added guhRF; added atmega256rfr2 support

platform/RaspBee/params.h

@@ -0,0 +1,105 @@
+#ifndef PARAMS_H_
+#define PARAMS_H_
+/* PARAMETER_STORAGE =
+ * 0 Hard coded, minmal program and eeprom usage.
+ * 1 Stored in fixed eeprom locations, rewritten from flash if corrupt.
+ *   This allows parameter changes using a hardware programmer or custom application code.
+ *   Corruption test is based on channel verify so get the channel before anything else!
+ * 2 Obtained from eeprom using the general settings manager and read from program flash if not present.
+ *   Useful for for testing builds without wearing out flash memory.
+ * 3 Obtained from eeprom using the settings manager and rewritten from flash if not present.
+ *   This ensures all parameters are present in upper eeprom flash.
+ *
+ * Note the parameters in this file can be changed without forcing a complete rebuild.
+ */
+// default settings
+#define CHANNEL_802_15_4          26     // default frequency (11-26) 
+
+// end default settings
+
+#define CONTIKI_CONF_RANDOM_MAC 1        //adds 78 bytes
+#define CONTIKI_CONF_SETTINGS_MANAGER 0  //adds 1696 bytes
+#define BOOTLOADER_GET_MAC 0             // get mac form boolaoder, need bootlaoder bonsai, PARAMETER_STORAGE 0
+
+#if CONTIKI_CONF_SETTINGS_MANAGER
+//#define PARAMETER_STORAGE 2
+#define PARAMETER_STORAGE 2
+#else
+//#define PARAMETER_STORAGE 1
+#define PARAMETER_STORAGE 1           // get mac form boolaoder, need bootlaoder bonsai, PARAMETER_STORAGE 0
+#endif
+
+/* Include settings.h, then dummy out the write routines */
+#include "settings.h"
+#if PARAMETER_STORAGE==2
+#define settings_add(...) 0
+#define settings_add_uint8(...) 0
+#define settings_add_uint16(...) 0
+#endif
+
+#if AVR_WEBSERVER
+/* Webserver builds can set some defaults in httpd-fsdata.c via makefsdata.h */
+extern uint8_t eemem_mac_address[8];
+extern uint8_t eemem_server_name[16];
+extern uint8_t eemem_domain_name[30];
+#endif
+#ifdef SERVER_NAME
+#define PARAMS_SERVERNAME SERVER_NAME
+#else
+#define PARAMS_SERVERNAME "ATMEGA256rfr2"
+#endif
+#ifdef DOMAIN_NAME
+#define PARAMS_DOMAINNAME DOMAIN_NAME
+#else
+#define PARAMS_DOMAINNAME "localhost"
+#endif
+#ifdef NODE_ID
+#define PARAMS_NODEID NODE_ID
+#else
+#define PARAMS_NODEID 0
+#endif
+#ifdef IEEE802154_PANADDR
+#define PARAMS_PANADDR IEEE802154_PANADDR
+#else
+#define PARAMS_PANADDR 0
+#endif
+#ifdef RF230_MAX_TX_POWER
+#define PARAMS_TXPOWER RF230_MAX_TX_POWER
+#else
+#define PARAMS_TXPOWER 0
+#endif
+#ifdef EUI64_ADDRESS
+#define PARAMS_EUI64ADDR EUI64_ADDRESS
+#else
+/* This form of of EUI64 mac allows full 6LoWPAN header compression from mac address */
+#if UIP_CONF_LL_802154
+//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN, 0xNN}
+//#define PARAMS_EUI64ADDR {0x00, 0x21, 0x2e, 0xff, 0xff, 0x00, 0x1E, 0xFB}
+#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x01}
+#else
+//#define PARAMS_EUI64ADDR {0x02, 0xNN, 0xNN, 0xff, 0xfe, 0xNN, 0xNN, 0xNN}
+#define PARAMS_EUI64ADDR {0x00, 0x00, 0x00, 0xff, 0xfe, 0x00, 0x00, 0x03}
+#endif
+/* This form of of EUI64 mac allows 16 bit 6LoWPAN header compression on multihops */
+//#define PARAMS_EUI64ADDR {0x02, 0x00, 0x00, 0xff, 0xfe, 0x00, 0xNN, 0xNN}
+#endif
+
+uint8_t params_get_eui64(uint8_t *eui64);
+#if PARAMETER_STORAGE==0
+/* Hard coded program flash parameters */
+#define params_get_servername(...) 
+#define params_get_nodeid(...)  PARAMS_NODEID
+#define params_get_channel(...) CHANNEL_802_15_4
+#define params_get_panid(...)   IEEE802154_PANID
+#define params_get_panaddr(...) PARAMS_PANADDR
+#define params_get_txpower(...) PARAMS_TXPOWER
+#else
+/* Parameters stored in eeprom */
+uint16_t params_get_nodeid(void);
+uint8_t params_get_channel(void);
+uint16_t params_get_panid(void);
+uint16_t params_get_panaddr(void);
+uint8_t params_get_txpower(void);
+#endif
+
+#endif /* PARAMS_H_ */