* Applications taking advantage of 80 column display if it is available without drawbacks. These stay as they were. Examples: Telnet server, web server, wget

* Applications needing 80 column display so urgently that it is likely desirable even if the display becomes harder to read. These come now in both flavors allowing the user to choose. Examples: IRC, web browser

Note: This change doesn't actually introduce any 80 column display with drawbacks. This if left to a subsequent change.
2015-10-30 12:42:58 +01:00
Marco Grella e261cda8dc Compilation flags update: BOARD=ids01a4/5 SENSORBOARD=iks01a1 2015-10-27 12:12:59 +01:00
Rémy Léone f2440235b5 Fix CSC & XML export to match .gitattributes 2015-10-22 16:05:40 +02:00
Benoît Thébaudeau bf41de1be5 Merge pull request #1078 from drandreas/cc2538-crypto
cc2538: Add PKA drivers, ECC algorithms and examples
2015-10-21 11:24:35 +02:00
Simon Duquennoy 2daa3d7377 Merge pull request #1269 from tadodotcom/tmp-uip-fallback-iface
More flexibility for the fallback interface
2015-10-20 11:33:14 +02:00
Simon Duquennoy 8f954fbab5 res-b1-sep-b2.c: fix type of iterator 2015-10-20 10:11:50 +02:00
Simon Duquennoy 1634acf2c4 jn516x examples: fix compiler warnings to enable -Wall -Werror compilation 2015-10-20 10:11:46 +02:00
Adam Dunkels 9b6377ecdc Fix compiler warnings 2015-10-20 10:11:37 +02:00
Adam Dunkels afe3612c0c Fix compiler warnings 2015-10-20 10:11:36 +02:00
Simon Duquennoy e3303c7e99 Added missing undef in examples/cc2528dk/sinffer/project-conf.h 2015-10-20 09:37:10 +02:00
Simon Duquennoy c8ec08732c Fix broken printf in examples/er-rest-example/resource/res-b1-sep-b2.c 2015-10-20 09:37:09 +02:00
Simon Duquennoy 9c15d1c42f Merge pull request #1063 from simonduq/configure-na
Default NDP configuration
2015-10-18 20:26:55 +02:00
Simon Duquennoy 10bd49a71a Merge pull request #756 from sieben/dos2unix
dos2unix fix
2015-10-18 20:26:07 +02:00
AntiCat d631270af4 cc2538: Add PKA drivers, ECC algorithms and examples 2015-10-18 20:14:17 +02:00
Konrad Krentz 0a6b1cb646 llsec: Added AEAD mode to CCM* 2015-10-14 08:22:44 -07:00
Konrad Krentz c656a4d1c5 llsec: Fixed style issues in CCM* 2015-10-14 08:22:44 -07:00
Konrad Krentz 2059b6559e llsec: Let llsec_drivers define their own framer 2015-10-14 08:21:40 -07:00
Marco Grella 4e81c87c3a Fix to sensor-demo license and Readme file. 2015-10-13 12:21:21 +02:00
Harald Pichler fd24ecd26e add index and struct for messured values 2015-10-11 15:30:30 +02:00
Harald Pichler e8471445ed add struct for sensors, add sketch.h 2015-10-11 15:22:49 +02:00
Marco Grella fc65757114 License headers and code style fixes. 2015-10-09 19:40:39 +02:00
Harald Pichler 0a4938243e cleanup resources 2015-10-08 21:14:43 +02:00
Harald Pichler 4ff973a0cc mult. DS18B20 Temp demo 2015-10-07 16:14:00 +02:00
Simon Duquennoy 2231cc9b0f Merge pull request #1266 from drugo72/avr-revival
AVR revival: new battery and temperature sensors and er-rest-example for the Raven
2015-09-28 17:52:26 +02:00
Simon Duquennoy 2834b41ed6 Merge pull request #1267 from drugo72/rest
REST:  new observable, periodic temperature resource
2015-09-28 17:52:05 +02:00
Mariano Alvira 94daacd244 Merge pull request #817 from SmallLars/econotag-ecc
Addet ECC functions on elliptic curve secp256r1.
2015-09-28 09:45:11 -05:00
Simon Duquennoy f9537b6355 Merge pull request #1219 from simonduq/jn516x-port
NXP JN516x Platform
2015-09-25 12:09:52 +02:00
Lars Schmertmann 17ff3bb466 Added ECC functions on elliptic curve secp256r1 2015-09-24 14:11:20 +02:00
Simon Duquennoy 0780e1a051 Added NXP JN516x examples 2015-09-23 14:38:41 +02:00
Víctor Ariño 76e293c289 Fixes ret value for output fallback iface in tun-bridge.c 2015-09-22 12:53:04 +02:00
Víctor Ariño 561e70b18e Updated current fallback_interface(s) to return int. 2015-09-22 12:53:04 +02:00
Cristiano De Alti 6e91cb3a39 Activate battery and temperature resources
if they are supported by the platform.
