initial upload

This commit is contained in:
Harald Pichler 2016-10-13 12:36:53 +02:00
parent 8f5a033c48
commit e4ab78369e
16 changed files with 1150 additions and 0 deletions

View file

@ -0,0 +1,70 @@
# Set this to the name of your sketch (without extension .pde)
SKETCH=sketch
EXE=arduino-example
all: $(EXE)
CONTIKI=../../..
# Contiki IPv6 configuration
CONTIKI_WITH_IPV6 = 1
CFLAGS += -DPROJECT_CONF_H=\"project-conf.h\"
PROJECT_SOURCEFILES += ${SKETCH}.cpp
# automatically build RESTful resources
REST_RESOURCES_DIR = ./resources
REST_RESOURCES_DIR_COMMON = ../resources-common
REST_RESOURCES_FILES= $(notdir \
$(shell find $(REST_RESOURCES_DIR) -name '*.c') \
$(shell find $(REST_RESOURCES_DIR_COMMON) -name '*.c') \
)
PROJECTDIRS += $(REST_RESOURCES_DIR) $(REST_RESOURCES_DIR_COMMON)
PROJECT_SOURCEFILES += $(REST_RESOURCES_FILES)
# variable for Makefile.include
ifneq ($(TARGET), minimal-net)
CFLAGS += -DUIP_CONF_IPV6_RPL=1
else
# minimal-net does not support RPL under Linux and is mostly used to test CoAP only
${info INFO: compiling without RPL}
CFLAGS += -DUIP_CONF_IPV6_RPL=0
CFLAGS += -DHARD_CODED_ADDRESS=\"fdfd::10\"
${info INFO: compiling with large buffers}
CFLAGS += -DUIP_CONF_BUFFER_SIZE=2048
CFLAGS += -DREST_MAX_CHUNK_SIZE=1024
CFLAGS += -DCOAP_MAX_HEADER_SIZE=640
endif
# linker optimizations
SMALL=1
# REST Engine shall use Erbium CoAP implementation
APPS += er-coap
APPS += rest-engine
APPS += arduino
include $(CONTIKI)/Makefile.include
include $(CONTIKI)/apps/arduino/Makefile.include
$(CONTIKI)/tools/tunslip6: $(CONTIKI)/tools/tunslip6.c
(cd $(CONTIKI)/tools && $(MAKE) tunslip6)
connect-router: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 aaaa::1/64
connect-router-cooja: $(CONTIKI)/tools/tunslip6
sudo $(CONTIKI)/tools/tunslip6 -a 127.0.0.1 aaaa::1/64
connect-minimal:
sudo ip address add fdfd::1/64 dev tap0
avr-size: $(EXE).$(TARGET).sz
flash: $(EXE).$(TARGET).u $(EXE).$(TARGET).eu
.PHONY: flash avr-size
.PRECIOUS: $(EXE).$(TARGET).hex $(EXE).$(TARGET).eep

View file

@ -0,0 +1,11 @@
Arduino compatibility example
=============================
This example shows that it is now possible to re-use arduino sketches in
Contiki. This example documents the necessary magic. Arduino specifies
two routines, `setup` and `loop`. Before `setup` is called, the
framework initializes hardware. In original Arduino, all this is done in
a `main` function (in C). For contiki we define a process that does the
same.
See the documentation file in apps/contiki-compat/README.md

View file

@ -0,0 +1,2 @@
#include <arduino-process.h>
AUTOSTART_PROCESSES(&arduino_sketch);

