deac/osd-contiki
1
0
Fork 0
Code Issues Pull requests Releases Wiki Activity
6037 commits 6 branches 13 tags 80 MiB
Commit graph

590 commits

Author SHA1 Message Date
dak664
013c3ac2f8 Remove contitional on clock updating, it should always be done after a sleep! 2010-12-22 17:09:03 +00:00
dak664
44a2e34005 Resolve TIMER2 conflict between sleep and possible clock usage. 2010-12-22 16:50:30 +00:00
dak664
e3e1e04948 Add FCS comments and text2pcap dump routines of Roger Larsson. 
Don't send last two byte to xmit buffer since they will be overwritten by the checksum anyway.
 2010-12-21 04:25:15 +00:00
dak664
e4b0b3dc8c Disable watchdog software counter. Nested watchdog stop/starts will not work, but the low power protocols will. 2010-12-18 20:51:11 +00:00
dak664
5623ad827b Enable radio off and sleep modes. 2010-12-18 20:49:00 +00:00
adamdunkels
f370b217a5 Turned up the rtimer resolution to 32678 Hz. 2010-12-16 22:50:21 +00:00
adamdunkels
1d090ea0f5 Made configuration of CC2420 SFD timestamps easier 2010-12-16 22:49:33 +00:00
adamdunkels
c0fedd7661 Store timestamps in the cc2420 module instead of the cc2420-arch-sfd module 2010-12-16 22:49:12 +00:00
dak664
570f6e705f Move conditional needed by previous commit. 2010-12-15 19:32:49 +00:00
dak664
aa7ad8c807 Add rf230_listen_channel routine to force RX_ON state for sniffing and to read rssi for energy scan. 2010-12-15 16:50:44 +00:00
salvopitru
d0db3fc39a Added a check for Coffee start address. 2010-12-15 15:01:00 +00:00
dak664
1cc336f188 Conditional code to use hardware multiply by default. 2010-12-15 14:11:06 +00:00
salvopitru
5fe80dd99d Added elfloader machine dependent code for STM32W. 2010-12-15 11:10:20 +00:00
dak664
c784e8bc46 Enable RX_START interrupt and read rssi at end of preamble when not using energy detect register 2010-12-14 22:34:18 +00:00
dak664
9c9d7ec5e9 Return TRAC_STATUS register when tx autoretry is enabled. 2010-12-05 17:28:29 +00:00
dak664
35b2ce0cdb Add status page link, show correct rssi, fix indexing off array in ipv4 builds 2010-12-04 21:32:35 +00:00
dak664
58b7a19803 Hardware/software radio HAL patch from Roger Larsson. 
Use CHANNEL_802_15_4 define for RF channel on all AVR platforms, default 26.
Remove hopefully unnecessary interrupt disable wrapper on eeprom reads and writes.
 2010-12-03 20:42:01 +00:00
dak664
21b10e8021 Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schfer 2010-12-03 18:16:56 +00:00
dak664
0ba9846abd Add macros by Roger Larsson to select between hardware or software SPI transactions. 
Minor speed optimizations.
 2010-11-30 19:47:40 +00:00
nifi
7110afdad5 added missing include 2010-11-27 15:27:20 +00:00
dak664
dc028b3f85 Get rssi correctly in either rx mode, clean up radio driver debugging 2010-11-26 20:39:15 +00:00
adamdunkels
149f4e8d21 Enable the watchdog for rtimers too. Removed the disabling of the TACTL - it should not be needed, and interferes with the timing behaviour of stable rtimers 2010-11-25 09:22:56 +00:00
dak664
880233a451 RSSI read fix (use ED register in AACK mode), add reduced power configuration for miniature mesh testing. 2010-11-24 18:46:57 +00:00
adamdunkels
4fac3037e0 Fixed a bug found by Moritz Straube - writing to the internal flash would lock up contikimac. The problem was due to the IFG1 being reset to zero before writing to flash. 2010-11-15 21:52:54 +00:00
dak664
69ef9d57eb sizeof(*) is sizeof first array element 2010-11-12 17:24:36 +00:00
dak664
9e94ba9803 Allow non-ipv6 build, e.g. Hello World 2010-11-12 17:15:00 +00:00
nifi
5de83c9085 Only include code for stack printouts when needed 2010-11-12 15:54:41 +00:00
maralvira
3426eae031 fix typos 2010-11-11 20:37:33 +00:00
maralvira
9b2a2bb5e6 fix up stdint include 2010-11-10 22:12:29 +00:00
maralvira
6da84819dd use stdint.h instead of custom types.h 
stdint.h is more portable across compilers
 2010-11-10 22:06:28 +00:00
maralvira
e229022f38 include crm.h 2010-11-10 21:58:12 +00:00
salvopitru
28e1445a0f Added a simple implementation of Coffee for STM32W108. 2010-11-10 11:20:44 +00:00
maralvira
dfbc81158b Allow CROSS to be overridden with CROSS or CROSS_COMPILE 2010-11-09 13:13:45 +00:00
maralvira
1aac14f252 add tutorial explaining how to set up an RPL network of econotags 2010-11-09 01:30:01 +00:00
maralvira
3b515587c5 change how prepare and transmit work --- Contiki expects to call 
prepare once and then transmit many times to repeat the same packet
over and over. This didn't work like that, but now it does.
 2010-11-07 20:07:42 +00:00
maralvira
e029fa8da0 fix defines for raw mode 2010-11-07 18:34:52 +00:00
maralvira
4664151419 fix build errors with start.S 2010-11-07 15:19:45 +00:00
maralvira
29333232d5 add section .start and undef _start so that _start is placed by the 
linker correctly
 2010-11-07 14:57:53 +00:00
maralvira
b8ebce0fef add a memory section for RAM so that the linker will warn when you've 
made your program too big.
 2010-11-07 14:54:05 +00:00
maralvira
8385536c41 fix how start object is linked 2010-11-07 14:52:23 +00:00
maralvira
f38598ce9f clear BSS 2010-11-07 14:49:42 +00:00
maralvira
57513948c9 Move stack near BSS so it doesn't take up space in the .bin 2010-11-07 14:48:52 +00:00
maralvira
77cf0f0f5e update ring_osc_on and _off to the new bit structs 2010-11-07 14:42:31 +00:00
maralvira
c8056cc4e2 define TCF TCF1 and TCF2 --- the new bit structs don't work here for 
some reason.
 2010-11-07 14:42:02 +00:00
maralvira
dab7faf13c Add gpio_set and gpio_reset 
Use them like gpio_set(GPIO_xx) and gpio_reset(GPIO_xx).
These macros efficiently set the DATA_SET and DATA_RESET bits without
reading the registers first, as a direct GPIO->DATA_SET.GPIO_xx would do
 2010-11-07 14:29:04 +00:00
maralvira
4a4a39c84a Name the GPIO structure so we can set multiple bits at once 2010-11-07 14:28:30 +00:00
maralvira
4217eb2ebc Provide a function to change timer interrrupt handlers 
Function irq_register_timer_handler(int timer, void (*isr)(void))
lets you change the handler at runtime.  This lets us set handlers
without necessarily knowing the name at link-time.  The old way of
having weakly-linked tmr0_isr functions should still work.
 2010-11-07 14:27:01 +00:00
maralvira
65d3942c76 Add the disable_int({}) macro 
This is similar to safe_irq_enable and disable
 2010-11-07 14:26:24 +00:00
maralvira
83e6995af1 Add TMR_ADDR helper 2010-11-07 14:25:07 +00:00
maralvira
d930ce0e2b Add some useful timer macros 2010-11-07 14:24:36 +00:00