2015-09-21 23:20:45 +02:00
Cristiano De Alti ba3c167cef Add a new periodic temperature resource.
The temperature sensor is sampled once per second.
If observed, temperature readings are reported on change or every
Max-Age interval (default: 60s).
2015-09-21 23:12:16 +02:00
Cristiano De Alti 5a829d818d er-rest-example leveraging the new rave sensors. 2015-09-21 22:53:48 +02:00
Harald Pichler 1a309e6632 bugfix project conf, do not sleep git add project-conf.h 2015-09-21 16:09:28 +02:00
Harald Pichler a2e70d49f3 remove first space from converted string 2015-09-16 10:31:52 +02:00
Harald Pichler 6b41f23d59 make mcusleep variable, use mcusleepcycle 2015-09-15 09:52:06 +02:00
Lars Schmertmann 46ffc509c1 Added App/Tool/Example for usage of additional flash on econotag/mc1322x 2015-09-14 20:43:12 +02:00
Harald Pichler 7404e75213 bugfix float resources, save energy enabled 2015-09-14 16:55:18 +02:00
Harald Pichler e3ffbe36c8 bugfix printf and float 2015-09-14 10:51:16 +02:00
Harald Pichler 617d42663c add htu21d sensor and resources and set mesure inteval to 10 seconds 2015-09-11 21:41:24 +02:00
Ralf Schlatterbeck 7f09f96e88 Fix compile error
Wire.h is a C++ include-file and may not be within 'extern "C"'.
2015-09-11 15:10:28 +02:00
Marco Grella 87970a88a4 Comments and documentation fixes. 2015-09-10 14:28:08 +02:00
Marco Grella b7459a12c1 Added radio sensor. 2015-09-07 19:59:03 +02:00
Rémy Léone 7a5071dd30 Adding a gitattributes and correcting line-endings
https://help.github.com/articles/dealing-with-line-endings/
2015-09-07 15:40:02 +02:00
Marco Grella 17aafb9daa Align to current master 2015-09-04 17:01:04 +02:00
Harald Pichler 910dc981b5 initial upload 2015-09-04 14:04:11 +02:00
Nicolas Tsiftes 607303ecdd Merge pull request #1081 from pablocorbalan/light
Remove old unused light drivers
2015-08-28 14:13:00 +02:00
Adam Dunkels bfb29d2f11 Merge pull request #1116 from cetic/pr-uip-clear-buffer
Add uip_clear_buf() macro and replace all instances of uip_len = 0
2015-08-27 10:27:08 +02:00
Harald Pichler 500078ef9a update to contiki 3.0 2015-08-26 16:01:57 +02:00
Jonas Olsson 67045d4012 Export RSSI to default parent in the CC26xx web demo
The current version of the CC26xx web demo publishes over MQTT the default parent's IPv6 address and the last observed RSSI of this link. This is collected by active probing (periodic ping).

This commit brings the probing functionality to the example's main code module. The MQTT client keeps publishing as previously, but we now also export the same information through CoAP resources. Configuration is still possible through the example's web server.
2015-08-23 20:41:12 +01:00
Jonas Olsson bad7eb2bc8 Add a very sleepy CC26xx/CC13xx demo
This demonstraties how to combine CC13xx tick suppression, RPL leaf mode and turning off ContikiMAC duty cycling to build an extremely low-consuming firmware.
2015-08-23 20:41:12 +01:00
Jonas Olsson 72b586cb7d Modify cc26xx examples to play nicely with the CC13xx addition 2015-08-23 20:41:11 +01:00
Oliver Schmidt 902b21a326 Merge pull request #1188 from oliverschmidt/master
Some finishing touch on the CBM retro targets.
2015-08-08 16:33:59 +02:00
Oliver Schmidt 757809196e Some finishing touch on the CBM retro targets. 2015-08-08 15:41:24 +02:00
Pablo Corbalán 5db5524b7f Remove unneeded headers in sky-shell-exec 2015-08-04 20:39:09 +01:00
Joe Andrieu e0f72b9545 Clarified that a newline is needed for the echo 2015-07-26 16:17:34 -07:00
Marco Grella 86f35536a4 Added new stm32nucleo-spirit1 platform 2015-07-24 16:30:10 +02:00
Oliver Schmidt a0be26d9f1 Merge pull request #1150 from oliverschmidt/master
Several retrocomputing config changes.