View file

@ -0,0 +1,2 @@
#!/bin/bash
make TARGET=osd-merkur-128 flash

View file

@ -0,0 +1,99 @@
/*
* Copyright (c) 2010, Swedish Institute of Computer Science.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*
*/
#ifndef PROJECT_RPL_WEB_CONF_H_
#define PROJECT_RPL_WEB_CONF_H_
#define PLATFORM_HAS_LEDS 1
//#define PLATFORM_HAS_BUTTON 1
#define PLATFORM_HAS_BATTERY 1
/* For Debug: Dont allow MCU sleeping between channel checks */
//#undef RDC_CONF_MCU_SLEEP
//#define RDC_CONF_MCU_SLEEP 0
/* Disabling RDC for demo purposes. Core updates often require more memory. */
/* For projects, optimize memory and enable RDC again. */
//#undef NETSTACK_CONF_RDC
//#define NETSTACK_CONF_RDC nullrdc_driver
//#undef NETSTACK_CONF_MAC
//#define NETSTACK_CONF_MAC nullmac_driver
/* Increase rpl-border-router IP-buffer when using more than 64. */
//#undef REST_MAX_CHUNK_SIZE
//#define REST_MAX_CHUNK_SIZE 64
/* Estimate your header size, especially when using Proxy-Uri. */
/*
#undef COAP_MAX_HEADER_SIZE
#define COAP_MAX_HEADER_SIZE 70
*/
/* The IP buffer size must fit all other hops, in particular the border router. */
#undef UIP_CONF_BUFFER_SIZE
#define UIP_CONF_BUFFER_SIZE 256
/* Multiplies with chunk size, be aware of memory constraints. */
#undef COAP_MAX_OPEN_TRANSACTIONS
#define COAP_MAX_OPEN_TRANSACTIONS 4
/* Must be <= open transaction number, default is COAP_MAX_OPEN_TRANSACTIONS-1. */
/*
#undef COAP_MAX_OBSERVERS
#define COAP_MAX_OBSERVERS 2
*/
/* Filtering .well-known/core per query can be disabled to save space. */
/*
#undef COAP_LINK_FORMAT_FILTERING
#define COAP_LINK_FORMAT_FILTERING 0
*/
/*
#undef LLSEC802154_CONF_ENABLED
#define LLSEC802154_CONF_ENABLED 1
#undef NETSTACK_CONF_FRAMER
#define NETSTACK_CONF_FRAMER noncoresec_framer
#undef NETSTACK_CONF_LLSEC
#define NETSTACK_CONF_LLSEC noncoresec_driver
#undef NONCORESEC_CONF_SEC_LVL
#define NONCORESEC_CONF_SEC_LVL 1
#define NONCORESEC_CONF_KEY { 0x00 , 0x01 , 0x02 , 0x03 , \
0x04 , 0x05 , 0x06 , 0x07 , \
0x08 , 0x09 , 0x0A , 0x0B , \
0x0C , 0x0D , 0x0E , 0x0F }
*/
#endif /* PROJECT_RPL_WEB_CONF_H_ */