2015-07-06 09:42:55 +02:00
Simon Duquennoy 3315d3069d Merge pull request #1108 from phoenix-frozen/generify-ccm-star
generalised CCM module into lib
2015-07-01 10:44:41 +02:00
Oliver Schmidt 00f9eebfab Changed Telnet server configuration for the Apple II.
Having the Telnet server reboot on exit (via ctrl-reset) allows to bring back the full MTU.
2015-06-28 22:25:28 +02:00
Oliver Schmidt a70fbf1bbf Reconfigured Telnet server.
In order to have the wget command make some sense the write command should be present too.
- On the Apple][ reduction of the MTU seems to gain just enough RAM to have the (rather heavy-weight) full-blown C library file I/O working.
- On the C128 there's way too little RAM so there's no wget command but only the file commands.
- On the CBMs a dummy lseek() was necessary to have the read command link.
2015-06-21 21:07:41 +02:00
Oliver Schmidt fc9d38caba Reduced default for number of connections.
Save some memory by reducing the the default for number of connections from 10 to 2.
2015-06-21 20:58:51 +02:00
Laurent Deru 1f0fd3f38b Add uip_ext_len definition in fakeuip.c for ravenusbstick 2015-06-15 15:15:59 +02:00
Laurent Deru 1784338b2e Add uip_clear_buf() macro and replace all instances of uip_len = 0; with it 2015-06-15 11:10:51 +02:00
Justin King-Lacroix 3ce8f26eea generalised CCM module into lib
introduced convenience functions for LLSEC modules
2015-06-10 18:07:41 +01:00
Benoît Thébaudeau e8a268cd15 cc2538: aes: Add support for 192- and 256-bit keys
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:56 +02:00
Benoît Thébaudeau 801315e819 cc2538: aes: Make it possible to have several keys stored at once
Several keys can be kept at the same time in the key store, and several
keys can be loaded at once. Give access to these features.

The ccm-test example is also improved to better demonstrate the use of
the key store.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau b92a5afcc4 cc2538: ccm: Make it possible to use the interrupt
Using the AES interrupt allows the user process not to waste time
polling for the completion of the operation. This time can be used by
the user process to do something else, or to let the system enter PM0.

Since the system is now free to perform various operations during a
crypto operation, a protection of the crypto resource is added, and PM1+
is prohibited in order not to stall crypto operations.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:07 +02:00
Benoît Thébaudeau 117dc4e5e3 cc2538: Add crypto drivers and examples for AES-CCM and SHA-256
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
2015-06-02 21:41:06 +02:00
Antonio Lignan 330e450ba4 Zolertia Re-Mote platform ported to Contiki, developed whitin RERUM FP7 European project (grant #609094).
The port was done jointly by Zolertia and George Oikonomou (University of Bristol).
2015-05-29 22:04:43 +02:00
Harald Pichler 72c6c2c492 bugfix add status led 2015-05-21 22:14:39 +02:00
Harald Pichler 9b6bdd30b8 use all submodules 2015-05-21 21:31:18 +02:00
Antonio Lignan 2cee62eb33 Merge pull request #1074 from g-oikonomou/cc26xx/contrib/new-cc26xxware
Update to latest CC26xxware and add it as a submodule
2015-05-21 10:01:00 +02:00
Harald Pichler 6a0d407806 Merge branch 'contiki' into osd 2015-05-19 10:54:55 +02:00
Adam Dunkels 730bda2001 Merge pull request #883 from cmorty/pull/global-macros
Move MAX, MIN and ABS to contiki-macros
2015-05-18 21:33:00 +02:00
Moritz 'Morty' Strübe 0dab6926b3 Move MAX, MIN and ABS to sys/cc.h 2015-05-18 08:53:17 +02:00
George Oikonomou 5f4154a0e3 Adjust AON BatMon usage 2015-05-17 14:09:51 +01:00
Antonio Lignan 32afadea77 Merge pull request #1047 from g-oikonomou/cc26xx/contrib/lpm
CC26xx Ultra Low Power Operation
2015-05-16 10:27:22 +02:00
Harald Pichler 82d03d0ebf bugfix no framer 2015-05-15 20:59:59 +02:00
Harald Pichler 877bf27f5a Merge branch 'contiki' into osd 2015-05-15 20:48:26 +02:00
Antonio Lignan 402eabecca Merge pull request #929 from lab11/delete-old-coap
Delete old CoAP implementation
2015-05-15 15:49:04 +02:00
George Oikonomou 7e00eeb76a Achieve lowest consumption with the CC26xx demo:
This changes the CC26xx simple demo so that a devices running this firmware will achieve the lowest possible energy consumption without requiring any changes to the example
2015-05-15 09:21:05 +01:00
George Oikonomou 421fbfae25 Change the LPM locks API:
Instead of using a separate data structure to request that a PD remain powered during deep sleep,
we do the same within the main LPM data structure through an additional field.

This allows us to maintain only one linked list of LPM modules and overall improves code clarity
2015-05-15 09:21:02 +01:00
George Oikonomou 00a6c31158 Improve OPT sensor driver and usage
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
Antonio Lignan b50ae639b3 Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Brad Campbell 869768902b seedeye powerswitch: update coap
The powerswitch app was using old an older implementation of er-coap.
This updates it.
2015-05-14 17:20:46 -04:00
Brad Campbell 6eaada0c3f Delete old CoAP implementation
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
George Oikonomou e4722bb0ea Replace SHT21 with HDC1000 in the web demo 2015-05-14 13:20:39 +01:00
George Oikonomou 62f978b993 Replace SHT21 with HDC1000 in the simple demo 2015-05-14 13:20:39 +01:00
George Oikonomou 11a5e0a49a Merge pull request #1051 from simonduq/fix-warning
Fixed a number of compiler warnings
2015-05-13 00:52:40 +01:00
George Oikonomou 49d1782a06 Adjust the MQTT demo to use re-engineered sensors 2015-05-12 23:42:20 +01:00
George Oikonomou ac459df128 Re-work the CC2538 demo to use the 3 separate ADC sensors 2015-05-12 23:42:20 +01:00
Simon Duquennoy 1ac5d85042 Enable NA in examples that need it 2015-05-10 19:56:38 +02:00
Nicolas Tsiftes 44af0fa66b Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
Adam Dunkels bc222ed85c Code for building an IP64 router 2015-05-10 10:51:11 +02:00
Adam Dunkels 33372945a3 HTTP socket code with support for GET and POST 2015-05-10 10:51:11 +02:00
George Oikonomou 447be526ae Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou 6e3197b0bf Merge pull request #1008 from g-oikonomou/cc26xx/contrib/web-demo-httpd
Improve HTTPD in the CC26xx web demo
2015-05-09 22:46:26 +01:00
George Oikonomou bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
George Oikonomou 33526be5ab Merge pull request #985 from g-oikonomou/cc26xx-minor-updates
Minor Updates to the CC26xx Port
2015-05-09 22:29:30 +01:00
George Oikonomou 38b3b8b74a Merge pull request #981 from g-oikonomou/cc2538-sniffer-fix
Turn on the CC2538 RF explicitly in the sniffer example
2015-05-09 21:56:23 +01:00
Simon Duquennoy 4a93f5148d Fixed a number of compiler warnings 2015-05-08 09:07:20 +02:00
Simon Duquennoy 290fc829ea Consistently use PACKETBUF_ATTR_MAC_SEQNO for MAC sequence number, both input and output. Disable PACKETBUF_ATTR_PACKET_ID in the non-Rime case. 2015-05-06 16:34:44 +02:00
Simon Duquennoy bb76bb8beb Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled. 2015-05-06 16:34:26 +02:00
George Oikonomou f83c4e7286 Improve code style 2015-05-03 22:36:03 +01:00
Nicolas Tsiftes f7ca4b41a9 Merge pull request #1001 from adamdunkels/pr/queuebuf-no-ref
Cleanup: remove the obsolete reference packetbuf
2015-05-03 16:35:17 +02:00
George Oikonomou a72d90e283 Control TCP MSS in the project's conf 2015-05-03 13:31:03 +01:00
Harald Pichler b2847f4756 add coap18 2015-04-29 15:58:42 +02:00
Harald Pichler b97d6878c0 add coap18 2015-04-28 20:56:52 +02:00
Harald Pichler a1423c28fc add coap18 2015-04-28 19:53:43 +02:00
Harald Pichler 12fe0d8442 change to coap18 2015-04-22 14:18:10 +02:00
David Rabel 65c50195c4 ressource handlers for servos corrected 2015-04-03 15:46:05 +02:00
David Rabel 0980393d22 Fix servo example 2015-04-03 14:31:25 +02:00
David Rabel 3ba9009f50 Use servo instead of t4-servo 2015-04-03 14:29:52 +02:00