View file

@ -0,0 +1,104 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_led,
"title=\"LED: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
extern uint8_t led_pin;
extern uint8_t led_status;
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", led_status);
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", led_status);
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
digitalWrite(led_pin, LOW);
led_status=1;
} else if(strncmp(mode, "off", len) == 0) {
digitalWrite(led_pin, HIGH);
led_status=0;
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay1,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_1));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_1));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_1,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_1,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay2,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_2));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_2));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_2,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_2,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay3,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_3));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_3));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_3,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_3,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay4,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_4));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_4));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_4,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_4,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay5,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_5));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_5));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_5,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_5,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay6,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_6));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_6));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_6,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_6,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay7,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_7));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_7));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_7,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_7,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,100 @@
/*
* Copyright (c) 2013, Institute for Pervasive Computing, ETH Zurich
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This file is part of the Contiki operating system.
*/
/**
* \file
* Door resource
* \author
* Harald Pichler <harald@the-develop.net>
*/
#include "contiki.h"
#include <string.h>
#include "rest-engine.h"
#include "Arduino.h"
#include "dev/relay-sensor.h"
static void res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
static void res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset);
/* A simple getter example. Returns the reading from the sensor with a simple etag */
RESOURCE(res_relay8,
"title=\"Relay: , POST/PUT mode=on|off\";rt=\"Control\"",
res_get_handler,
res_post_put_handler,
res_post_put_handler,
NULL);
static void
res_get_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
unsigned int accept = -1;
REST.get_header_accept(request, &accept);
if(accept == -1 || accept == REST.type.TEXT_PLAIN) {
REST.set_header_content_type(response, REST.type.TEXT_PLAIN);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "%d", relay_sensor.value(RELAY_SENSOR_8));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else if(accept == REST.type.APPLICATION_JSON) {
REST.set_header_content_type(response, REST.type.APPLICATION_JSON);
snprintf((char *)buffer, REST_MAX_CHUNK_SIZE, "{'led':%d}", relay_sensor.value(RELAY_SENSOR_8));
REST.set_response_payload(response, buffer, strlen((char *)buffer));
} else {
REST.set_response_status(response, REST.status.NOT_ACCEPTABLE);
const char *msg = "Supporting content-types text/plain and application/json";
REST.set_response_payload(response, msg, strlen(msg));
}
}
static void
res_post_put_handler(void *request, void *response, uint8_t *buffer, uint16_t preferred_size, int32_t *offset)
{
size_t len = 0;
const char *mode = NULL;
int success = 1;
if(success && (len = REST.get_post_variable(request, "mode", &mode))) {
if(strncmp(mode, "on", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_8,1);
} else if(strncmp(mode, "off", len) == 0) {
relay_sensor.configure(RELAY_SENSOR_8,0);
} else {
success = 0;
}
} else {
success = 0;
} if(!success) {
REST.set_response_status(response, REST.status.BAD_REQUEST);
}
}

View file

@ -0,0 +1,5 @@
#!/bin/bash
# For the ages-old bootloader (before 2014) you want to use
# BOOTLOADER_GET_MAC=0x0001f3a0 as parameter to make below.
make clean TARGET=osd-merkur-128
make TARGET=osd-merkur-128

View file

@ -0,0 +1,57 @@
/*
* Sample arduino sketch using contiki features.
* We turn the LED off
* We allow read the moisture sensor
* Unfortunately sleeping for long times in loop() isn't currently
* possible, something turns off the CPU (including PWM outputs) if a
* Proto-Thread is taking too long. We need to find out how to sleep in
* a Contiki-compatible way.
* Note that for a normal arduino sketch you won't have to include any
* of the contiki-specific files here, the sketch should just work.
*/
extern "C" {
#include "arduino-process.h"
#include "rest-engine.h"
#include "net/netstack.h"
#include "dev/relay-sensor.h"
extern resource_t res_led, res_battery, res_cputemp,
res_relay1, res_relay2, res_relay3, res_relay4,
res_relay5, res_relay6, res_relay7, res_relay8;
uint8_t led_pin=4;
uint8_t led_status;
}
void setup (void)
{
// switch off the led
pinMode(led_pin, OUTPUT);
digitalWrite(led_pin, HIGH);
led_status=0;
// init relay
SENSORS_ACTIVATE(relay_sensor);
// init coap resourcen
rest_init_engine ();
#pragma GCC diagnostic ignored "-Wwrite-strings"
rest_activate_resource (&res_led, "s/led");
rest_activate_resource (&res_battery, "s/battery");
rest_activate_resource (&res_cputemp, "s/cputemp");
rest_activate_resource (&res_relay1, "relay/1");
rest_activate_resource (&res_relay2, "relay/2");
rest_activate_resource (&res_relay3, "relay/3");
rest_activate_resource (&res_relay4, "relay/4");
rest_activate_resource (&res_relay5, "relay/5");
rest_activate_resource (&res_relay6, "relay/6");
rest_activate_resource (&res_relay7, "relay/7");
rest_activate_resource (&res_relay8, "relay/8");
#pragma GCC diagnostic pop
NETSTACK_MAC.off(1);
}
void loop (void)
{
}